journal article·2018-09-24

Transparent Quasi-Interdigitated Electrodes for Semitransparent Perovskite Back-Contact Solar Cells

Giovanni DeLuca, Askhat N. Jumabekov, Yinghong Hu, Alexandr N. Simonov, Jianfeng Lu, Boer Tan, Gede W. P. Adhyaksa, Erik C. Garnett, Elsa Reichmanis, Anthony S. R. Chesman, Udo Bach

ACS Applied Energy Materials· Volume 1· Issue 9
Publisher page

Abstract

Transparent quasi-interdigitated electrodes (t-QIDEs) were produced by replacing the opaque components of existing QIDEs with indium tin oxide (ITO). We demonstrate their application in the first semitransparent back-contact perovskite solar cell. A device with a VOC of 0.88 V and a JSC of 5.6 mA cm–2 produced a modest 1.7% efficiency. The use of ITO allows for illumination of the device from front and rear sides, resembling a bifacial solar cell, both of which yield comparable efficiencies. Coupled optoelectronic simulations reveal this architecture may achieve power conversion efficiencies of up to 11.5% and 13.3% when illuminated from the front and rear side, respectively, using a realistic quality of perovskite material.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Chemistry and Biochemistry, Georgia Institute of Technology, Atlanta, Georgia 30332, United States

CSIRO Manufacturing, Clayton, Victoria 3168, Australia

Department of Chemical Engineering, Monash University, Clayton, Victoria 3800, Australia

Department of Chemistry and Center for NanoScience (CeNS), LMU Munich, 80539 Munich, Germany

School of Chemistry, Monash University, Clayton, Victoria 3800, Australia

ARC Centre of Excellence for Electromaterials Science, Monash University, Clayton, Victoria 3800, Australia

Center for Nanophotonics, AMOLF, 1098 XG Amsterdam, The Netherlands

School of Chemical and Biomolecular Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332, United States

Melbourne Centre for Nanofabrication, Clayton, Victoria 3168, Australia

ARC Centre of Excellence for Exciton Science, Monash University, Clayton, Victoria 3800, Australia

Funding

Georgia Institute of Technology · Deutsche Forschungsgemeinschaft · Australian Research Council · Commonwealth Scientific and Industrial Research Organisation · Bayerisches Staatsministerium f?r Bildung und Kultus, Wissenschaft und Kunst · Division of Electrical, Communications and Cyber Systems · Australian Renewable Energy Agency · FP7 Ideas: European Research Council · Office of International Science and Engineering · Australian Centre for Advanced Photovoltaics · Brook Byers Institute for Sustainable Systems, Georgia Institute of Technology

References (16)

Show source-provided references
1. 10.1038/nenergy.2017.3210.1038/nenergy.2017.32 ↗
2. 10.1021/acs.nanolett.7b0109210.1021/acs.nanolett.7b01092 ↗
3. 10.1016/j.solmat.2017.03.02810.1016/j.solmat.2017.03.028 ↗
4. 10.1039/C6TC00681G10.1039/C6TC00681G ↗
5. 10.1002/pip.288110.1002/pip.2881 ↗
6. Hartnagel H. · 1995
7. 10.1126/science.120299210.1126/science.1202992 ↗
8. 10.1016/j.tsf.2011.08.06010.1016/j.tsf.2011.08.060 ↗
9. 10.1016/j.apsusc.2007.07.14610.1016/j.apsusc.2007.07.146 ↗
10. 10.1039/C5EE03874J10.1039/C5EE03874J ↗
11. 10.1038/ncomms1383110.1038/ncomms13831 ↗
12. 10.1039/C4EE01389A10.1039/C4EE01389A ↗
13. 10.1016/j.nanoen.2015.02.02810.1016/j.nanoen.2015.02.028 ↗
14. 10.1038/nmat392110.1038/nmat3921 ↗
15. 10.1039/c3ee40860d10.1039/c3ee40860d ↗
16. 10.1016/j.nanoen.2016.10.01110.1016/j.nanoen.2016.10.011 ↗