Effect of heating temperature on dielectric properties of Pb(Zr,Ti)O3 [PZT] fibers
Source abstract
Abstract
Ferroelectric Pb(Zr0.53Ti0.47)O3 fibers were reproducibly fabricated by sol-gel technique using triethanolamine (TEA) complexed alkoxide. The phase transition from pyrochlore to perovskite took place about 400°C and a stable single perovskite phase was obtained at 550°C. PZT gel fibers spun through nozzle were heat-treated at 700°C, and at 1000°C for 1 h to certify the effect of heat-treatment temperature on the electrical properties. The PZT fibers had elliptical cross sections with diameter of 72 μm–92 μm, and dense microstructure was obtained by heating at 1000°C. In the PZT fibers heat-treated at 1000°C, a distinguishable relative permittivity peak and a pyroelectric current peak were observed at their Curie temperature. The P-E hysteresis loops of the crystalline PZT fibers were also observed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Dielectric materials and actuators · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. S. Hirano, T. Hayashi, K. Nosaki and K. Kato, J. Am. Ceram. Soc. 72 (1989) 707.10.1111/j.1151-2916.1989.tb06204.x ↗
2. T. Yoko, K. Kamiya and K. Tanaka, J. Mater. Sci. 25 (1990) 3922.10.1007/BF00582461 ↗
3. S. I. Aoki, S. C. Choi, D. A. Payne and H. Yanagida, “Better Ceramics through Chemistry IV” (Material Research Society, Pennsylvania, 1990) p.485.
4. K. Kamiya, H. Honda, H. Nasu, Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi 98(8) (1990) 759.10.2109/jcersj.98.759 ↗
5. L. Del Olmo and M. L. Calzada, J. Non-Cryst. Solids, 121 (1990) 424.10.1016/0022-3093(90)90170-Q ↗
6. C. E. Kim, Y. I. Park and H. W. Lee, J. Mater. Sci. Lett. 16 (1997) 96.10.1023/A:1018521405929 ↗
7. J. M. Boulton, G. Teowee and D. R. Uhlmann, “Better Ceramics through Chemistry V” (Material Research Society, Pennsylvania, 1992) p.517.
8. Y. I. Park, H. W. Lee, Y. S. Choi, J. H. Lee, S. H. Kim and C. E. Kim,J. Kor. Ceram. Soc. 33(7) (1996) 755.
9. V. K. Seth and W. A. Schulze,Ferroelectrics 112 (1990) 283.10.1080/00150199008008234 ↗
10. T. R. Gururaja, D. Christoper, R. E. Newnham and W. A. Schulze,Ferroelectrics 47 (1983) 193.10.1080/00150198308227824 ↗
11. S. Katayama and M. Sekine, “Better Ceramics through Chemistry IV” (Material Research Society, Pennsylvania, 1990) p. 897.
12. U. Selvarag, A. V. Prasadarao, S. Komarneni and R. Roy,Mater. Lett. 12 (1991) 311.10.1016/0167-577X(91)90107-H ↗
13. M. Tohge, M. Tatsumisago and T. Minami, J. Non-Cryst. Solids 121 (1990) 443.10.1016/0022-3093(90)90173-J ↗
14. Y. Takahashi, H. Hayashi and Y. Ohya, Mat. Res. Soc. Symp. Proc. 271 (1992) 401.10.1557/PROC-271-401 ↗
15. D. C. Bradley, R. C. Mehrotra and D. P. Gaur, “Metal Alkoxides” (Academic Press, New York, 1978) p.226.
16. S. Sakka, “Sol-gel Technology for Thin Films, Fibers, Preforms, and Special shapes” (Noyes, Park Ridge, New York, 1988) p.130.
17. G. H. Haertling, J. Amer. Ceram. Soc. 43(12) (1964) 875.
18. K. Okazaki, “Ceramic Engineering for Dielectrics-Fourth Edition” (Gakken-sha Publishing Co. Ltd, Tokyo, 1992) p.518.
19. Idem., in “Ceramic Engineering for Dielectrics” (Gakken-sha Publishing, Tokyo, 1992) p. 200.
20. B. Jaffe, W. R. Cook, Jr. and H. Jaffe, “Piezoelectric Ceramics” (Academic Press, New York, 1971) p.87.
21. Idem., “Piezoelectric Ceramics” (Academic Press, New York, 1971) p. 169.
22. Y. Xu, “Ferroelectric Materials and Their Applications” (North-Holland, New York, 1991) p.68.
23. M. E. Lines and M. N. Glass, “Principles and Applications of Ferroelectrics and Related Materials” (Oxford University Press, Oxford, 1977) p.141.
24. K. Okazaki, “Ceramic Engineering for Dielectrics-Fourth Edition” (Gakken-sha Publishing Co. Ltd, Tokyo, 1992) p.527.