journal article·2023-01

Ab initio investigation of the structural, optoelectronic, mechanical, vibrational, and thermoelectric properties of the SixSn1−xSe alloys

Muhammad Atif Sattar, Najwa Al Bouzieh, Fayyaz Hussain, Maamar Benkraouda, Nacir Tit, Noureddine Amrane

Journal of Materials Science· Volume 58· Issue 2
Publisher page

Abstract

Single-crystal SnSe holds the world record for high thermoelectric performance. However, the efficiency of polycrystalline SnSe is limited due to high thermal conductivity (κ) and low electronic conductivity (σ) compared to single-crystal SnSe. Here, we report the low κ and high σ on SnSe with Si doping using semi-classical Boltzmann transport theory and first-principles calculations. Our calculated phonon dispersion curves and elastic constants of the SixSn1−xSe alloys (x varied from 0 to 0.25) show the thermodynamic and mechanical stability. Our density functional theory (DFT)-calculated elastic moduli of the α-SnSe match well with theoretical and experiment reports. The electronic properties are calculated using diversity of exchange-correlation functionals. The band gap for pristine α-SnSe is estimated to be 0.88 eV using the hybrid functional (HSE06), which is in excellent agreement with the experimental value 0.86 eV. The G0W0+Bethe–Salpeter Equation, which incorporates combined electron–electron (e–e) and electron–hole (e–h) interactions, is used to calculate the optical characteristics of pure and Si-alloyed α-SnSe. Our DFT-calculated Seebeck coefficient for SixSn1−xSe alloys for all Si doping concentrations revealed p-type behavior. At 770 K, for x = 0.25, SixSn1−xSe is found to have the lowest thermal conductivity of ~ 0.16 $${mathrm{Wm}}-1,{mathrm{K}}-1$$ attributed to the high lattice anharmonicity. Our results propose a novel strategy to enhance the optical and thermoelectric properties in the SnSe-based thermoelectric materials.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (72)

Show source-provided references
1. Siddique S, Gong Y, Abbas G et al (2022) Realizing high thermoelectric performance in p-Type SnSe crystals via convergence of multiple electronic valence bands. ACS Appl Mater Interfaces 14:4091–409910.1021/acsami.1c20549 ↗
2. He J, Kanatzidis MG, Dravid VP (2013) High performance bulk thermoelectrics via a panoscopic approach. Mater Today 16:166–17610.1016/j.mattod.2013.05.004 ↗
3. Lwin ML, Dharmaiah P, Min BH et al (2021) Tuning of thermoelectric transport properties via the formation of hierarchical structures in Bi-doped Gd2O3/Bi0.5Sb1.5Te3 nanocomposites. Int J Energy Res 45:20921–2093310.1002/er.7148 ↗
4. Ma Z, Wei J, Song P et al (2021) Review of experimental approaches for improving zT of thermoelectric materials. Mater Sci Semicond Process 121:10530310.1016/j.mssp.2020.105303 ↗
5. Zhu H, Xiao C, Xie Y (2018) Design of highly efficient thermoelectric materials: tailoring reciprocal-space properties by real-space modification. Adv Mater 30:180200010.1002/adma.201802000 ↗
6. Liu W, Hu J, Zhang S et al (2017) New trends strategies and opportunities in thermoelectric materials: a perspective. Mater Today Phys 1:50–6010.1016/j.mtphys.2017.06.001 ↗
7. Chang C, Zhao L-D (2018) Anharmoncity and low thermal conductivity in thermoelectrics. Mater Today Phys 4:50–5710.1016/j.mtphys.2018.02.005 ↗
8. Luo Y, Cai S, Hua X et al (2019) High thermoelectric performance in polycrystalline SnSe via dual-doping with Ag/Na and nanostructuring with Ag8SnSe6. Adv Energy Mater 9:180307210.1002/aenm.201803072 ↗
9. Zhang Q, Song Q, Wang X et al (2018) Deep defect level engineering: a strategy of optimizing the carrier concentration for high thermoelectric performance. Energy Environ Sci 11:933–94010.1039/C8EE00112J ↗
10. Chandra S, Biswas K (2019) Realization of high thermoelectric figure of merit in solution synthesized 2D SnSe nanoplates via Ge alloying. J Am Chem Soc 141:6141–614510.1021/jacs.9b01396 ↗
11. Li X, Liu J, Li S et al (2020) Synergistic band convergence and endotaxial nanostructuring: achieving ultralow lattice thermal conductivity and high figure of merit in eco-friendly SnTe. Nano Energy 67:10426110.1016/j.nanoen.2019.104261 ↗
12. Deng H, Lou X, Lu W et al (2021) High-performance eco-friendly MnTe thermoelectrics through introducing SnTe nanocrystals and manipulating band structure. Nano Energy 81:10564910.1016/j.nanoen.2020.105649 ↗
13. Tan G, Shi F, Hao S et al (2015) Codoping in SnTe: enhancement of thermoelectric performance through synergy of resonance levels and band convergence. J Am Chem Soc 137:5100–511210.1021/jacs.5b00837 ↗
14. Zhang Q, Ti Z, Zhu Y et al (2021) Achieving ultralow lattice thermal conductivity and high thermoelectric performance in GeTe alloys via introducing Cu2Te nanocrystals and resonant level doping. ACS Nano 15:19345–1935610.1021/acsnano.1c05650 ↗
15. Li S, Lou X, Zou B et al (2021) Introducing PbSe quantum dots and manipulating lattice strain contributing to high thermoelectric performance in polycrystalline SnSe. Mater Today Phys 21:10054210.1016/j.mtphys.2021.100542 ↗
16. Kim SI, Lee KH, Mun HA et al (2015) Dense dislocation arrays embedded in grain boundaries for high-performance bulk thermoelectrics. Science 348:109–11410.1126/science.aaa4166 ↗
17. Lou X, Li S, Chen X et al (2021) Lattice strain leads to high thermoelectric performance in polycrystalline SnSe. ACS Nano 15:8204–821510.1021/acsnano.1c01469 ↗
18. Biswas K, He J, Blum ID et al (2012) High-performance bulk thermoelectrics with all-scale hierarchical architectures. Nature 489:414–41810.1038/nature11439 ↗
19. Wang FQ, Zhang S, Yu J, Wang Q (2015) Thermoelectric properties of single-layered SnSe sheet. Nanoscale 7:15962–1597010.1039/C5NR03813H ↗
20. Biswas K, He J, Zhang Q et al (2011) Strained endotaxial nanostructures with high thermoelectric figure of merit. Nat Chem 3:160–16610.1038/nchem.955 ↗
21. Liu Z, Mao J, Liu T-H et al (2018) Nano-microstructural control of phonon engineering for thermoelectric energy harvesting. MRS Bull 43:181–18610.1557/mrs.2018.7 ↗
22. Zhao Q, Qin B, Wang D et al (2019) Realizing high thermoelectric performance in polycrystalline SnSe via silver doping and germanium alloying. ACS Appl Energy Mater 3:2049–205410.1021/acsaem.9b01475 ↗
23. Xiao Y, Zhao L-D (2020) Seeking new, highly effective thermoelectrics. Science 367:1196–119710.1126/science.aaz9426 ↗
24. Shi W, Gao M, Wei J et al (2018) Tin selenide (SnSe): growth, properties, and applications. Adv Sci 5:170060210.1002/advs.201700602 ↗
25. Albrecht S, Reining L, Del Sole R, Onida G (1998) Ab initio calculation of excitonic effects in the optical spectra of semiconductors. Phys Rev Lett 80:451010.1103/PhysRevLett.80.4510 ↗
26. Peng K, Zhang B, Wu H et al (2018) Ultra-high average figure of merit in synergistic band engineered SnxNa1− xSe0. 9S0. 1 single crystals. Mater Today 21:501–50710.1016/j.mattod.2017.11.005 ↗
27. Kutorasinski K, Wiendlocha B, Kaprzyk S, Tobola J (2015) Electronic structure and thermoelectric properties of n-and p-type SnSe from first-principles calculations. Phys Rev B 91:20520110.1103/PhysRevB.91.205201 ↗
28. Kang JS, Wu H, Li M, Hu Y (2019) Intrinsic low thermal conductivity and phonon renormalization due to strong anharmonicity of single-crystal tin selenide. Nano Lett 19:4941–494810.1021/acs.nanolett.9b01056 ↗
29. Zhao L-D, Lo S-H, Zhang Y et al (2014) Ultralow thermal conductivity and high thermoelectric figure of merit in SnSe crystals. Nature 508:373–37710.1038/nature13184 ↗
30. Zhao L-D, Chang C, Tan G, Kanatzidis MG (2016) SnSe: a remarkable new thermoelectric material. Energy Environ Sci 9:3044–306010.1039/C6EE01755J ↗
31. Chattopadhyay T, Pannetier J, Von Schnering HG (1986) Neutron diffraction study of the structural phase transition in SnS and SnSe. J Phys Chem Solids 47:879–88510.1016/0022-3697(86)90059-4 ↗
32. Duvjir G, Min T, Thi Ly T et al (2017) Origin of p-type characteristics in a SnSe single crystal. Appl Phys Lett 110:26210610.1063/1.4991003 ↗
33. Leng H-Q, Zhou M, Zhao J et al (2016) The thermoelectric performance of anisotropic SnSe doped with Na. RSC Adv 6:9112–911610.1039/C5RA19469E ↗
34. Guo R, Wang X, Kuang Y, Huang B (2015) First-principles study of anisotropic thermoelectric transport properties of IV-VI semiconductor compounds SnSe and SnS. Phys Rev B 92:11520210.1103/PhysRevB.92.115202 ↗
35. Peng K, Lu X, Zhan H et al (2016) Broad temperature plateau for high ZT s in heavily doped p-type SnSe single crystals. Energy Environ Sci 9:454–46010.1039/C5EE03366G ↗
36. Zhao L-D, Tan G, Hao S et al (2016) Ultrahigh power factor and thermoelectric performance in hole-doped single-crystal SnSe. Science 351:141–14410.1126/science.aad3749 ↗
37. Qin B, Wang D, He W et al (2018) Realizing high thermoelectric performance in p-type SnSe through crystal structure modification. J Am Chem Soc 141:1141–114910.1021/jacs.8b12450 ↗
38. Qin B, Zhang Y, Wang D et al (2020) Ultrahigh average ZT realized in p-type SnSe crystalline thermoelectrics through producing extrinsic vacancies. J Am Chem Soc 142:5901–590910.1021/jacs.0c01726 ↗
39. Jin M, Shi X-L, Feng T et al (2019) Super large Sn1–x Se single crystals with excellent thermoelectric performance. ACS Appl Mater Interfaces 11:8051–805910.1021/acsami.8b21699 ↗
40. Wei W, Chang C, Yang T et al (2018) Achieving high thermoelectric figure of merit in polycrystalline SnSe via introducing Sn vacancies. J Am Chem Soc 140:499–50510.1021/jacs.7b11875 ↗
41. Pauling L (1932) The nature of the chemical bond. IV. The energy of single bonds and the relative electronegativity of atoms. J Am Chem Soc 54:3570–358210.1021/ja01348a011 ↗
42. Sun J, Yu J, Guo Y, Wang Q (2020) Enhancing power factor of SnSe sheet with grain boundary by doping germanium or silicon. npj Comput Mater 6:1–610.1038/s41524-020-00368-6 ↗
43. Wei T-R, Tan G, Zhang X et al (2016) Distinct impact of alkali-ion doping on electrical transport properties of thermoelectric p-type polycrystalline SnSe. J Am Chem Soc 138:8875–888210.1021/jacs.6b04181 ↗
44. Chen C-L, Wang H, Chen Y-Y et al (2014) Thermoelectric properties of p-type polycrystalline SnSe doped with Ag. J Mater Chem A 2:11171–1117610.1039/C4TA01643B ↗
45. Blöchl PE, Jepsen O, Andersen OK (1994) Improved tetrahedron method for Brillouin-zone integrations. Phys Rev B 49:1622310.1103/PhysRevB.49.16223 ↗
46. Kresse G, Hafner J (1993) Ab initio molecular dynamics for liquid metals. Phys Rev B 47:55810.1103/PhysRevB.47.558 ↗
47. Kresse G, Hafner J (1994) Ab initio molecular-dynamics simulation of the liquid-metal–amorphous-semiconductor transition in germanium. Phys Rev B 49:1425110.1103/PhysRevB.49.14251 ↗
48. Perdew JP, Burke K, Ernzerhof M (1996) Generalized gradient approximation made simple. Phys Rev Lett 77:386510.1103/PhysRevLett.77.3865 ↗
49. Tran F, Blaha P (2009) Accurate band gaps of semiconductors and insulators with a semilocal exchange-correlation potential. Phys Rev Lett 102:22640110.1103/PhysRevLett.102.226401 ↗
50. Krukau AV, Vydrov OA, Izmaylov AF, Scuseria GE (2006) Influence of the exchange screening parameter on the performance of screened hybrid functionals. J Chem Phys 125:22410610.1063/1.2404663 ↗
51. Madsen GKH, Carrete J, Verstraete MJ (2018) BoltzTraP2, a program for interpolating band structures and calculating semi-classical transport coefficients. Comput Phys Commun 231:140–14510.1016/j.cpc.2018.05.010 ↗
52. Hedin L (1965) New method for calculating the one-particle Green’s function with application to the electron-gas problem. Phys Rev 139:A79610.1103/PhysRev.139.A796 ↗
53. Rohlfing M, Louie SG (1998) Electron-hole excitations in semiconductors and insulators. Phys Rev Lett 81:231210.1103/PhysRevLett.81.2312 ↗
54. Karunarathne A, Gladden JR, Priyadarshan G et al (2018) Room temperature resonant ultrasound spectroscopy of single crystalline SnSe. ACS Appl Energy Mater 1:6123–612810.1021/acsaem.8b01129 ↗
55. Sattar MA, Benkraouda M, Amrane N (2022) First-principles study on the structural, electronic, vibrational, and optical properties of the Ru-doped SnSe. Phys B 633:41378910.1016/j.physb.2022.413789 ↗
56. Kim HS, Choi G, Ha MY et al (2019) Thermoelectric transport properties of Pb doped SnSe alloys (PbxSn1-xSe): DFT-BTE simulations. J Solid State Chem 270:413–41810.1016/j.jssc.2018.12.003 ↗
57. Csonka GI, Perdew JP, Ruzsinszky A et al (2009) Assessing the performance of recent density functionals for bulk solids. Phys Rev B 79:15510710.1103/PhysRevB.79.155107 ↗
58. Carrete J, Mingo N, Curtarolo S (2014) Low thermal conductivity and triaxial phononic anisotropy of SnSe. Appl Phys Lett 105:10190710.1063/1.4895770 ↗
59. González-Romero RL, Antonelli A, Meléndez JJ (2017) Insights into the thermoelectric properties of SnSe from ab initio calculations. Phys Chem Chem Phys 19:12804–1281510.1039/C7CP01160A ↗
60. Sham LJ, Schlüter M (1985) Density-functional theory of the band gap. Phys Rev B 32:388310.1103/PhysRevB.32.3883 ↗
61. Yang J, Zhang G, Yang G et al (2015) Outstanding thermoelectric performances for both p-and n-type SnSe from first-principles study. J Alloy Compd 644:615–62010.1016/j.jallcom.2015.04.175 ↗
62. Ma J, Chen Y, Li W (2018) Intrinsic phonon-limited charge carrier mobilities in thermoelectric SnSe. Phys Rev B 97:20520710.1103/PhysRevB.97.205207 ↗
63. Lee YK, Ahn K, Cha J et al (2017) Enhancing p-type thermoelectric performances of polycrystalline SnSe via tuning phase transition temperature. J Am Chem Soc 139:10887–1089610.1021/jacs.7b05881 ↗
64. Escudero D, Duchemin I, Blase X, Jacquemin D (2017) Modeling the photochrome–TiO2 interface with Bethe-Salpeter and time-dependent density functional theory methods. J Phys Chem Lett 8:936–94010.1021/acs.jpclett.7b00015 ↗
65. Körbel S, Kammerlander D, Sarmiento-Pérez R et al (2015) Optical properties of Cu-chalcogenide photovoltaic absorbers from self-consistent G W and the Bethe-Salpeter equation. Phys Rev B 91:07513410.1103/PhysRevB.91.075134 ↗
66. Born M, Huang K, Lax M (1955) Dynamical theory of crystal lattices. Am J Phys 23:474–47410.1119/1.1934059 ↗
67. Li G, Aydemir U, Wood M et al (2017) Ideal strength and deformation mechanism in high-efficiency thermoelectric SnSe. Chem Mater 29:2382–238910.1021/acs.chemmater.7b00279 ↗
68. Wu Z, Zhao E, Xiang H et al (2007) Crystal structures and elastic properties of superhard Ir N2 and Ir N3 from first principles. Phys Rev B 76:05411510.1103/PhysRevB.76.054115 ↗
69. Hill R (1952) The elastic behaviour of a crystalline aggregate. Proc Phys Soc Sect A 65:34910.1088/0370-1298/65/5/307 ↗
70. Xiao Y, Chang C, Pei Y et al (2016) Origin of low thermal conductivity in SnSe. Phys Rev B 94:12520310.1103/PhysRevB.94.125203 ↗
71. Sattar MA, Javed M, Benkraouda M, Amrane N (2021) The structural stability, lattice dynamics, electronic, thermophysical, and mechanical properties of the inverse perovskites A3OX: a comparative first-principles study. Int J Energy Res 45:4793–481010.1002/er.6098 ↗
72. Shi X, Zheng K, Hong M et al (2018) Boosting the thermoelectric performance of p-type heavily Cu-doped polycrystalline SnSe via inducing intensive crystal imperfections and defect phonon scattering. Chem Sci 9:7376–738910.1039/C8SC02397B ↗