Process window for growth of polar-axis-oriented tetragonal (Bi, K)TiO3 epitaxial films on (100)cSrRuO3//(100)SrTiO3 substrates by the hydrothermal method
Source abstract
Abstract
(Bi, K)TiO3 is a lead-free ferroelectric material that has large tetragonality at room temperature. High-quality films of (Bi, K)TiO3 have been difficult to grow due to the high volatilities of the constituent Bi and K. Epitaxial tetragonal (Bi, K)TiO3 films with large remanent polarization of about 84 µC/cm2 were grown on (100)cSrRuO3//(100)SrTiO3 substrates by the hydrothermal method. In this study, we systematically investigated the effects of the input amounts of the starting materials on the compositions, crystal structures, and ferroelectric properties of films grown on (100)cSrRuO3//(100)SrTiO3 substrates. As a resultant, (001)-oriented (Bi, K)TiO3 single-phase films were obtained with input Bi/(Bi + Ti) ratios of 0.056–0.450 at a KOH concentration of 10.0 mol/L. This indicates an approximately one-order-wide process window of the input Bi/(Bi + Ti) source ratio for (001)-oriented (Bi, K)TiO3 single-phase films. On the other hand, these films were also obtained at KOH concentrations of 8.0 – 13.5 mol/L and with a fixed input Bi/(Bi + Ti) source ratio of 0.22. This suggests the high reproducibility of (001)-oriented (Bi, K)TiO3 films even with fluctuations in the input source amount. In addition, all films deposited within this KOH concentration range showed large remanent polarization of about 84 µC/cm2. Moreover, good insulation characteristics were achieved for the films deposited at higher KOH concentrations of 10.0 to 13.5 mol/L.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Electronic and Structural Properties of Oxides · Multiferroics and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Hoffmann M, Pešić M, Chatterjee K et al (2016) Direct observation of negative capacitance in polycrystalline ferroelectric HfO2. Adv Funct Mater 26:8643–8649. https://doi.org/10.1002/adfm.20160286910.1002/adfm.201602869 ↗
2. Balakrishna AR, Huber JE, Landis CM (2014) Nano-actuator concepts based on ferroelectric switching. Smart Mater Struct 23:085016-1–85018. https://doi.org/10.1088/0964-1726/23/8/08501610.1088/0964-1726/23/8/085016 ↗
3. Yang SY, Seidel J, Byrnes SJ et al (2010) Above-bandgap voltages from ferroelectric photovoltaic devices. Nat Nanotechnol 5:143–147. https://doi.org/10.1038/nnano.2009.45110.1038/nnano.2009.451 ↗
4. Takenaka T, Nagata H (2005) Current status and prospects of lead-free piezoelectric ceramics. J Eur Ceram Soc 25:2693–2700. https://doi.org/10.1016/j.jeurceramsoc.2005.03.12510.1016/j.jeurceramsoc.2005.03.125 ↗
5. Panda PK (2009) Review: environmental friendly lead-free piezoelectric materials. J Mater Sci 44:5049–5062. https://doi.org/10.1007/s10853-009-3643-010.1007/s10853-009-3643-0 ↗
6. Takenaka T, Member S, Nagata H, Hiruma Y (2009) Phase Transition Temperatures and. IEEE Trans Ultrason Ferroelectr Freq Control 56:1595–161210.1109/TUFFC.2009.1224 ↗
7. Zhang YR, Li JF, Zhang BP, Peng CE (2008) Piezoelectric and ferroelectric properties of Bi-compensated (Bi1/2Na1/2) TiO3 – (Bi1/2K1/2)TiO3 lead-free piezoelectric ceramics. J Appl Phys 103:074109-1–74116. https://doi.org/10.1063/1.290280510.1063/1.2902805 ↗
8. Rao PVB, Ramana EV, Sankaram TB (2009) Electrical properties of K0.5Bi0.5TiO3. J Alloys Compd 467:293–298. https://doi.org/10.1016/j.jallcom.2007.11.08910.1016/j.jallcom.2007.11.089 ↗
9. Zhang S, Xia R, Shrout TR (2007) Lead-free piezoelectric ceramics vs. PZT? J Electroceramics 19:251–257. https://doi.org/10.1007/s10832-007-9056-z10.1007/s10832-007-9056-z ↗
10. Huang X, Yang Z, Sun L et al (2009) Synthesis and characterization of potassium bismuth titanate inverse opal photonic crystals by sol-gel technique. Mater Chem Phys 114:23–25. https://doi.org/10.1016/j.matchemphys.2008.09.07410.1016/j.matchemphys.2008.09.074 ↗
11. Hou Y, Zhu M, Hou L et al (2005) Synthesis and characterization of lead-free K0.5Bi0.5TiO3 ferroelectrics by sol-gel technique. J Cryst Growth 273:500–503. https://doi.org/10.1016/j.jcrysgro.2004.09.05510.1016/j.jcrysgro.2004.09.055 ↗
12. Jing X, Huang B, Zhang X et al (2009) Structural and electrical properties of K0.5Bi0.5TiO3 thin films for ferroelectric field effect transistor applications. J Phys D Appl Phys 42:045421-1–45425. https://doi.org/10.1088/0022-3727/42/4/04542110.1088/0022-3727/42/4/045421 ↗
13. Yang CH, Wang Z, Xu HY et al (2004) Preparation and main characteristics of lead-free K0.5Bi0.5TiO3 ferroelectric thin films. J Cryst Growth 262:304–307. https://doi.org/10.1016/j.jcrysgro.2003.10.02710.1016/j.jcrysgro.2003.10.027 ↗
14. Suchanicz J, Mercurio JP, Said S (2003) Axial pressure effect on dielectric and ferroelectric properties of K0.5Bi0.5TiO3 ceramic. Ferroelectrics 290:169–175. https://doi.org/10.1080/0015019039022241110.1080/00150190390222411 ↗
15. Nemoto Y, Ichinose D, Shimizu T et al (2016) Growth of epitaxial tetragonal (Bi, K)TiO3 films and their ferroelectric and piezoelectric properties. Jpn J Appl Phys. https://doi.org/10.7567/JJAP.55.10TA1310.7567/JJAP.55.10TA13 ↗
16. König J, Suvorov D (2015) Evolution of the electrical properties of K0.5Bi0.5TiO3 as a result of prolonged sintering. J Eur Ceram Soc 35:2791–2799. https://doi.org/10.1016/j.jeurceramsoc.2015.04.00310.1016/j.jeurceramsoc.2015.04.003 ↗
17. Zaremba T (2003) Application of thermal analysis to study of the synthesis of K 0.5Bi0.5TiO3 ferroelectric. J Therm Anal Calorim 74:653–658. https://doi.org/10.1023/B:JTAN.0000005207.02876.b310.1023/B:JTAN.0000005207.02876.b3 ↗
18. Czaja P, Suchanicz J, Bochenek D et al (2018) High-density lead-free K0.5Bi0.5TiO3 ceramics: preparation, mechanical and dielectric properties. Phase Transit 91:1051–1059. https://doi.org/10.1080/01411594.2018.150997410.1080/01411594.2018.1509974 ↗
19. Ito Y, Tateyama A, Kubota R et al (2022) (2022) Polar-axis-oriented epitaxial tetragonal (Bi, K)TiO3 films with large remanent polarization deposited below curie temperature by a hydrothermal method. Appl Phys Lett 120:022903. https://doi.org/10.1063/5.007501410.1063/5.0075014 ↗
20. Kubota R, Tetayama A, Ito Y et al (2022) Film thickness dependence of ferroelectric properties in polar-axis-oriented epitaxial tetragonal (Bi, K)TiO3 films prepared by hydrothermal method. AIP Adv 12:0.521-1–7. https://doi.org/10.1063/5.008417010.1063/5.0084170 ↗
21. Krad I, Bidault O, Geoffroy N, El MM (2016) Preparation and characterization of K0.5Bi0.5TiO3 particles synthesized by a stirring hydrothermal method. Ceram Int 42:3751–3756. https://doi.org/10.1016/j.ceramint.2015.10.15810.1016/j.ceramint.2015.10.158 ↗
22. Zhang Y, Zheng X, Zhang T et al (2010) Humidity sensing properties of the sensor based on Bi0.5K0.5TiO3 powder. Sensors Actuators, B Chem 147:180–184. https://doi.org/10.1016/j.snb.2010.03.04510.1016/j.snb.2010.03.045 ↗
23. Li F, Wu S, Li T et al (2020) Normal-relaxor ferroelectric phase transition induced morphotropic phase boundary accompanied by enhanced piezoelectric and electrostrain properties in strontium modulated Bi0.5K0.5TiO3 lead-free ceramics. J Eur Ceram Soc 40:3918–3927. https://doi.org/10.1016/j.jeurceramsoc.2020.05.03010.1016/j.jeurceramsoc.2020.05.030 ↗
24. Li ZF, Wang CL, Zhong WL et al (2003) Dielectric relaxor properties of K0.5Bi0.5TiO3 ferroelectrics prepared by sol-gel method. J Appl Phys 94:2548–2552. https://doi.org/10.1063/1.159229010.1063/1.1592290 ↗
25. Lencka MM, Oledzka M, Riman RE (2000) Hydrothermal synthesis of sodium and potassium bismuth titanates hydrothermal synthesis of sodium and potassium. Chem Mater 12:1323–133010.1021/cm9906654 ↗
26. Foster CM, Bai GR, Csencsits R et al (1997) Single-crystal Pb(ZrxTi1-x)O3 thin films prepared by metal-organic chemical vapor deposition: systematic compositional variation of electronic and optical properties. J Appl Phys 81:2349–2357. https://doi.org/10.1063/1.36423910.1063/1.364239 ↗
27. Funakubo H, Imashita K et al (1994) Deposition condition of epitaxially grown PZT films by CVD. J Ceram Soc Jpn 102:795–798. https://doi.org/10.2109/jcersj.102.79510.2109/jcersj.102.795 ↗
28. Okada M, Tominaga K, Araki T et al (1990) Metalorganic chemical vapor deposition of c-axis oriented pzt thin films. Jpn J Appl Phys 29:718–722. https://doi.org/10.1143/JJAP.29.71810.1143/JJAP.29.718 ↗
29. Ohno T, Fukumitsu K, Honda T et al (2016) Orientation control of SrRuO3 thin film on a Si substrate by chemical solution deposition for an electrode of lead zirconate titanate thin films. Mater Lett 181:74–77. https://doi.org/10.1016/j.matlet.2016.06.02310.1016/j.matlet.2016.06.023 ↗
30. Li T, Wang G, Li K et al (2014) Electrical properties of lead-free KNN films on SRO/STO by RF magnetron sputtering. Ceram Int 40:1195–1198. https://doi.org/10.1016/j.ceramint.2013.07.00510.1016/j.ceramint.2013.07.005 ↗
31. Morita T (2010) Piezoelectric materials synthesized by the hydrothermal method and their applications. Mater (Basel) 3:5236–5245. https://doi.org/10.3390/ma312523610.3390/ma3125236 ↗
32. Tateyama A, Ito Y, Nakamura Y, Shimizu T, Orino Y, Kurosawa MM, Uchida H, Shiraishi T, Kiguchi T, Konno TJ, Kumada N, Funakubo H (2019) Effect of starting materials on the deposition behaviour of hydrothermally synthesized {100}c-oriented epitaxial (K, Na)NbO3 thick films and their ferroelectric and piezoelectricproperties. J Crys Growth 511:1–7. https://doi.org/10.1016/j.jcrysgro.2019.01.01910.1016/j.jcrysgro.2019.01.019 ↗
33. Ito Y, Tateyama A, Nakamura Y, Shimizu T, Kurosawa M, Uchida H, Shiraishi T, Kiguchi T (2020) High yield preparation of (100)c-oriented (K, Na)NbO3 thick films by hydrothermal method using amorphous niobium source. J Ceram Soc Jpn 8:512–517. https://doi.org/10.2109/jcersj2.2002310.2109/jcersj2.20023 ↗
34. Shiraishi T, Muto Y, Ito Y et al (2020) Structural and electrical characterization of hydrothermally deposited piezoelectric ( K, Na)( Nb, Ta)O3 thick films. J Mater Sci 55:8829–8842. https://doi.org/10.1007/s10853-020-04663-x10.1007/s10853-020-04663-x ↗
35. Piskin C, Karacasulu L, Bortolotti M, Vakifahmetoglu C (2021) Synthesis of potassium–sodium niobate (KNN) from NbO2. Open Ceram 7:100159-1–100165. https://doi.org/10.1016/j.oceram.2021.10015910.1016/j.oceram.2021.100159 ↗
36. López-Juárez R, Castañeda-Guzmán R, Villafuerte-Castrejón ME (2014) Fast synthesis of NaNbO3 and K0.5Na0.5NbO3 by microwave hydrothermal method. Ceram Int 40:14757–14764. https://doi.org/10.1016/j.ceramint.2014.06.06510.1016/j.ceramint.2014.06.065 ↗
37. Jardiel T, Caballero A, C and Villegas. M, (2008) Aurivillius ceramics: Bi4Ti3O12-based piezoelectrics. J Ceram Soc Jpn 116:511–518. https://doi.org/10.2109/jcersj2.116.51110.2109/jcersj2.116.511 ↗
38. Watanabe T, Funakubo H (2006) Controlled crystal growth of layered-perovskite thin films as an approach to study their basic properties. J Appl Phys 100:051602-1–51611. https://doi.org/10.1063/1.233735710.1063/1.2337357 ↗
39. Hervoches CH, Snedden A, Riggs R et al (2002) Structural behavior of the four-layer aurivillius-phase ferroelectrics SrBi4Ti4O15 and Bi5Ti3FeO15. J Solid State Chem 164:280–291. https://doi.org/10.1006/jssc.2001.947310.1006/jssc.2001.9473 ↗
40. Ismunandar KT, Hoshikawa A et al (2004) Structural studies of five layer aurivillius oxides: A2Bi4Ti5O18 (A=Ca, Sr, Ba and Pb). J Solid State Chem 177:4188–4196. https://doi.org/10.1016/j.jssc.2004.07.03210.1016/j.jssc.2004.07.032 ↗
41. Kennedy BJ, Zhou Q, Ismunandar, et al (2008) Cation disorder and phase transitions in the four-layer ferroelectric aurivillius phases Abi4Ti4O15 (A=Ca, Sr, Ba, Pb). J Solid State Chem 181:1377–1386. https://doi.org/10.1016/j.jssc.2008.02.01510.1016/j.jssc.2008.02.015 ↗
42. Fang W, Zhao H, Jia T et al (2021) Effects of La and Ni doping on ferroelectric and photocatalytic properties of aurivillius Bi7Ti3Fe3O21. Solid State Electron 186:108170. https://doi.org/10.1016/j.sse.2021.10817010.1016/j.sse.2021.108170 ↗
43. Tellier J, Boullay P, Ben Jennet D, Mercurio D (2008) Structural evolution in three and four-layer aurivillius solid solutions: a comparative study versus relaxor properties. Solid State Sci 10:177–185. https://doi.org/10.1016/j.solidstatesciences.2007.09.01010.1016/j.solidstatesciences.2007.09.010 ↗
44. Noguchi Y, Suzuki M, Kitanaka Y et al (2008) Ferroelectric polarization and piezoelectric properties of layer-structured K0.5Bi4.5Ti4O15 single crystals. Appl Phys Lett 93:032904-1–32913. https://doi.org/10.1063/1.295639710.1063/1.2956397 ↗
45. Wang CM, Wang JF (2008) Aurivillius phase potassium bismuth titanate: K0.5Bi4.5Ti4O15. J Am Ceram Soc 91:918–923. https://doi.org/10.1111/j.1551-2916.2007.02211.x10.1111/j.1551-2916.2007.02211.x ↗
46. Kay MI, Newnham RE, Smith DK (1972) Crystal structure of Bi4Ti3O12. Ferroelectrics 3:17–27. https://doi.org/10.1080/0015019710823768010.1080/00150197108237680 ↗
47. Yang J, Tong W, Liu Z et al (2012) Structural, magnetic, and EPR studies of the aurivillius phase Bi6Fe2Ti3O18 and Bi6FeCrTi3O18. Phys Rev B Condens Matter Mater Phys 86:1–7. https://doi.org/10.1103/PhysRevB.86.10441010.1103/PhysRevB.86.104410 ↗
48. Li J, Huang R, Peng C et al (2020) Low temperature synthesis of plate-like Na0.5Bi0.5TiO3 via molten salt method. Ceram Int 46:19752–19757. https://doi.org/10.1016/j.ceramint.2020.04.29910.1016/j.ceramint.2020.04.299 ↗
49. Zhao W, Zhou H, Yan Y, Liu D (2008) Topochemical synthesis of plate-like Na0.5Bi0.5TiO3 from aurivillius precursor. J Am Ceram Soc 91:1322–1325. https://doi.org/10.1111/j.1551-2916.2007.02250.x10.1111/j.1551-2916.2007.02250.x ↗