Fabrication of conductive SrRuO3 thin film and Ba0.60Sr0.40TiO3/SrRuO3 bilayer films on MgO substrate
Source abstract
Abstract
Conductive SrRuO3 (SRO) thin films have been grown on (100) MgO substrates by pulsed laser deposition (PLD) technique. Effects of oxygen pressure and deposition temperature on the orientation of SRO thin film were investigated. X-ray diffraction (XRD) θ/2θ patterns and the temperature dependent resistivity measurements indicated that oxygen pressure of 30 Pa and deposition temperature of 700 °C were the optimized deposition parameters. A parallel-plate capacitor structure was prepared with the SRO films deposited under optimized condition as an electrode layer and Ba0.60Sr0.40TiO3 (BST) thin film as the dielectric layer. XRD Φ scans indicated a \( {\text{[001]BST//[110/001]SRO//[001]MgO}} \) epitaxial relationship between BST and SRO on MgO substrate. The dielectric constant and loss tangent measured at 10 kHz and 300 K was 427 and 0.099 under 0 V bias, and 215 and 0.062 under 8 V bias, respectively. A tunability of 49.6% has been achieved with DC bias as low as 8 V. The C–V hysteresis curve and the P–E hysteresis loop suggested that the BST films epitaxially grown on SRO/MgO have ferroelectricity at room temperature. The induced ferroelectricity was believed to originate from the compressive strain between the epitaxial BST and SRO thin films. These results show the potential application of the BST/SRO heterostructures in microelectronic devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials · Advanced Condensed Matter Physics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Chen CL, Cao Y, Huang ZJ, Jiang QD, Zhang Z, Sun YY, Kang WN (1997) Appl Phys Lett 71(8):104710.1063/1.119723 ↗
2. Jia QX, Foltyn SR, Hawley M, Wu XD (1997) J Vac Sci Technol A 15(3):108010.1116/1.580433 ↗
3. Singh SK, Lees MR, Singh RK, Palmer SB (2002) J Phys D: Appl Phys 35:2243–224610.1088/0022-3727/35/18/302 ↗
4. Jiang JC, Tian W, Pan XQ (1998) Appl Phys Lett 72:296310.1063/1.121508 ↗
5. Fang X, Kobayashi T (2001) J Appl Phys 90:16210.1063/1.1319323 ↗
6. Gausepohl SC, Lee M, Rao RA, Eom CB (1996) Phys Rev B 54:899610.1103/PhysRevB.54.8996 ↗
7. Vasco E, Dittmann R, Karthaüser S, Waser R (2003) Appl Phys Lett 82:249710.1063/1.1566798 ↗
8. Herranz G, Sánchez F, Fontcuberta J (2005) Phys Rev B 71:17441110.1103/PhysRevB.71.174411 ↗
9. Syamaprasad U, Galgali RK, Mohanty BC (1989) Mater Lett 8:3610.1016/0167-577X(89)90092-X ↗
10. Yang G, Gu HS, Zhu J, Wang YQ (2002) J Crystal Growth 242:172
11. Zhu XH et al (2004) J Cryst Growth 268:19210.1016/j.jcrysgro.2004.04.112 ↗
12. Singh SK, Lees MR, Singh RK, Palmer SB (2002) J Phys D: Appl Phys 35:224310.1088/0022-3727/35/18/302 ↗
13. Jiang JC, Pan XQ (2001) J Appl Phys 89:636510.1063/1.1368160 ↗
14. Kennedy RJ, Madden R, Stampe PA (2001) J Phys D: Appl Phys 34:185310.1088/0022-3727/34/12/314 ↗
15. Abe K, Komatsu S (1995) J Appl Phys 77:646110.1063/1.359120 ↗
16. Sinnamon LJ, Bowman RM, Gregg JM (2002) Appl Phys Lett 81:88910.1063/1.1496144 ↗
17. Yoon S-G, Lee J-C, Safari A (1994) J Appl Phys 76:299910.1063/1.357547 ↗