journal article·2007-04

Characterization of Ba0.9Sr0.1TiO3 prepared by low temperature chloride aqueous synthesis

Srimala Sreekantan, Ahmad Fauzi Mohd Noor, Zainal Arifin Ahmad, Radzali Othman, Anthony West, Derek Sinclair

Journal of Materials Science· Volume 42· Issue 7
Publisher page

Abstract

Ba0.9Sr0.1TiO3 powder was processed at 80°C by reacting Ti sol in aqueous solutions that contained BaCl2, SrCl2 and NaOH at atmospheric pressure. Well-crystallized, spherical, nanosizes powders were formed by this method. The powders were found to have a cubic structure, which was retained even after heating at 900°C. Sintering at 1400°C, led to the formation of a tetragonal structure with a secondary phase of Ba6Ti17O40. Abrupt grain growth was observed at 1400°C. The electrical response of the sample sintered at 1400°C has three electrically different regions. Each region of the sample is represented by different RC element. Element 1 (R 1 C 1) is the most resistive and its capacitance ishigh (0.5 nFcm−1) indicating a thin region, probably the grain boundary. Element 2 (R 2 C 2) shows a smaller resistance value compared to element 1. The capacitance value of element 2 is temperature-dependent and displays a Curie–Weiss behaviour, indicative of a ferroelectric material above T c. The lower capacitance of C 2 (15 pFcm−1) indicates that it is a much thicker region than element 1 and can be assigned as a ferroelectric bulk region. Element 3 is probably an electrode effect.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Multiferroics and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Haertling GH (1999) J Am Ceram Soc 82:79710.1111/j.1151-2916.1999.tb01840.x ↗
2. Sengupta LC, Ngo E, O’Day ME, Laccto R (1995) Proc. 1994 IEEE 13th Int. Symp. 622
3. Zhang T, Ni H (2002) Sensor Actuator A 100:25210.1016/S0924-4247(02)00139-5 ↗
4. Whatmore RW (1991) Ferroelectrics 118:24110.1080/00150199108014764 ↗
5. Khan M, Burks DP, Burn I, Schulze WA (1988) In: Levinson LM (ed) Electronic ceramics. Marcel Dekker, New York, p. 191
6. Qutzourhit A, Trefny JU, Kito T, Yarar B, Naziripour A, Hermann AM (1995) Thin Solid Films 259:21810.1016/0040-6090(94)06451-2 ↗
7. Dietz GW, Schumacher M, Waser R, Streiffer SK, Basceri C, Kingon AI (1997) J Appl Phys 82:235910.1063/1.366045 ↗
8. Jeon JH, Hahn YD, Kim HD (2001) J Euro Ceram Soc 21:165310.1016/S0955-2219(01)00085-1 ↗
9. Komarneni S, Li QH, Stefansson KM, Roy R (1993) J Mater Res 8:317610.1557/JMR.1993.3176 ↗
10. Gallagher PK, Schrey F, DiMarcello FV (1963) J Am Ceram Soc 46:350
11. Schrey F (1965) J Am Ceram Soc 48:40110.1111/j.1151-2916.1965.tb14776.x ↗
12. Selvam IP, Kumar V (2002) Mater Lett 56:108910.1016/S0167-577X(02)00684-5 ↗
13. Thakur OP, Prakash C, Agrawal DK (2002) Mater Lett 56:97010.1016/S0167-577X(02)00648-1 ↗
14. Roeder RK, Slamovich EB (1999) J Am Ceram Soc 82:166510.1111/j.1151-2916.1999.tb01984.x ↗
15. Khollam YB, Bhoraskar SV, Deshpande SB, Potdar HS, Pavaskar NR, Sainkar SR, Date SK (2003) Mater Lett 57:187110.1016/S0167-577X(02)01091-1 ↗
16. Urban JJ, Yun WS, Gu Q, Park HK (2002) J Am Chem Soc 124:118610.1021/ja017694b ↗
17. O’Brien S, Brus L, Murray CB (2001) J Am Chem Soc 123:1208510.1021/ja011414a ↗
18. Hernandez BA, Chang KS, Fisher ER, Dorhout PK (2002) Chem Mater 14:48010.1021/cm010998c ↗
19. Perez-Maqueda LA, Dianez MJ, Gotor FJ, Sayagues MJ, Real C, Criado JM (2003) J Mater Chem 13:223410.1039/B305828J ↗
20. Urban JJ, Spanier JE, Ouyang L, Yun WS, Park HK (2003) Adv Mater 15:42310.1002/adma.200390098 ↗
21. Wada S, Tsurumi T, Chikamori H, Noma T, Suzuki T (2001) J Crystal Growth 229:43310.1016/S0022-0248(01)01198-8 ↗
22. Gherardi P, Matijevic E (1988) Colloids Surf 32:25710.1016/0166-6622(88)80021-0 ↗
23. Cho JH, Kuwabara M (2004) J Euro Ceram Soc 24:295910.1016/j.jeurceramsoc.2003.10.043 ↗
24. Irvine JTS, Sinclair DC, West AR (1990) Adv Mater 2:13210.1002/adma.19900020304 ↗
25. Sinclair DC, Finlay DM, West AR (2000) Int Ceram 2:33
26. Sinclair DC, West AR (1989) J Appl Phys 66:385010.1063/1.344049 ↗
27. Srimala S., Ahmad Fauzi MN, Zainal Arifin A, Radzali O (2004) JIMM 5:33
28. Xia CT, Shi EW, Zhong WZ, Guo JK (1995) J Euro Ceram Soc 15:117110.1016/0955-2219(95)00101-8 ↗
29. Moon J, Suvaci E, Li T, Costantino SA, Adair JH (2002) J Euro Ceram Soc 22:80910.1016/S0955-2219(01)00391-0 ↗
30. Testino A, Buscaglia MT, Viviani M, Buscaglia V, Nanni P (2004) J Am Ceram Soc 87:7910.1111/j.1551-2916.2004.00079.x ↗
31. Lee SB, Sigle W, Ruhle M (2002) Acta Mater 50:215110.1016/S1359-6454(02)00059-9 ↗
32. Henning DFK, Janssen R, Reynen PJL (1987) J Am Ceram Soc 70:2310.1111/j.1151-2916.1987.tb04847.x ↗
33. Rios PR, Yamamoto T, Kondo T, Sakuma T (1998) Acta Mater 46:161710.1016/S1359-6454(97)00340-6 ↗
34. Lee BK, Chung SY, Kang SJL (2000) J Am Ceram Soc 83:285810.1111/j.1151-2916.2000.tb01645.x ↗
35. Morrison FD, Sinclair DC, Skakle JMS, West AR (1998) J Am Ceram Soc 81:195710.1111/j.1151-2916.1998.tb02575.x ↗
36. West AR (1984) Solid state chemistry and applications. John Wiley & Sons, Chichester, p. 281