Effects of alkyl side chain and electron-withdrawing group on benzo[1,2,5]thiadiazole–thiophene-based small molecules in organic photovoltaic cells
Source abstract
Abstract
A series of D–A–D type small molecules containing thiophene and benzo[1,2,5]thiadiazole (BT) as electron-donating and electron-accepting units, respectively, were synthesized using palladium-catalyzed Suzuki coupling reactions. The electron-accepting units of BT were modified with pyridyl nitrogen, a single fluorine atom, or two fluorine atoms to enhance their electron-withdrawing abilities, which resulted in DH5TPys, F-DH5TBs, or 2F-DH5TBs, respectively. The solubilizing hexyl groups were introduced at two different β-positions (3- and 4-positions) on both ends of the thiophene rings. The optical, electrochemical, and photovoltaic properties of the small molecules varied, depending on the introduction of the electron-withdrawing substituents as well as the alkyl variation. The highest occupied molecular orbital (HOMO) energy levels of the small molecules were decreased by the increasing number of fluorine substituents; 4-substitution resulted in deeper HOMO energy levels than 3-substitution. 2F-DH5TB-4 had the lowest HOMO energy level of −5.49 eV. In the organic photovoltaic cells with the configuration ITO/PEDOT:PSS/small molecule:PC71BM/LiF/Al, 2F-DH5TB-4 showed the highest power conversion efficiency (PCE) of 1.11 % owing to the lowest HOMO levels and thus increased the open-circuit voltage. However, two DH5TPys showed low PCEs of 0.20 % despite the deep HOMO energy levels and good UV absorption because of the protonation of pyridyl nitrogen with acidic PEDOT:PSS. In the inverted structure of ITO/ZnO/small molecule:PC71BM/MoO3/Ag, both DH5TPys showed improved PCE values of up to 1.16 %. The device performance of 2F-DH5TB-4 also improved in the inverted structure, showing the PCE of 1.27 %.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Mi D, Kim JH, Kim HU, Xu F, Hwang DH (2014) Fullerene derivatives as electron acceptors for organic photovoltaic cells. J Nanosci Nanotechnol 14:1064–108410.1166/jnn.2014.9007 ↗
2. Bundgaard E, Krebs FC (2007) Low band gap polymers for organic photovoltaics. Sol Energ Mater Sol C 91:954–98510.1016/j.solmat.2007.01.015 ↗
3. Scaria R, Ali F, Dhawan SK, Chand S (2015) Synthesis and characterization of low band gap random copolymers based on cyclopentadithiophene and thiophene carboxylates for photovoltaic applications. J Mater Sci 50:555–562. doi: 10.1007/s10853-014-8611-710.1007/s10853-014-8611-7 ↗
4. Lee J, Kim M, Kang B, Jo SB, Kim HG, Shin J, Cho K (2014) Side-chain engineering for fine-tuning of energy levels and nanoscale morphology in polymer solar cells. Adv Energy Mater 4:140008710.1002/aenm.201400087 ↗
5. Singh RP, Kushwaha OS (2013) Polymer solar cells: an overview. Macromol Symp 327:128–14910.1002/masy.201350516 ↗
6. Zou Y, Guan Z, Zhang Z, Huang Y, Wang N, Lu Z, Jiang Q, Yu J, Liu Y, Pu X (2012) Synthesis and photovoltaic properties of conjugated copolymers bearing planar acenaphtho[1,2-b]quinoxaline moiety with deep HOMO level. J Mater Sci 47:5535–5545. doi: 10.1007/s10853-012-6446-710.1007/s10853-012-6446-7 ↗
7. Sharenko A, Gehrig D, Laquai F, Nguyen TQ (2014) The effect of solvent additive on the charge generation and photovoltaic performance of a solution-processed small molecule:perylenediimide bulk heterojunction solar cell. Chem Mater 24:4109–411810.1021/cm5010483 ↗
8. Facchetti A (2013) Polymer donor–polymer acceptor (all-polymer) solar cells. Mater Today 16:123–13210.1016/j.mattod.2013.04.005 ↗
9. Ye L, Zhang S, Zhao W, YaoH Hou J (2014) Highly efficient 2D-conjugated benzodithiophene-based photovoltaic polymer with linear alkylthio side chain. Chem Mater 26:3603–360510.1021/cm501513n ↗
10. Walker B, Tamayo AB, Dang XD, Zalar P, Seo JH, Garcia A, Tantiwiwat M, Nguyen TQ (2009) Nanoscale phase separation and high photovoltaic efficiency in solution-processed, small-molecule bulk heterojunction solar cells. Adv Funct Mater 19:3063–306910.1002/adfm.200900832 ↗
11. Mishra A, Bauerle P (2012) Small molecule organic semiconductors on the move: promises for future solar energy technology. Angew Chem Int Ed 51:2020–206710.1002/anie.201102326 ↗
12. Lin Y, Ma L, Li Y, Liu Y, Zhu D, Zhan X (2014) Small-molecule solar cells with fill factors up to 0.75 via a layer-by-layer solution process. Adv Energy Mater 4:130062610.1002/aenm.201300626 ↗
13. Walker B, Kim C, Nguyen TQ (2010) Small molecule solution-processed bulk heterojunction solar cells. Chem Mater 23:470–48210.1021/cm102189g ↗
14. Welch GC, Bakus RC, Teat SJ, Bazan GC (2013) Impact of regiochemistry and isoelectronic bridgehead substitution on the molecular shape and bulk organization of narrow bandgap chromophores. J Am Chem Soc 135:2298–230510.1021/ja310694t ↗
15. Li Z, Dong Q, Yao S, Qian J, Wang Y, Jiang F, Yang H, Zhao Q, Hou Q, Meng W, Tong J, Xiong S, Tian W (2015) An efficient photovoltaic device based on novel D–A–D solution-processable small molecules. J Mater Sci 50:937–947. doi: 10.1007/s10853-014-8653-x10.1007/s10853-014-8653-x ↗
16. Kan B, Zhang Q, Li M, Wan X, Ni W, Long G, Wang Y, Yang X, Feng H, Chen Y (2014) Solution-processed organic solar cells based on dialkylthiol-substituted benzodithiophene unit with efficiency near 10 %. J Am Chem Soc 136(136):15529–1553210.1021/ja509703k ↗
17. Li D, Qian G, Wang ZY (2014) Synthesis and characterization of low band gap thiadiazolobenzo-imidazole chromophores. Synthetic Met 189:26–3310.1016/j.synthmet.2013.12.014 ↗
18. Wang L, Yin L, Ji C, Zhang Y, Gao H, Li Y (2014) High open-circuit voltage of the solution-processed organic solar cells based on benzothiadiazole–triphenylamine small molecules incorporating p-linkage. Org Electron 15:1138–114810.1016/j.orgel.2014.03.013 ↗
19. Liu L, Li H, Zhang X, Wei Y, Li J, Tian W (2014) Synthesis, characterization, and photovoltaic properties of acceptor–donor–acceptor organic small molecules with different terminal electron-withdrawing groups. J Mater Sci 49:5279–5288. doi: 10.1007/s10853-014-8228-x10.1007/s10853-014-8228-x ↗
20. Liu L, Li H, Yao S, Wei Y, Tian W (2015) Synthesis, characterization, and photovoltaic properties of a solution-processable two-dimensional-conjugated organic small molecule containing a triphenylamine core. J Mater Sci 50:57–65. doi: 10.1007/s10853-014-8565-910.1007/s10853-014-8565-9 ↗
21. Kyaw AKK, Wang DH, Gupta V, Zhang J, Chand S, Bazan GC, Heeger AJ (2013) efficient solution-processed small-molecule solar cells with inverted structure. Adv Mater 25:2397–240210.1002/adma.201300295 ↗
22. Love JA, Nagao I, Huang Y, Kuik M, Gupta V, Takacs CJ, Coughlin JE, Qi L, van der Poll TS, Kramer EJ, Heeger AJ, Nguyen TQ, Bazan GC (2014) Silaindacenodithiophene-based molecular donor: morphological features and use in the fabrication of compositionally tolerant, high-efficiency bulk heterojunction solar cells. J Am Chem Soc 136:3597–360610.1021/ja412473p ↗
23. Zhou H, Zhang Y, Mai CK, Collins SD, Nguyen TQ, Bazan GC, Heeger AJ (2014) Conductive conjugated polyelectrolyte as hole-transporting layer for organic bulk heterojunction solar cells. Adv Mater 26:780–78510.1002/adma.201302845 ↗
24. van der Poll TS, Love JA, Nguyen TQ, Bazan GC (2012) Non-basic High-performance molecules for solution-processed organic solar cells. Adv Mater 24:3646–364910.1002/adma.201201127 ↗
25. Sun Y, Welch GC, Leong WL, Takacs CJ, Bazan GC, Heeger AJ (2012) Solution-processed small-molecule solar cells with 6.7 % efficiency. Nat Mater 11:44–4810.1038/nmat3160 ↗
26. Paek S, Cho N, Song K, Jun MJ, Lee JK, Ko J (2012) Efficient organic semiconductors containing fluorine-substituted benzothiadiazole for solution-processed small molecule organic solar cells. J Phys Chem C 116:23205–2321310.1021/jp305989g ↗
27. Song KW, Choi MH, Han MH, Moon DK (2014) Open circuit voltage increase by substituted spacer and thieno[3,4-c]pyrrole-4,6-dione for polymer solar cells. J Ind Eng Chem 20:426–43410.1016/j.jiec.2013.04.037 ↗
28. Choi MH, Song KW, Moon DK, Haw JR (2015) Effects of side chains on solubility and morphology of poly(benzodithiohene-alt-alkylbithiophene) in organic photovoltaics. J Ind Eng Chem 29:120–12810.1016/j.jiec.2015.03.024 ↗
29. Lim E, Lee S, Lee KK, Kang IN, Moon SJ, Kong HY, Katz HE (2012) Solution-processable oligothiophenes with solubilizing b-alkyl groups for organic photovoltaic cells. Sol Energ Mater Sol C 107:165–17410.1016/j.solmat.2012.07.005 ↗
30. Gevaerts VS, Herzig EM, Kirkus M, Hendriks KH, Wienk MM, Perlich J, Muller-Buschbaum P, Janssen RAJ (2013) Influence of the position of the side chain on crystallization and solar cell performance of DPP-based small molecules. Chem Mater 26:916–92610.1021/cm4034484 ↗
31. Cho A, Kim Y, Song C, Moon SJ, Lim E (2014) Synthesis and characterization of fluorinated benzothiadiazole-based small molecules for organic solar cells. Sci Adv Mater 6:2411–241510.1166/sam.2014.2215 ↗
32. Cho N, Song K, Lee JK, Ko J (2012) Facile synthesis of fluorine-substituted benzothiadiazole-based organic semiconductors and their use in solution-processed small-molecule organic solar cells. Chem Eur J 18:11433–1143910.1002/chem.201201321 ↗
33. Zhou H, Yang L, Stuart AC, Price SC, Liu S, You W (2011) Development of fluorinated benzothiadiazole as a structural unit for a polymer solar cell of 7 % efficiency. Angew Chem Int Ed 50:2995–299810.1002/anie.201005451 ↗
34. de Leeuw DM, Simenon MMJ, Brown AR, Einerhand REF (1997) Stability of n-type doped conducting polymers and consequences for polymeric microelectronic devices. Synth Metals 87:53–5910.1016/S0379-6779(97)80097-5 ↗
35. Liu X, Sun Y, Hsu BBY, Lorbach A, Qi L, Heeger AJ, Bazan GC (2014) Design and properties of intermediate-sized narrow band-gap conjugated molecules relevant to solution-processed organic solar cells. J Am Chem Soc 136:5697–570810.1021/ja413144u ↗
36. Wang X, Zhang ZG, Luo H, Chen S, Yu S, Wang H, Li X, Yu G, Li Y (2014) Effects of fluorination on the properties of thieno[3,2-b]thiophene-bridged donor–p–acceptor polymer semiconductors. Polym Chem 5:502–51110.1039/C3PY00940H ↗
37. Shin SA, Kim JH, Park JB, Kang IN, Park MJ, Hwang DH (2013) Synthesis and photovoltaic properties of a new low-bandgap polymer consisting of benzodithiophene and fluorinated benzoselenadiazole units. Macromol Chem Phys 214:1780–178810.1002/macp.201300308 ↗
38. Steinberger S, Mishra A, Reinold E, Levichkov J, Uhrich C, Pfeiffer M, Bauerle P (2011) Vacuum-processed small molecule solar cells based on terminal acceptor-substituted low-band gap oligothiophenes. Chem Commun 47:1982–198410.1039/c0cc04541a ↗
39. Li Y, Zou J, Yip HL, Li CZ, Zhang Y, Chueh CC, Intemann J, Xu Y, Liang PW, Chen Y, Jen AKY (2013) Side-chain effect on cyclopentadithiophene/fluorobenzothiadiazole-based low band gap polymers and their applications for polymer solar cells. Macromolecules 46(2013):5497–550310.1021/ma4009302 ↗
40. Eftaiha AF, Sun JP, Hill IG, Welch GC (2014) Recent advances of non-fullerene, small molecular acceptors for solution processed bulk heterojunction solar cells. J Mater Chem A 2:1201–121310.1039/C3TA14236A ↗
41. Garcia A, Welch GC, Ratcliff EL, Ginley DS, Bazan GC, Olson DC (2012) Improvement of interfacial contacts for new small-molecule bulk-heterojunction organic photovoltaics. Adv Mater 24:5368–537310.1002/adma.201200963 ↗
42. Yasfasfaou J, Dou L, Yoshimura K, Kato T, Ohya K, Moriarty T, Emery K, Chen CC, Gao J, Li G, Yang Y (2013) A polymer tandem solar cell with 10.6 % power conversion efficiency. Nat Commun 4:144610.1038/ncomms2411 ↗