journal article·2021-04

Self-passivated hybrid perovskite films for improved photovoltaic performance of solar cells

Xingnan Qi, Tingting Zhang, Furui Tan, Yantao Mei, Junyi Huang, Gentian Yue, Yueyue Gao, Rong Liu, Chen Dong, Lisheng Zhang, Weifeng Zhang

Journal of Materials Science· Volume 56· Issue 10
Publisher page

Abstract

Defect passivation management of perovskite films is of great importance in improving the performance of perovskite solar cells. Various in situ or post-passivation strategies were adopted to modify the optoelectric properties of perovskite films. However, these modifications increased the fabrication complexity and cost of the devices. Here, we developed a facile self-passivation strategy to effectively decrease charge trap states and suppress the non-radiative recombination loss in perovskite films. By simply aging the precursor solution, we found that the fabricated perovskite films possess residual PbI2 phase that could decrease trap density, enhance the radiative recombination intensity, and facilitate charge transfer and collection. Therefore, the solar cells with this self-passivated perovskite film generated an increased efficiency of 21.1% compared to that of 19.9% for the control devices from fresh precursor solution.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Kojima A, Teshima K, Shirai Y, Miyasaka T (2009) Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. J Am Chem Soc 131:6050–6051. https://doi.org/10.1021/ja809598r10.1021/ja809598r ↗
2. Jeon NJ, Noh JH, Kim YC, Yang WS, Ryu SC, Seok SI (2014) Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells. Nat Mater 13:897–903. https://doi.org/10.1038/nmat401410.1038/nmat4014 ↗
3. Snaith HJ (2013) Perovskites: the emergence of a new era for low-cost, high efficiency solar cells. J Phys Chem Lett 4:3623–3630. https://doi.org/10.1021/jz402016210.1021/jz4020162 ↗
4. Tan FR, Tan HR, Saidaminov MI et al (2019) In situ back contact passivation improves photovoltage and fill factor in perovskite solar cells. Adv Mater 31:1807435–1807441. https://doi.org/10.1002/adma.20180743510.1002/adma.201807435 ↗
5. Mojtaba AJ, Zahra AG, Cacovich S et al (2018) Maximizing and stabilizing luminescence from halide perovskites with potassium passivation. Nature 555:497–501. https://doi.org/10.1038/nature2598910.1038/nature25989 ↗
6. Dong C, Han XX, Li WH, Qiu QQ, Wang JQ (2019) Anti-solvent assisted multi-step deposition for efficient and stable carbon-based CsPbI2Br all-inorganic perovskite solar cell. Nano Energy 59:553–559. https://doi.org/10.1016/j.nanoen.2019.02.07510.1016/j.nanoen.2019.02.075 ↗
7. Bergmann VW, Weber SAL, Ramos FJ et al (2014) Real-space observation of unbalanced charge distribution inside a perovskite-sensitized solar cell. Nat Commun 5:5001–5010. https://doi.org/10.1038/ncomms600110.1038/ncomms6001 ↗
8. Prochowicz D, Yadav P, Saliba M et al (2018) One-step mechanochemical incorporation of an insoluble cesium additive for high performance planar heterojunction solar cells. Nano Energy 49:523–528. https://doi.org/10.1016/j.nanoen.2018.05.01010.1016/j.nanoen.2018.05.010 ↗
9. Peng J, Khan JI, Liu WZ et al (2018) A universal double-side passivation for high open-circuit voltage in perovskite solar cells: role of carbonyl groups in poly (methyl methacrylate). Adv Energy Mater 8:1801208–1801217. https://doi.org/10.1002/aenm.20180120810.1002/aenm.201801208 ↗
10. Dong C, Han XX, Zhao Y, Li JJ, Chang L, Zhao WN (2018) A green anti-solvent process for high performance carbon-based CsPbI2Br all-inorganic perovskite solar cell. Solar RRL 2:1800139–1800147. https://doi.org/10.1002/solr.20180013910.1002/solr.201800139 ↗
11. Green MA, Dunlop ED, Levi DH, Hohl-Ebinger J, Yoshita M, Ho-Baillie AWY (2019) Solar cell efficiency tables (version 54). Prog Photovolt 27:565–575. https://doi.org/10.1002/pip.317110.1002/pip.3171 ↗
12. Wang Y, Zhang TY, Kan M, Zhao YX (2018) Bifunctional stabilization of all-inorganic α-CsPbI3 perovskite for 17% efficiency photovoltaics. J Am Chem Soc 140:12345–12348. https://doi.org/10.1021/jacs.8b0792710.1021/jacs.8b07927 ↗
13. Jiang Q, Zhao Y, Zhang XW et al (2019) Surface passivation of perovskite film for efficient solar cells. Nat Photonics 13:460–466. https://doi.org/10.1038/s41566-019-0398-210.1038/s41566-019-0398-2 ↗
14. Shi L, Hao HY, Dong JJ, Zhong TT, Zhang C, Hao JB, Xing J, Liu H (2019) Solvent engineering for intermediates phase, all-ambient-air-processed in organic–inorganic hybrid perovskite solar cells. Nanomaterials 9:1–14. https://doi.org/10.3390/nano907091510.3390/nano9070915 ↗
15. Zhang X, Xiong H, Qi JB, Hou CY, Li YG, Zhang QH, Wang HZ (2018) Antisolvent-derived intermediate phases for low-temperature flexible perovskite solar cells. ACS Appl Energy Mater 1:6477–6486. https://doi.org/10.1021/acsaem.8b0141310.1021/acsaem.8b01413 ↗
16. Joshi PH, Zhang L, Hossain IM, Abbas HA, Kottokkaran R, Nehra SP, Dhaka M, Noack M, Dalal VL (2016) The physics of photon induced degradation of perovskite solar cells. AIP Adv 6:115114. https://doi.org/10.1063/1.496781710.1063/1.4967817 ↗
17. Qian F, Yuan SH, Cai Y, Han Y, Zhao H, Sun J, Liu ZK, Liu SZ (2019) Novel surface passivation for stable FA0.85MA0.15PbI3 perovskite solar cells with 21.6% efficiency. Solar RRL 3:1900072–1900081. https://doi.org/10.1002/solr.20190007210.1002/solr.201900072 ↗
18. Yuan JF, Zhang LX, Bi CH, Wang MR, Tian JJ (2018) Surface trap states passivation for high-performance inorganic perovskite solar cells. Solar RRL 2:1800188–1800194. https://doi.org/10.1002/solr.20180018810.1002/solr.201800188 ↗
19. Yang S, Dai J, Yu ZH, Shao YC, Zhou Y, Xiao X, Zeng XC, Huang JS (2019) Tailoring passivation molecular structures for extremely small open circuit voltage loss in perovskite solar cells. J Am Chem Soc 141:5781–5787. https://doi.org/10.1021/jacs.8b1309110.1021/jacs.8b13091 ↗
20. Lang F, Gluba MA, Albrecht S, Shargaieva O, Rappich J, Korte L, Rech B, Nickel NH (2016) In situ graphene doping as a route toward efficient perovskite tandem solar cells. Phys Status Solidi A 213:1989–1996. https://doi.org/10.1002/pssa.20153294410.1002/pssa.201532944 ↗
21. Guo ZL, Gao LG, Teo ZH, Xu S, Zhang C, Kamata Y, Hayase S, Ma TL (2018) High electrical conductivity 2D mXene serves as additive of perovskite for efficient solar cells. Small 14:1802738–1802746. https://doi.org/10.1002/smll.20180273810.1002/smll.201802738 ↗
22. Wang S, Zhu Y, Wang CY, Ma RX (2019) Interface modification by a multifunctional ammonium salt for high performance and stable planar perovskite solar cells. J Mater Chem A 7:11867–11876. https://doi.org/10.1039/C9TA02631B10.1039/C9TA02631B ↗
23. Zhao PJ, Kim BJ, Jung HS (2018) Passivation in perovskite solar cells: a review. Mater Today Energy 7:267–286. https://doi.org/10.1016/j.mtener.2018.01.00410.1016/j.mtener.2018.01.004 ↗
24. Ghoreishi FS, Ahmadi V, Poursalehi R, SamadPour M, Johansson MB, Boschloo G, ErikMJ J (2020) Enhanced performance of CH3NH3PbI3 perovskite solar cells via interface modification using phenyl ammonium iodide derivatives. J Power Sources 473:374–389. https://doi.org/10.1016/j.jpowsour.2020.22849210.1016/j.jpowsour.2020.228492 ↗
25. Xiong H, Zabihi F, Wang HZ, Zhang QH, Eslamian M (2018) Grain engineering by ultrasonic substrate vibration post treatment of wet perovskite films for annealing-free, high performance, and stable perovskite solar cells. Nanoscale 10:8526–8535. https://doi.org/10.1039/C8NR00540K10.1039/C8NR00540K ↗
26. Tsai H, Nie W, Lin Y et al (2017) Effect of precursor solution aging on the crystallinity and photovoltaic performance of perovskite solar cells. Adv Energy Mater 7:1602159. https://doi.org/10.1002/aenm.20160215910.1002/aenm.201602159 ↗
27. Tan HR, Jain A, Voznyy O et al (2017) Efficient and stable solution-processed planar perovskite solar cells via contact passivation. Science 355:722–726. https://doi.org/10.1126/science.aai908110.1126/science.aai9081 ↗
28. Song ZN, Abate A, Watthage SC, Liyanage GK, Phillips AB, Steiner U, Graetzel M, Heben MJ (2016) Perovskite solar cell stability in humid air: partially reversible phase transitions in the PbI2-CH3NH3I-H2O system. Adv Energy Mater 6:1600846–1600853. https://doi.org/10.1002/aenm.20160084610.1002/aenm.201600846 ↗
29. Chen YH, Li NX, Wang LG et al (2019) Impacts of alkaline on the defects property and crystallization kinetics in perovskite solar cells. Nat Commun 10:1112–1122. https://doi.org/10.1038/s41467-019-09093-110.1038/s41467-019-09093-1 ↗
30. Karlsen EM, Spanget-Larsen J (2009) FTIR investigation of the reaction between pyridine and iodine in a polyethylene host. Formation of N-iodopyridinium polyiodide. Chem Phys Lett 473:227–232. https://doi.org/10.1016/j.cplett.2009.04.00510.1016/j.cplett.2009.04.005 ↗
31. Feng MH, You S, Cheng N, Du JH (2019) High quality perovskite film solar cell using methanol as additive with 19.5% power conversion efficiency. Electrochim Acta 293:356–363. https://doi.org/10.1016/j.electacta.2018.09.19510.1016/j.electacta.2018.09.195 ↗
32. Zhang F, Wang Z, Zhu H et al (2017) Over 20% PCE perovskite solar cells with superior stability achieved by novel and low-cost hole-transporting materials. Nano Energy 41:469–475. https://doi.org/10.1016/j.nanoen.2017.09.03510.1016/j.nanoen.2017.09.035 ↗
33. Wang LL, McCleese C, Kovalsky A, Zhao YX, Burda C (2014) Femtosecond time-resolved transient absorption spectroscopy of CH3NH3PbI3 perovskite films: evidence for passivation effect of PbI2. J Am Chem Soc 136:12205–12208. https://doi.org/10.1021/ja504632z10.1021/ja504632z ↗
34. Jiang Q, Chu ZM, Wang PY et al (2017) Planar-structure perovskite solar cells with efficiency beyond 21%. Adv Mater 29:1703852–1703859. https://doi.org/10.1002/adma.20170385210.1002/adma.201703852 ↗
35. Wang Z, Baranwal AK, Kamarudin MA, Ng CH, Pandey M, Ma T, Hayase S (2019) Xanthate-induced sulfur doped all-inorganic perovskite with superior phase stability and enhanced performance. Nano Energy 59:258–267. https://doi.org/10.1016/j.nanoen.2019.02.04910.1016/j.nanoen.2019.02.049 ↗
36. Liu L, Huang S, Lu Y et al (2018) Grain-boundary “patches” by in situ conversion to enhance perovskite solar cells stability. Adv Mater 30:1800544. https://doi.org/10.1002/adma.20180054410.1002/adma.201800544 ↗
37. Wu Y, Chen W, Lin YT, Lan X, Wu Z, Liu R, Djurisic B, He ZB (2018) General method to define the type of carrier transport materials for perovskite solar cells via Kelvin probes microscopy. ACS Appl Energy Mater 1:3984–3991. https://doi.org/10.1021/acsaem.8b0068710.1021/acsaem.8b00687 ↗
38. Yang C, Du P, Dai ZS, Li HQ, Yang XD, Chen QL (2019) Effects of illumination direction on the surface potential of CH3NH3PbI3 perovskite films probed by Kelvin probe force microscopy. ACS Appl Mater Interfaces 11:14044–14050. https://doi.org/10.1021/acsami.8b2177410.1021/acsami.8b21774 ↗
39. Barnea-Nehoshtan L, Kirmayer S, Edri E, Hodes G, Cahen D (2014) Surface photovoltage spectroscopy study of organo-lead perovskite solar cells. J Phys Chem Lett 5:2408–2413. https://doi.org/10.1021/jz501163r10.1021/jz501163r ↗
40. Guo ZL, Teo S, Xu ZH, Zhang C, Kamata Y, Hayase S, Ma TL (2019) Achievable high Voc of carbon based all-inorganic CsPbIBr 2 perovskite solar cells through interface engineering. J Mater Chem A 7:1227–1232. https://doi.org/10.1039/C8TA09838G10.1039/C8TA09838G ↗
41. Niu G, Li W, Meng F, Wang L, Dong H, Qiu Y (2014) Study on the stability of CH3NH3PbI3 films and the effect of post-modification by aluminum oxide in all-solid-state hybrid solar cells. J Mater Chem A 2:705–710. https://doi.org/10.1039/c3ta13606j10.1039/c3ta13606j ↗
42. Wang Q, Dong Q, Li T, Gruverman A, Huang J (2016) Thin insulating tunneling contacts for efficient and water-resistant perovskite solar cells. Adv Mater 28:6734–6739. https://doi.org/10.1002/adma.20160096910.1002/adma.201600969 ↗