Phase composition of ceramic samples of the BaTiO3–PbTiO3–BaZrO3 system near BaTiO3
Source abstract
Abstract
Ceramics (1 − x) Ba(Ti1 – yZry)O3·xPbTiO3 with x = 0, y = 0; x = 0, y = 0.05; x = 0.05, y = 0.05; x = 0.10, y = 0.05; x = 0.15, y = 0.05; x = 0.20, y = 0.05 were obtained by solid-state mixed oxide method at 1400 °C. Phase composition of the ceramic samples was determined by the Rietveld method using powder diffraction data. At the first stage, the refinement was done for the two most representative sections of the registered XRD patterns, namely: 2θ = 44.6 °–46.2 ° and 2θ = 55.4 °–57.2 °. At the second stage, the refinement for the full XRD patterns was performed. The quantitative content of phases and their crystallographic data is determined. All samples contain a perovskite tetragonal phase (space group P4 mm). The cubic phase (space group Pm-3 m) is present in the samples with x = 0, y = 0; x = 0, y = 0.05; x = 0.05, y = 0.05; x = 0.10, y = 0.05. The orthorhombic phase (space group Amm2) is contained in the samples with x = 0, y = 0.05; x = 0.05, y = 0.05; x = 0.10, y = 0.05; x = 0.15, y = 0.05. Substitution of Ti for Zr in the tetragonal form of BaTiO3 reduces the tetragonal distortion of the unit cell. Substitution of Ba for Pb increases the tetragonal distortion of the unit cell.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Lemanov VV (2007) Barium titanate-based solid solutions. Ferroelectrics 354:69–76. https://doi.org/10.1080/0015019070145454510.1080/00150190701454545 ↗
2. Zhang Q, Zhai J, Kong LB (2012) Relaxor ferroelectric materials for microwave tunable applications. JAdv Dielectr 2:123000210.1142/S2010135X12300022 ↗
3. Hennings D, Schnell A, Simon G (1982) Diffuse ferroelectric phase transitions in Ba(Ti1−yZry)O3 ceramics. J Am Ceram Soc 65:539–54410.1111/j.1151-2916.1982.tb10778.x ↗
4. Avrahami Y, Tuller HI (2004) Improved electromechanical response in rhombohedral BaTiO3. J Elecroceram 13:463–46910.1007/s10832-004-5143-6 ↗
5. Deluca M, Vasilescu CA, Ianculescu AC, Berger DC, Ciomaga CE, Curecheriu LP, Stoleriu L, Gajovic A, Mitoseriu L, Galassi C (2012) Investigation of the composition-dependent properties of Ba(Ti1−xZrx)O3 ceramics prepared by the modified Pechini method. J Eur Ceram Soc 32:3551–356610.1016/j.jeurceramsoc.2012.05.007 ↗
6. Huang HH, Chiu HH, Wu NC, Wang MC (2008) Tetragonality and properties of Ba(Ti1-xZrx)O3 ceramics determined using the Rietveld method. Metallurgical and Materials Transactions A 39A:3276–328210.1007/s11661-008-9622-2 ↗
7. Xu Y (1991) Ferroelectric materials and their application. Elsevier, Amsterdam, p 62
8. Stepanov AV, Bush AA, Kamentsev KE et al (2018) Phase diagram and dielectric properties of (1–x)Ba(Ti1−yZry)·xPbTiO3 ceramics. Inorg Mater 54:208–21910.1134/S0020168518020140 ↗
9. Kraus W, Nolze G (1996) Powder cell: a program for the representation and manipulation of crystal structures and calculation of the resulting X-ray powder patterns. J Appl Crystallogr 29:301–30310.1107/S0021889895014920 ↗
10. Rodriguez-Carvajal J (1993) Recent advances in magnetic structure determination by neutron powder diffraction. Phys B 192:55–6910.1016/0921-4526(93)90108-I ↗
11. Will G (2006) Powder diffraction: the rietveld method and the two stage method to determine and refine crystal structures from powder diffraction data. Springer, Heidelberg, p 231
12. Kwei GH, Lawson AC, Billinge JL (1993) Structures of the ferroelectric phases of barium titanate. J Phys Chem 97:2368–237710.1021/j100112a043 ↗
13. Takeuchi T, Ado K, Tl A et al (1994) Thickness of cubic surface phase on barium titanate single-crystalline grains. J Am Ceram Soc 77:1665–166810.1111/j.1151-2916.1994.tb09774.x ↗
14. Miot C, Proust C, Husson E (1995) Dense ceramics of BaTiO3 produced from powders prepared by a chemical process. J Eur Ceram Soc 15:1163–117010.1016/0955-2219(95)00090-9 ↗
15. Hoshina T (2013) Size effect of barium titanate: fine particles and ceramics. J Ceram Soc Jpn 121:156–16110.2109/jcersj2.121.156 ↗
16. Bush A, Sirotinkin V, Ivanov S (2020) Cubic and tetragonal modifications in BaTiO3 ceramic samples: X-Ray diffraction analysis by the Rietveld method. Crystallography reports 6510.1134/S106377452005003X ↗
17. Kumar K, Rajeev R (2013) Anomalous piezoelectric response due to stabilization of two ferroelectric phases in Zr-modified BaTiO3. J Phys Condens Matter 25:36220310.1088/0953-8984/25/36/362203 ↗
18. Kaminsky W (2005) WinXMorph: a computer program to draw crystal morphology, growth sectors and cross sections with export files in VRML utf8-virtual reality format. J Appl Crystallogr 38:566–56710.1107/S0021889805012148 ↗
19. Tillmanns E (1972) Tetrabarium tridecatitanate, Ba4Ti13O30. Cryst struct commun 11:2087–2092
20. Ikeda T (1959) Studies on (Ba–Pb)(Ti–Zr)O3 system. J Phys Soc Jpn 14:168–17410.1143/JPSJ.14.168 ↗