journal article·2021-12

Efficient defect passivation for high performance perovskite solar cell by adding alizarin red S

Huxin Luo, Xingchong Liu, Jia Zhuang, Haimin Li, Hanyu Wang, Zhu Ma, Yan Xiang, Xian Peng, Yukun Ouyang, Ruonan Zhou, Xiaoli Gong

Journal of Materials Science· Volume 56· Issue 35
Publisher page

Abstract

Planar perovskite solar cells (PSCs) have excellent photoelectric properties and show great commercialization potential. However, there are a lot of crystal defects in the perovskite films prepared by solution method, which reduces the development process of solar cells. In this work, alizarin red s (ARS) was doped into MAPbI3 films to passivate the defect. It was shown that the addition of ARS increased the quality of perovskite film and doped perovskite film exhibited improved light absorption. In addition, it was found that there was a strong interaction between ARS and perovskite, which reduced the density of defect states. The results showed that the passivated perovskite device had improved PL intensity, increased carrier lifetimes and reduced charge recombination. After passivation, the device obtained a higher open-circuit voltage (VOC) of 1.103 V where the control device was 1.055 V, and the best power conversion efficiency (PCE) of the doped device was 18.82%, which is 11.36% higher than that of the control device of 16.90%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Zhao S, Zhuang J, Liu X, Zhang H, Zheng R, Peng X, Gong X, Guo H, Wang H, Li H (2021) F4-TCNQ doped strategy of nickel oxide as high-efficient hole transporting materials for invert perovskite solar cell. Mater Sci Semicond Process. https://doi.org/10.1016/j.mssp.2020.10545810.1016/j.mssp.2020.105458 ↗
2. Xie J, Zhou Z, Qiao H, Chen M, Wang L, Yang S, Hou Y, Yang H (2021) Modulating MAPbI3 perovskite solar cells by amide molecules: Crystallographic regulation and surface passivation. J Energy Chem 56:179–185. https://doi.org/10.1016/j.jechem.2020.07.05010.1016/j.jechem.2020.07.050 ↗
3. Chen W, Wu Y, Yue Y, Liu J, Zhang W, Yang X, Chen H, Bi E, Ashraful I, Graetzel M, Han L (2015) Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers. Science 350(6263):944–948. https://doi.org/10.1126/science.aad101510.1126/science.aad1015 ↗
4. Huang J, Yuan Y, Shao Y, Yan Y (2017) Understanding the physical properties of hybrid perovskites for photovoltaic applications. Nat Rev Mater. https://doi.org/10.1038/natrevmats.2017.4210.1038/natrevmats.2017.42 ↗
5. Kojima A, Teshima K, Shirai Y, Miyasaka T (2009) Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells. J Am Chem Soc. https://doi.org/10.1021/ja809598r10.1021/ja809598r ↗
6. Chen Y, Tan S, Li N, Huang B, Niu X, Li L, Sun M, Zhang Y, Zhang X, Zhu C, Yang N, Zai H, Wu Y, Ma S, Bai Y, Chen Q, Xiao F, Sun K, Zhou H (2020) Self-Elimination of Intrinsic Defects Improves the Low-Temperature Performance of Perovskite Photovoltaics. Joule 4(9):1961–1976. https://doi.org/10.1016/j.joule.2020.07.00610.1016/j.joule.2020.07.006 ↗
7. Pazos-Outon LM, Xiao TP, Yablonovitch E (2018) Fundamental Efficiency Limit of Lead Iodide Perovskite Solar Cells. J Phys Chem Lett 9(7):1703–1711. https://doi.org/10.1021/acs.jpclett.7b0305410.1021/acs.jpclett.7b03054 ↗
8. Wang R, Xue J, Meng L, Lee J-W, Zhao Z, Sun P, Cai L, Huang T, Wang Z, Wang Z-K, Duan Y, Yang JL, Tan S, Yuan Y, Huang Y, Yang Y (2019) Caffeine Improves the Performance and Thermal Stability of Perovskite Solar Cells. Joule 3(6):1464–1477. https://doi.org/10.1016/j.joule.2019.04.00510.1016/j.joule.2019.04.005 ↗
9. Chen Q, De Marco N, Yang Y, Song T-B, Chen C-C, Zhao H, Hong Z, Zhou H, Yang Y (2015) Under the spotlight: The organic-inorganic hybrid halide perovskite for optoelectronic applications. Nano Today 10(3):355–396. https://doi.org/10.1016/j.nantod.2015.04.00910.1016/j.nantod.2015.04.009 ↗
10. Guo Y, Wu H, Liu Z, Shan S, Niu B, Lian X, Zuo L, Chen H (2021) Manipulating Perovskite Precursor Solidification toward 21% Pristine MAPbI3 Solar Cells. Solar Rrl. https://doi.org/10.1002/solr.20210011410.1002/solr.202100114 ↗
11. Zhang F, Zhu K (2020) Additive Engineering for Efficient and Stable Perovskite Solar Cells. Adv Energy Mater. https://doi.org/10.1002/aenm.20190257910.1002/aenm.201902579 ↗
12. Wu T, Wang Y, Li X, Wu Y, Meng X, Cui D, Yang X, Han L (2019) Efficient Defect Passivation for Perovskite Solar Cells by Controlling the Electron Density Distribution of Donor-pi-Acceptor Molecules. Adv Energy Mater. https://doi.org/10.1002/aenm.20180376610.1002/aenm.201803766 ↗
13. Lin Y, Shen L, Dai J, Deng Y, Wu Y, Bai Y, Zheng X, Wang J, Fang Y, Wei H, Ma W, Zeng XC, Zhan X, Huang J (2017) pi-Conjugated Lewis Base: Efficient Trap-Passivation and Charge-Extraction for Hybrid Perovskite Solar Cells. Adv Mater. https://doi.org/10.1002/adma.20160454510.1002/adma.201604545 ↗
14. Luo D, Su R, Zhang W, Gong Q, Zhu R (2020) Minimizing non-radiative recombination losses in perovskite solar cells. Nat Rev Mater 5(1):44–60. https://doi.org/10.1038/s41578-019-0151-y10.1038/s41578-019-0151-y ↗
15. Caprioglio P, Stolterfoht M, Wolff CM, Unold T, Rech B, Albrecht S, Neher D (2019) On the Relation between the Open-Circuit Voltage and Quasi-Fermi Level Splitting in Efficient Perovskite Solar Cells. Adv Energy Mater. https://doi.org/10.1002/aenm.20190163110.1002/aenm.201901631 ↗
16. Chen B, Rudd PN, Yang S, Yuan Y, Huang J (2019) Imperfections and their passivation in halide perovskite solar cells. Chem Soc Rev 48(14):3842–3867. https://doi.org/10.1039/c8cs00853a10.1039/c8cs00853a ↗
17. Christians JA, Miranda Herrera PA, Kamat PV (2015) Transformation of the Excited State and Photovoltaic Efficiency of CH3NH3PbI3 Perovskite upon Controlled Exposure to Humidified Air. J Am Chem Soc 137(4):1530–1538. https://doi.org/10.1021/ja511132a10.1021/ja511132a ↗
18. Ran C, Xu J, Gao W, Huang C, Dou S (2018) Defects in metal triiodide perovskite materials towards high-performance solar cells: origin, impact, characterization, and engineering. Chem Soc Rev 47(12):4581–4610. https://doi.org/10.1039/c7cs00868f10.1039/c7cs00868f ↗
19. Wang S, Wang A, Deng X, Xie L, Xiao A, Li C, Xiang Y, Li T, Ding L, Hao F (2020) Lewis acid/base approach for efficacious defect passivation in perovskite solar cells. J Mater Chem A 8(25):12201–12225. https://doi.org/10.1039/d0ta03957h10.1039/d0ta03957h ↗
20. Noel NK, Abate A, Stranks SD, Parrott ES, Burlakov VM, Goriely A, Snaith HJ (2014) Enhanced Photoluminescence and Solar Cell Performance via Lewis Base Passivation of Organic Inorganic Lead Halide Perovskites. ACS Nano 8(10):9815–9821. https://doi.org/10.1021/nn503647610.1021/nn5036476 ↗
21. Peng J, Khan JI, Liu W, Ugur E, Duong T, Wu Y, Shen H, Wang K, Dang H, Aydin E, Yang X, Wan Y, Weber KJ, Catchpole KR, Laquai F, De Wolf S, White TP (2018) A Universal Double-Side Passivation for High Open-Circuit Voltage in Perovskite Solar Cells: Role of Carbonyl Groups in Poly(methyl methacrylate). Adv Energy Mater. https://doi.org/10.1002/aenm.20180120810.1002/aenm.201801208 ↗
22. Wang S, Ma Z, Liu B, Wu W, Zhu Y, Ma R, Wang C (2018) High-Performance Perovskite Solar Cells with Large Grain-Size obtained by using the Lewis Acid-Base Adduct of Thiourea. Solar Rrl. https://doi.org/10.1002/solr.20180003410.1002/solr.201800034 ↗
23. Xu J, Buin A, Ip AH, Li W, Voznyy O, Comin R, Yuan M, Jeon S, Ning Z, McDowell JJ, Kanjanaboos P, Sun J-P, Lan X, Quan LN, Kim DH, Hill IG, Maksymovych P, Sargent EH (2015) Perovskite-fullerene hybrid materials suppress hysteresis in planar diodese. Nat Commun. https://doi.org/10.1038/ncomms808110.1038/ncomms8081 ↗
24. Zhang J, Chen R, Wu Y, Shang M, Zeng Z, Zhang Y, Zhu Y, Han L (2018) Extrinsic Movable Ions in MAPbI3 Modulate Energy Band Alignment in Perovskite Solar Cells. Adv Energy Mater. https://doi.org/10.1002/aenm.20170198110.1002/aenm.201701981 ↗
25. Li N, Tao S, Chen Y, Niu X, Onwudinanti CK, Hu C, Qiu Z, Xu Z, Zheng G, Wang L, Zhang Y, Li L, Liu H, Lun Y, Hong J, Wang X, Liu Y, Xie H, Gao Y, Bai Y, Yang S, Brocks G, Chen Q, Zhou H (2019) Cation and anion immobilization through chemical bonding enhancement with fluorides for stable halide perovskite solar cells. Nat Energy 4(5):408–415. https://doi.org/10.1038/s41560-019-0382-610.1038/s41560-019-0382-6 ↗
26. Kanwat A, Yantara N, Ng YF, Hooper TJN, Rana PJS, Febriansyah B, Harikesh PC, Salim T, Vashishtha P, Mhaisalkar SG, Mathews N (2020) Stabilizing the Electroluminescence of Halide Perovskites with Potassium Passivation. ACS Energy Lett 5(6):1804–1813. https://doi.org/10.1021/acsenergylett.0c0055310.1021/acsenergylett.0c00553 ↗
27. Wang R, Xue J, Wang K-L, Wang Z-K, Luo Y, Fenning D, Xu G, Nuryyeva S, Huang T, Zhao Y, Yang JL, Zhu J, Wang M, Tan S, Yavuz I, Houk KN, Yang Y (2019) Constructive molecular configurations for surface-defect passivation of perovskite photovoltaics. Science. https://doi.org/10.1126/science.aay969810.1126/science.aay9698 ↗
28. Zheng X, Deng Y, Chen B, Wei H, Xiao X, Fang Y, Lin Y, Yu Z, Liu Y, Wang Q, Huang J (2018) Dual Functions of Crystallization Control and Defect Passivation Enabled by Sulfonic Zwitterions for Stable and Efficient Perovskite Solar Cells. Adv Mater. https://doi.org/10.1002/adma.20180342810.1002/adma.201803428 ↗
29. Zhang H, Wu Y, Shen C, Li E, Yan C, Zhang W, Tian H, Han L, Zhu W-H (2019) Efficient and Stable Chemical Passivation on Perovskite Surface via Bidentate Anchoring. Adv Energy Mater. https://doi.org/10.1002/aenm.20180357310.1002/aenm.201803573 ↗
30. Fain VY, Zaitsev BE, Ryabov MA (2004) Metal Complexes with Alizarin and Alizarin Red S: Electronic Absorption Spectra and Structure of Ligands. Russ J Coord Chem 30(5):365–370. https://doi.org/10.1023/B:RUCO.0000026008.98495.5110.1023/B:RUCO.0000026008.98495.51 ↗
31. Li Z, Wang L, Wang X (2017) Design of fluorescent probes with alizarin red and thedetection of Pb2+ in cosmetics. Chin J Anal Lab 36(5):433–436
32. Zhang Y, Fei Z, Gao P, Lee Y, Tirani FF, Scopelliti R, Feng Y, Dyson PJ, Nazeeruddin MK (2017) A Strategy to Produce High Efficiency, High Stability Perovskite Solar Cells Using Functionalized Ionic Liquid-Dopants. Advanced Materials 29 (36). doi: https://doi.org/10.1002/adma.20170215710.1002/adma.201702157 ↗
33. Cao X, Zhi L, Li Y, Fang F, Cui X, Yao Y, Ci L, Ding K, Wei J (2017) Elucidating the Key Role of a Lewis Base Solvent in the Formation of Perovskite Films Fabricated from the Lewis Adduct Approach. ACS Appl Mater Interfaces 9(38):32868–32875. https://doi.org/10.1021/acsami.7b0721610.1021/acsami.7b07216 ↗
34. Lee J-W, Kim H-S, Park N-G (2016) Lewis Acid-Base Adduct Approach for High Efficiency Perovskite Solar Cells. Acc Chem Res 49(2):311–319. https://doi.org/10.1021/acs.accounts.5b0044010.1021/acs.accounts.5b00440 ↗
35. Kong W, Ding T, Bi G, Wu H (2016) Optical characterizations of the surface states in hybrid lead–halide perovskites. Phys Chem Chem Phys 18(18):12626–12632. https://doi.org/10.1039/C6CP00325G10.1039/C6CP00325G ↗
36. Jeon NJ, Noh JH, Kim YC, Yang WS, Ryu S, Seok SI (2014) Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells. Nat Mater 13(9):897–903. https://doi.org/10.1038/nmat401410.1038/nmat4014 ↗
37. Lee J-W, Bae S-H, Hsieh Y-T, De Marco N, Wang M, Sun P, Yang Y (2017) A Bifunctional Lewis Base Additive for Microscopic Homogeneity in Perovskite Solar Cells. Chem 3(2):290–302. https://doi.org/10.1016/j.chempr.2017.05.02010.1016/j.chempr.2017.05.020 ↗
38. Chen J, Kim S-G, Ren X, Jung HS, Park N-G (2019) Effect of bidentate and tridentate additives on the photovoltaic performance and stability of perovskite solar cells. J Mater Chem A 7(9):4977–4987. https://doi.org/10.1039/c8ta11977e10.1039/c8ta11977e ↗
39. Guo P, Ye Q, Yang X, Zhang J, Xu F, Shchukin D, Wei B, Wang H (2019) Surface & grain boundary co-passivation by fluorocarbon based bifunctional molecules for perovskite solar cells with efficiency over 21%. J Mater Chem A 7(6):2497–2506. https://doi.org/10.1039/c8ta11524a10.1039/c8ta11524a ↗
40. Li Y, Shi J, Zheng J, Bing J, Yuan J, Cho Y, Tang S, Zhang M, Yao Y, Lau CFJ, Lee DS, Liao C, Green MA, Huang S, Ma W, Ho-Baillie AWY (2020) Acetic Acid Assisted Crystallization Strategy for High Efficiency and Long-Term Stable Perovskite Solar Cell. Adv Sci. https://doi.org/10.1002/advs.20190336810.1002/advs.201903368 ↗
41. Kim M, Motti SG, Sorrentino R, Petrozza A (2018) Enhanced solar cell stability by hygroscopic polymer passivation of metal halide perovskite thin film. Energy Environ Sci 11(9):2609–2619. https://doi.org/10.1039/c8ee01101j10.1039/c8ee01101j ↗
42. Hou M, Xu Y, Zhou B, Tian Y, Wu Y, Zhang D, Wang G, Li B, Ren H, Li Y, Huang Q, Ding Y, Zhao Y, Zhang X, Hou G (2020) Aryl Diammonium Iodide Passivation for Efficient and Stable Hybrid Organ-Inorganic Perovskite Solar Cells. Adv Functional Mater. https://doi.org/10.1002/adfm.20200236610.1002/adfm.202002366 ↗
43. Bi C, Zheng X, Chen B, Wei H, Huang J (2017) Spontaneous Passivation of Hybrid Perovskite by Sodium Ions from Glass Substrates: Mysterious Enhancement of Device Efficiency Revealed. ACS Energy Lett 2(6):1400–1406. https://doi.org/10.1021/acsenergylett.7b0035610.1021/acsenergylett.7b00356 ↗
44. Tang Z, Uchida S, Bessho T, Kinoshita T, Wang H, Awai F, Jono R, Maitani MM, Nakazaki J, Kubo T, Segawa H (2018) Modulations of various alkali metal cations on organometal halide perovskites and their influence on photovoltaic performance. Nano Energy 45:184–192. https://doi.org/10.1016/j.nanoen.2017.12.04710.1016/j.nanoen.2017.12.047 ↗
45. Shi D, Adinolfi V, Comin R, Yuan M, Alarousu E, Buin A, Chen Y, Hoogland S, Rothenberger A, Katsiev K, Losovyj Y, Zhang X, Dowben PA, Mohammed OF, Sargent EH, Bakr OM (2015) Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals. Science 347(6221):519–522. https://doi.org/10.1126/science.aaa272510.1126/science.aaa2725 ↗
46. Li H, Xia Y, Wang C, Wang G, Chen Y, Guo L, Luo D, Wen S (2019) High-Efficiency and Stable Perovskite Solar Cells Prepared Using Chlorobenzene/Acetonitrile Antisolvent. ACS Appl Mater Interfaces 11(38):34989–34996. https://doi.org/10.1021/acsami.9b1232310.1021/acsami.9b12323 ↗
47. Zhu K, Cong S, Lu Z, Lou Y, He L, Li J, Ding J, Yuang N, Rummeli MH, Zou G (2019) Enhanced perovskite solar cell performance via defect passivation with ethylamine alcohol chlorides additive. J Power Sources 428:82–87. https://doi.org/10.1016/j.jpowsour.2019.04.05610.1016/j.jpowsour.2019.04.056 ↗
48. Yang Z, Dou J, Kou S, Dang J, Ji Y, Yang G, Wu W-Q, Kuang D-B, Wang M (2020) Multifunctional Phosphorus-Containing Lewis Acid and Base Passivation Enabling Efficient and Moisture-Stable Perovskite Solar Cells. Adv Funct Mater. https://doi.org/10.1002/adfm.20191071010.1002/adfm.201910710 ↗