journal article·2019-02Open access

Improvement of thermoelectric properties of Ca0.9Gd0.1MnO3 by powder engineering through K2CO3 additions

N. M. Ferreira, M. C. Ferro, A. R. Sarabando, A. Ribeiro, A. Davarpanah, V. Amaral, M. A. Madre, A. V. Kovalevsky, M. A. Torres, F. M. Costa, A. Sotelo

Journal of Materials Science· Volume 54· Issue 4

Abstract

Oxide materials based on calcium manganite show clear prospects as thermoelectrics, provided by their stability at high temperatures and inherent flexibility in tuning the relevant electrical and thermal transport properties. Donor-doped CaMnO3 is an n-type semiconductor with a perovskite structure and relatively high thermoelectric performance. In this work, the precursor powders have been modified through potassium carbonate additions to produce Ca0.9Gd0.1MnO3 pellets without the usual delamination problems occurring during the compaction process. In order to demonstrate the relevant effects, several samples with different amounts of potassium carbonate (0–15 wt%) have been prepared. The results showed that potassium additions significantly facilitate the compaction procedure, while also improving the thermoelectric performances. The results also highlight the importance of porosity control for improving ZT, by decreasing the thermal conductivity without reduction of the electrical performance. The highest ZT values were observed for the samples processed at 15 wt% of potassium carbonate addition, exhibiting an improvement at least 30% at 800 °C when compared to the pure samples.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Phase Change Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Kabir R, Tian R (2015) Role of Bi doping in thermoelectric properties of CaMnO3. J Alloy Compd 628:347–35110.1016/j.jallcom.2014.12.141 ↗
2. Zhang FP, Lu QM, Zhang X, Zhang JX (2011) First principle investigation of electronic structure of CaMnO3 thermoelectric compound oxide. J Alloy Compd 509:542–545. https://doi.org/10.1016/j.jallcom.2010.09.10210.1016/j.jallcom.2010.09.102 ↗
3. Wang H, Su W, Liu J, Wang C (2016) Recent development of n-type perovskite thermoelectrics. J Materiom 2:225–236. https://doi.org/10.1016/j.jmat.2016.06.00510.1016/j.jmat.2016.06.005 ↗
4. Flahaut D, Mihara T (2006) Thermoelectrical properties of A-site substituted Ca1-xRexMnO3 system. J Appl Phys 100:84911–8491410.1063/1.2362922 ↗
5. Wang Y, Sui Y (2009) High temperature thermoelectric response of electron-doped CaMnO3. Chem Mater 21:4653–466010.1021/cm901766y ↗
6. Sotelo A, Torres M, Madre M, Diez J (2017) Effect of synthesis process on the densification, microstructure, and electrical properties of Ca0.9Yb0.1MnO3 ceramics. Int J Appl Ceram Technol 14:1190–1196. https://doi.org/10.1111/ijac.1271110.1111/ijac.12711 ↗
7. Milak PC, Minatto FD, De Noni A Jr, Montedo ORK (2015) Wear performance of alumina-based ceramics—a review of the influence of microstructure on erosive wear. Cerâmica 61:88–103. https://doi.org/10.1590/0366-6913201561357187110.1590/0366-69132015613571871 ↗
8. Mouyane M, Itaalit B, Bernard J, Houivet D, Noudem JG (2014) Flash combustion synthesis of electron doped-CaMnO3 thermoelectric oxides. Powder Technol 264:71–77. https://doi.org/10.1016/j.powtec.2014.05.02210.1016/j.powtec.2014.05.022 ↗
9. Taktaka R, Bakloutib S, Bouaziza J (2011) Effect of binders on microstructural and mechanical properties of sintered alumina. Mater Charact 62:912–91610.1016/j.matchar.2011.06.011 ↗
10. Melo Jorge ME, Correia dos Santos A, Nunes MR (2001) Effects of synthesis method on stoichiometry, structure and electrical conductivity of CaMnO3. Int J Inorg Mater 3:915–92110.1016/S1466-6049(01)00088-5 ↗
11. http://www.chemicalbook.com/ChemicalProductProperty_EN_CB4853879.htm
12. Sotelo A, Costa FM, Ferreira NM, Kovalevsky A, Ferro MC, Amaral VS, Amaral JS, Rasekh Sh, Torres MA, Madre MA, Diez JC (2016) Tailoring Ca3Co4O9 microstructure and performances using a transient liquid phase sintering additive. J Eur Ceram Soc 36:1025–1032. https://doi.org/10.1016/j.jeurceramsoc.2015.11.02410.1016/j.jeurceramsoc.2015.11.024 ↗
13. https://pubchem.ncbi.nlm.nih.gov/compound/calcium_carbonate#section=Boiling-Point . Last visit March 2018
14. Li C, Chen Q, Yan Y, Li Y, Zhao Y (2018) High-temperature thermoelectric properties of Ca0.92La0.04RE0.04MnO3 (RE = Sm, Dy and Yb) prepared by coprecipitation. Mater Res Express 5:2551010.1088/2053-1591/aaa802 ↗
15. Reimann T, Topfer J (2017) Thermoelectric properties of Gd/W double substituted calcium manganite. J Alloys Compd 699:788–79510.1016/j.jallcom.2016.12.359 ↗
16. Rosić M, Kljajević LJ, Jordanov D, Stoiljković M, Kusigerski V, Spasojević V, Matović B (2015) Effects of sintering on the structural, microstructural and magnetic properties of nanoparticle manganite Ca1-xGdxMnO3 (x = 0.05; 0.1; 0.15; 0.2). Ceram Int 41:14964–14972. https://doi.org/10.1016/j.ceramint.2015.08.04110.1016/j.ceramint.2015.08.041 ↗
17. Soleymani M, Moheb A, Joudaki E (2009) High surface area nano-sized La0.6Ca0.4MnO3 perovskite powder prepared by low temperature pyrolysis of a modified citrate gel. Eur J Chem 7(2009):809–817. https://doi.org/10.2478/s11532-009-0083-210.2478/s11532-009-0083-2 ↗
18. Noorsyakirah A, Mazlan M, Afian OM, Aswad MA, Jabir SM, Nurazilah MZ, Afiq NHM, Bakar M, Nizam AJM, Zahid OA, Bakri MHM (2016) Application of potassium carbonate as space holder for metal injection molding process of open pore copper foam. Proc Chem 19:552–557. https://doi.org/10.1016/j.proche.2016.03.05210.1016/j.proche.2016.03.052 ↗
19. Wang Y, Sui Y, Wang X, Su W, Liu X, Fan HJ (2010) Thermal conductivity of electron-doped CaMnO3 perovskites: local lattice distortions and optical phonon thermal excitation. Acta Mater 58:6306–6316. https://doi.org/10.1016/j.actamat.2010.07.05210.1016/j.actamat.2010.07.052 ↗
20. Baranovskiy A, Graff A, Klose J, Mayer J, Amouyal Y (2018) On the origin of vibrational properties of calcium manganate based thermoelectric compounds. Nano Energy. https://doi.org/10.1016/j.nanoen.2018.02.05410.1016/j.nanoen.2018.02.054 ↗
21. Sotelo A, Depriester M, Torres MA, Sahraoui AH, Madre MA, Diez JC (2018) Effect of simultaneous K, and Yb substitution for Ca on the microstructural and thermoelectric characteristics of CaMnO3 ceramics. Ceram Int. https://doi.org/10.1016/j.ceramint.2018.04.07110.1016/j.ceramint.2018.04.071 ↗
22. Noudem JG, Kenfaui D, Quetel-Weben S, Sanmathi CS, Retoux R, Gomina M (2011) Spark plasma sintering of n-Type thermoelectric Ca0.95Sm0.05MnO3. J Amer Ceram Soc. 94:2608–261210.1111/j.1551-2916.2011.04465.x ↗
23. Quetel-Weben S, Retoux R, Noudem JG (2013) Thermoelectric Ca0.9Yb0.1MnO3 − δ grain growth controlled by spark plasma sintering. J Eur Ceram Soc 33:1755–176210.1016/j.jeurceramsoc.2013.02.003 ↗
24. Kabir R, Wang D, Zhang T, Tian R, Donelson R, Tan TT, Li S (2014) Tunable thermoelectric properties of Ca0.9Yb0.1MnO3 through controlling the particle size via ball mill processing. Ceram Int 40:16701–1670610.1016/j.ceramint.2014.08.033 ↗
25. Wang H, Wang C (2012) Synthesis of Dy doped Yb0.1Ca0.9MnO3 ceramics with a high relative density and their thermoelectric properties. Mater Res Bull 47:2252–225610.1016/j.materresbull.2012.05.061 ↗
26. Zhu Y, Wang C, Wang H, Su W, Liu J, Li J (2014) Influence of Dy/Bi dual doping on thermoelectric performance of CaMnO3 ceramics. Mater Chem Phys 144:385–38910.1016/j.matchemphys.2014.01.006 ↗
27. Park JW, Kwak DH, Yoon SH, Choi SC (2009) Thermoelectric properties of Bi, Nb co-substituted CaMnO3 at high temperature. J Alloy Compd 487:550–555. https://doi.org/10.1016/j.jallcom.2009.08.01210.1016/j.jallcom.2009.08.012 ↗
28. Molinari M, Tompsett DA, Parker SC, Azoughb F, Freerb R (2014) Structural, electronic and thermoelectric behaviour of CaMnO3 and CaMnO(3-δ). J Mater Chem A 2:14109. https://doi.org/10.1039/c4ta01514b10.1039/c4ta01514b ↗