journal article·2017-09

Fabrication of CZTSSe absorbers by optimized selenization of one-step co-electrodeposited CZTS precursors

Ke Cheng, Zhongcheng Kuang, Jingling Liu, Xinsheng Liu, Ranran Jin, Zhangbo Lu, Ya Liu, Longfei Guo, Zuliang Du

Journal of Materials Science· Volume 52· Issue 18
Publisher page

Abstract

Cu2ZnSn(S,Se)4 (CZTSSe) absorber layers are fabricated by co-electrodeposited Cu–Zn–Sn–S (CZTS) precursors followed by selenization. In order to complex the Cu ions and shift its reduction potential to more negative, trisodium citrate is applied as the complexing agent during the co-electrodeposition. After the co-electrodeposition, CZTS precursors are preliminary annealed at 280 °C in order to improve the homogeneity by intermixing of the elements. The influences of selenization temperatures on the chemical compositions, crystal phases, optical properties and photovoltaic device performances are also systematically investigated by X-ray energy-dispersive spectroscopy (EDS), X-ray diffraction (XRD), Raman spectroscopy, UV–vis absorption spectroscopy, and J–V measurements. EDS results reveal that the CZTSSe absorber layers are all in a Cu-poor and Zn-rich nature, which is beneficial for fabricating cells with high efficiency. It is found that the crystalline quality and morphology of the CZTSSe absorber can be greatly improved by post-selenization at 550 °C. Photovoltaic devices are fabricated with standard soda-lime glass (SLG)/Mo/CZTSSe/CdS/i-ZnO/ITO/Ag grid structures. Champion cell demonstrates 2.81% efficiency based on the optimized CZTSSe absorber. These results validate co-electrodeposition as a promising strategy for developing earth-abundant thin film solar cells at low-cost.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Miskin CK, Yang WC, Hages CJ, Carter NJ, Joglekar CS, Stach EA, Agrawal R (2015) 9.0% efficient Cu2ZnSn (S,Se)4 solar cells from selenized nanoparticle inks. Prog Photovolt Res Appl 23:654–65910.1002/pip.2472 ↗
2. Chen SY, Walsh A, Gong XG, Wei SH (2013) Classification of lattice defects in the kesterite Cu2ZnSnS4 and Cu2 ZnSnSe4 earth-abundant solar cell absorbers. Adv Mater 25:1522–153910.1002/adma.201203146 ↗
3. Liu XL, Feng Y, Cui HT, Liu FY, Hao XJ, Conibeer G, Mitzi DB, Green M (2016) The current status and future prospects of kesterite solar cells: a brief review. Prog Photovolt Res Appl 24:879–89810.1002/pip.2741 ↗
4. Kim J, Hiroi H, Todorov TK, Gunawan O, Kuwahara M, Gokmen T, Nair D, Hopstaken M, Shin B, Lee YS, Wang W, Sugimoto H, Mitzi DB (2014) High efficiency Cu2ZnSn(S,Se)4 solar cells by applying a double In2S3/CdS emitter. Adv Mater 26:7427–743110.1002/adma.201402373 ↗
5. Repins I, Beall C, Vora N, Dehart C, Kuciauskas D, Dippo P, To B, Mann J, Hsu W, Goodrich A, Noufi R (2012) Co-evaporated Cu2ZnSnSe4 films and devices. Sol Energy Mater Sol Cell 101:154–15910.1016/j.solmat.2012.01.008 ↗
6. Yang F, Ma RX, Zhao WS, Zhang XY, Li X (2016) Fabrication of Cu2ZnSnS4 (CZTS) absorber films based on different compound targets. J Alloys compd 689:849–85610.1016/j.jallcom.2016.08.053 ↗
7. Agawane GL, Kamble AS, Vanalakar SA, Shin SW, Gang MG, Yun JH, Gwak J, Moholkar AV, Kim JH (2015) Fabrication of 3.01% power conversion efficient high-quality CZTS thin film solar cells by a green and simple sol–gel technique. Mater Lett 158:58–6110.1016/j.matlet.2015.05.036 ↗
8. Wang W, Shen HL, Wong LH, Yao HY, Su ZH, Li YF (2016) Preparation of high efficiency Cu2ZnSn(S,Se)4 solar cells from novel no-toxic hybrid ink. J Power Sources 335:84–9010.1016/j.jpowsour.2016.10.036 ↗
9. Seo SW, Jeon J, Seo JW, Yu YY, Jeong J, Lee D, Kim H, Ko MJ, Son HJ, Jang HW, Kim JY (2016) Compositional and interfacial modification of Cu2ZnSn(S,Se)4 thin-film solar cells prepared by electrochemical deposition. Chemsuschem 9:439–44410.1002/cssc.201501256 ↗
10. Tsai HW, Chen CW, Thomas SR, Hsu CH, Tsai WC, Chen YZ, Wang YC, Wang ZM, Hong HF, Chueh YL (2016) Facile growth of Cu2ZnSnS4 thin-film by one-step pulsed hybrid electrophoretic and electroplating deposition. Sci Rep 6:19102–1910810.1038/srep19102 ↗
11. Ge J, Chu JH, Jiang JC, Yan YY, Yang PX (2015) The interfacial reaction at ITO back contact in Kesterite CZTSSe bifacial solar cells. ACS Sustain Chem Eng 3:3043–305210.1021/acssuschemeng.5b00962 ↗
12. Vauche L, Risch L, Sánchez Y, Dimitrievska M, Pasquinelli M, Monsabert TG, Grand P, Jaime-Ferrer S, Saucedo E (2016) 8.2% pure selenide kesterite thin-film solar cells from large-area electrodeposited precursors. Prog Photovolt Res Appl 24:38–5110.1002/pip.2643 ↗
13. Yao LY, Ao JP, Jeng MJ, Bi JL, Gao SS, Sun GZ, He Q, Zhou ZQ, Sun Y, Chang LB (2017) A CZTSe solar cell with 8.2% power conversion efficiency fabricated using electrodeposited Cu/Sn/Zn precursor and a three-step selenization process at low Se pressure. Sol Energy Mater Sol Cells 159:318–32410.1016/j.solmat.2016.09.028 ↗
14. Yuan TF, Li Y, Jia M, Lai YQ, Li J, Liu FY, Liu YX (2015) Fabrication of Cu2ZnSnS4 thin film solar cells by sulfurization of electrodeposited stacked binary Cu–Zn and Cu–Sn alloy layers. Mater Lett 155:44–4710.1016/j.matlet.2015.04.101 ↗
15. Tang AY, Liu JJ, Ji J, Dou ML, Li ZL, Wang F (2016) One-step electrodeposition for targeted off-stoichiometry Cu2ZnSnS4 thin films. Appl Surf Sci 383:253–26010.1016/j.apsusc.2016.04.189 ↗
16. Shiyani T, Raval D, Patel M, Mukhopadhyay I, Ray A (2016) Effect of initial bath condition and post-annealing on co-electrodeposition of Cu2ZnSnS4. Mater Chem Phys 171:63–7210.1016/j.matchemphys.2015.11.001 ↗
17. Gurav KV, Shin SW, Patil UM, Suryawanshi MP, Pawar SM, Gang MG, Vanalkar SA, Yun JH, Kim JH (2015) Improvement in the properties of CZTSSe thin films by selenizing single-step electrodeposited CZTS thin films. J Alloys compd 631:178–18210.1016/j.jallcom.2014.12.253 ↗
18. Tao JH, Liu JF, Chen LL, Cao HY, Meng XK, Zhang YB, Zhang CJ, Sun L, Yang PX, Chu JH (2016) 7.1% efficient co-electroplated Cu2ZnSnS4 thin film solar cells with sputtered CdS buffer layers. Green Chem 18:550–55710.1039/C5GC02057C ↗
19. Shin S, Park C, Kim C, Kim Y, Park S, Lee J (2016) Cyclic voltammetry studies of copper, tin and zinc electrodeposition in a citrate complex system for CZTS solar cell application. Curr Appl Phys 16:207–21010.1016/j.cap.2015.11.017 ↗
20. Cheng K, Meng J, Wang XY, Huang YQ, Liu JJ, Xue M, Du ZL (2015) Low-cost Cu2ZnSnS4 thin films prepared from single step electrodeposited Cu/Zn/Sn alloy precursor films. Mater Chem Phys 163:24–2910.1016/j.matchemphys.2015.06.026 ↗
21. Yang KJ, Son D, Sung S, Sim J, Kim Y, Park S, Jeon D, Kim J, Hwang D, Jeon C, Nam D, Cheong H, Kang J, Kim A (2016) A band-gap-graded CZTSSe solar cell with 12.3% efficiency. J Mater Chem A 4:10151–1015810.1039/C6TA01558A ↗
22. Johnson M, Baryshev SV, Thimsen E, Manno M, Zhang X, Veryovkim IV, Leighton C, Aydil ES (2014) Alkali-metal-enhanced grain growth in Cu2ZnSnS4 thin films. Energy Environ Sci 7:1931–193810.1039/C3EE44130J ↗
23. Hsieh Y, Han QF, Jiang CY, Song T, Chen HJ, Meng L, Zhou HP, Yang Y (2016) Efficiency enhancement of Cu2ZnSn(S,Se)4 solar cells via alkali metals doping. Adv Energy Mater 6:150238610.1002/aenm.201502386 ↗
24. Juskenas R, Niaura G, Mockus Z, Kanapeckaite S, Giraitis R, Kondrotas R, Naujokaitis A, Stalnionis G, Pakstas V, Karpaviciene V (2016) XRD studies of an electrochemically co-deposited Cu–Zn–Sn precursor and formation of a Cu2ZnSnSe4 absorber for thin-film solar cells. J Alloys compd 655:281–28910.1016/j.jallcom.2015.09.186 ↗
25. Lee JH, Choi HJ, Kim WM, Jeong JH, Park JK (2016) Effect of pre-annealing on the phase formation and efficiency of CZTS solar cell prepared by sulfurization of Zn/(Cu, Sn) precursor with H2S gas. Sol Energy 136:499–50410.1016/j.solener.2016.07.031 ↗
26. Pinto AH, Shin SW, Aydil ES, Penn RL (2016) Selective removal of Cu2−x(S,Se) phases from Cu2ZnSn(S,Se)4 thin films. Green Chem 18:5814–582110.1039/C6GC01287F ↗
27. Just J, Sutter-Fella CM, Lutzenkirchen-Hecht D, Frahm R, Schorr S, Unold T (2016) Secondary phases and their influence on the composition of the kesterite phase in CZTS and CZTSe thin films. Phys Chem Chem Phys 18:15988–1599410.1039/C6CP00178E ↗
28. Levcenko S, Just J, Redinger A, Larramona G, Bourdais S, Dennler G, Jacob A, Unold T (2016) Deep defects in Cu2ZnSn(S,Se)4 solar cells with varying Se content. Phys Rev Appl 5:02400410.1103/PhysRevApplied.5.024004 ↗
29. Azimi H, Hou Y, Brabec CJ (2014) Towards low-cost, environmentally friendly printed chalcopyrite and kesterite solar cells. Energy Environ Sci 7:1829–184910.1039/C3EE43865A ↗
30. Mkawi EM, Ibrahim K, Ali MKM, Farrukh MA, Mohamed AS (2014) Influence of triangle wave pulse on the properties of Cu2ZnSnS4 thin films prepared by single step electrodeposition. Sol Energy Mater Sol Cells 130:91–9810.1016/j.solmat.2014.06.039 ↗
31. Li JJ, Wang HX, Wu L, Chen C, Zhou ZQ, Liu FF, Sun Y, Han JB, Zhang Y (2016) Growth of Cu2ZnSnSe4 film under controllable Se vapor composition and impact of low Cu content on solar cell efficiency. ACS Appl Mater Interfaces 8:10283–1029210.1021/acsami.6b00081 ↗
32. Kumar M, Dubey A, Adhikari N, Venkatesan S, Qiao QQ (2015) Strategic review of secondary phases, defects and defect-complexes in kesterite CZTS-Se solar cells. Energy Environ Sci 8:3134–315910.1039/C5EE02153G ↗
33. Vanalakar SA, Mali SS, Agwane GL, Kamble A, Kim IY, Patil PS, Kim JY, Kim JH (2016) Influence of laser repetition rate on the Cu2ZnSn(SSe)4 thin films synthesized via pulsed laser deposition technique. Sol Energy Mater Sol Cells 157:331–33610.1016/j.solmat.2016.05.063 ↗
34. Fernandes PA, Salome PMP, Dacunha AF (2011) Study of polycrystalline Cu2ZnSnS4 films by Raman scattering. J Alloys compd 509:7600–760610.1016/j.jallcom.2011.04.097 ↗
35. Tai KF, Gunawan O, Kuwahara M, Chen S, Mhaisalkar SG, Huan CHA, Mitzi DB (2016) Fill factor loss in Cu2ZnSn(SxSe1−x)4 solar cells: insights from physical and electrical characterization of device and exfoliated films. Adv Energy Mater 6:1501609–150161010.1002/aenm.201501609 ↗