journal article·2005-09

Ferroelectric properties of barium titanate thin films grown on nichrome substrates by RF sputtering

A. MÁRQUEZ-HERRERA, A. ZAPATA-NAVARRO, MA. DE LA PAZ CRUZ-JÁUREGUI

Journal of Materials Science· Volume 40· Issue 18
Publisher page

Abstract

Ferroelectric thin films have attracted attention because of their possible applications in new microelectronic devices. In particular, the BaTiO3 thin films, a material with a high dielectric constant, low leakage current and the quality of the change of its ferroelectric properties by adding and modifying the concentration of a doppand [1], can be used for a wide range of functional purposes, from simple capacitors to complicated microwave devices [2–6]. BaTiO3 films have been grown by many deposition techniques [1, 4,7, 8] but RF sputtering is known to be one of the best because it preserves the stoichiometry under the right deposition conditions. A major disadvantage of BaTiO3 is that it possesses a mechanical fragility, therefore, one of the main technological challenges for this material is to find an electrode-substrate that could offer mechanical stability. Also, this electrode-substrate must have a good thermal stability, low electrical resistance, high resistance to oxidation and good adherence for the film. Pt/TiO2/SiO2/Si is commonly used because it posseses the mentioned characteristics [2]. Nevertheless, it has many problems because titanium can migrate to the platinum surface during the annealing process, adding electrical resistively to electrode [9–12]. It also generates cracking in by thermal stress in the BaTiO3 thin films. The nichrome is suggested for a suitable electrode because it fulfills the requirements mentioned above [13–17] and, in contrast to Pt/TiO2/SiO2/Si, its commercial availability and its low price. Therefore, in this work, BaTiO3 films were grown on nichrome substrates by RF-sputtering, and their structural and ferroelectric properties were measured and improved in comparison with those deposited on Pt/TiO2/SiO2/Si substrates using the same method and under same deposition conditions. BaTiO3 thin films on nichrome substrates were prepared by RF magnetron sputtering in an off-axis geometry at room temperature. A 50.8 mm diameter. BaTiO3 target, 99.9% pure, from SCI Engineered Materials, Inc., was used. The nichrome was obtained from a commercial strip, nichrome 80, with 0.127 mm thickness from H. Cross Company, Inc. The films were also grown over Pt/TiO2/SiO2/Si substrates in order to com-
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Acoustic Wave Resonator Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. P. Pasierb, S. Komornicki and M. Radecka, Thin Solid Films 324 (1998) 134.10.1016/S0040-6090(98)00355-1 ↗
2. G. A. Hirata, L. L. López and J. M. Siqueiros, Sup. y Vac. 9 (1999) 147.
3. L. Shi-jian, X. Chong-yang, Z. Xiang-bin, S. Ji-qun and Z. Bo-fang, Phys. Stat. Sol.(A) 194(1) (2002) 64.10.1002/1521-396X(200211)194:1<64::AID-PSSA64>3.0.CO;2-1 ↗
4. V. Ruckenbauer, F. F. Hau, S. G. Lu, K. M. Yeung, C. L. Mak and K. H. Wong, Appl. Phys. A 78 (2004) 1049.10.1007/s00339-003-2154-0 ↗
5. S. W. Kirchoefer, J. M. Pond, A. C. Carter, W. Chang, K. K. Agarwal, J. S. Horwitz and D. B. Chrisey, Micr. Opt. Tech. Lett. 18(3) (1998) 169.
6. V. N. Keis, A. B. Kozyrev, M. L. Khazov, J. Sok and J. S. Lee, Elect. Lett., 34(11) (1998) 3.
7. J. G. Cheng, J. Tang, J. H. Chu and A. J. Zhang, Appl. Phys. Lett 77 (2000) 1035.10.1063/1.1289038 ↗
8. R. E. Somekh, J. Vac. Sci. Technol. A 2 (1984) 1285.10.1116/1.572396 ↗
9. K. SREENIVAS, I. REANEY, T. MAEDER and N. SETTER, J. Appl. Phys. 75(1) (1994) 232.10.1063/1.355889 ↗
10. W. J. LEE, Y. M. KIM and H. G. KIM, Thin Solid Films 269 (1995) 75.10.1016/0040-6090(95)06755-8 ↗
11. S. T. KIM, H. H. KIM, M. Y. LEE and W. J. LEE, Jpn. J. Appl. Phys 1A 36 (1997) 294.10.1143/JJAP.36.294 ↗
12. M. P. Cruz, J. M. Siqueiros, J. Valenzuela, R. Machorro, J. Portelles and A. Fundora, Ferroelectrics 225 (1999) 319.10.1080/00150199908009141 ↗
13. A. E. Gershinskii, G. V. Timofeeva and N. A. Shalygina, Thin Solid Films 162 (1998) 171.10.1016/0040-6090(88)90205-2 ↗
14. I. H. Kazi, P. M. Wild, T. N. Moor and M. Sayer, Thin Solid Films 433 (2003) 337.10.1016/S0040-6090(03)00390-0 ↗
15. M. A. ANGADI and R. WHITING, Mats Sci. and Eng. B. 7 (1990) l.10.1016/0921-5107(90)90020-C ↗
16. P. Kayser, J. C. Godefroy and L. Leca, Sens. Actuators A, 37–38 (1993) 328.10.1016/0924-4247(93)80055-L ↗
17. J. Zhou, T. R. Ohno and C. A. Wolden, J. Vac. Sci. Tech. A 21 (2003) 3.
18. S. B. Desu, Mater. Res. Soc. Symp. Proc. 200 (1990) 199.10.1557/PROC-200-199 ↗
19. H. N. AL-SHAREEF, D. DIMOS, M. V. RAYMOND, R. W. SCHWARTZ and C. H. MUELLER, J. Elect. 1, 2 (1997) 145.
20. H. Z. Jin, J. Zhu, P. Ehrhart, F. Fitsilis, C. L. Jia, S. Regnery, K. Urban and R. Waser, Thin Solid Films 429 (2003) 282.10.1016/S0040-6090(02)01330-5 ↗
21. H. N. Al-Shareef,D. Dimos, W. L. Warren and B. A. Tuttle, Integr. Ferroelectr. 15(1–4) (1997) 53.10.1080/10584589708015696 ↗
22. Y. Xu, Ferroelectric Materials and Their Applications. (Amsterdam: Elsevier Science Publishers, 1991) p. 151.
23. W. Moo-Chin,H. Fu-Yuan, H. Chi-Shiung and W. Nan-Chung, J. Cryst. Grow. 246 (2002) 78.10.1016/S0022-0248(02)01694-9 ↗
24. S. U. Adikary, H. L. Chan, Thin Solid Films 424 (2003) 70.10.1016/S0040-6090(02)00918-5 ↗
25. R. A. Zárate, A. L. Cabrera, U. G. Volkmann and V. Fuenzalida, J. Phys. Chem. Solids 59(9) (1998) 1639.10.1016/S0022-3697(98)00008-0 ↗
26. R. Thomas, D. C. Dude, M. N. Kamalasanan and S. Chanda, Thin Solid Films 346 (1999) 212.10.1016/S0040-6090(98)01772-6 ↗
27. H. B. Sharma and N. K. Sarma, Thin Solid Films 330 (1998) 178.10.1016/S0040-6090(98)00551-3 ↗
28. P. C. Joshi and S. B. Desu, Thin Solid Films 300 (1997) 289.10.1016/S0040-6090(96)09468-0 ↗