Control of the structure, morphology and dielectric properties of bismuth titanate ceramics by praseodymium substitution using an intermediate fuel agent-assisted self-combustion synthesis
Source abstract
Abstract
The volatilization of bismuth (Bi) species and bismuth oxide (Bi2O3) leads to the presence of the oxygen vacancies (V O 00 ) and consequently restrains the properties of bismuth titanate (BIT; Bi4Ti3O12). This report presents the incorporation of different atomic ratios of praseodymium ion (Pr3+: x = 0, 0.2, 0.4, 0.6, 0.8 and 1.0) into the BIT (Bi4−x Pr x Ti3O12) ceramics through an intermediate fuel agent-assisted self-combustion synthesis (IFSC). X-ray diffraction and Raman spectroscopy results revealed that some of bismuth ion (Bi3+) in the pseudo-perovskite layer containing Ti–O octahedra was substituted by Pr3+ ion. The substitution by ion with a smaller ionic radius caused the structure distortion and consequently resulted in the phase transformation from an orthorhombic symmetry to a tetragonal symmetry. Besides, it suppressed the volatilization of Bi and Bi2O3 and increased the stability of metal–oxygen octahedra in the BIT. These play a crucial role to control the crystal growth, as well as limit the V O 00 . Dense ceramic with a relative density up to 96.2% was obtained by incorporating Pr3+ with atomic ratio of 1.0. It exhibited high dielectric constant as 908.19 and low dissipation factor as 0.0011. The results address the possibility to control the structure, morphology and dielectric properties of BIT ceramic by incorporating Pr3+ ion through IFSC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Dielectric properties of ceramics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Yueming L, Wen C, Qing X, Jing Z (2007) Ceram Int 33:9510.1016/j.ceramint.2005.08.001 ↗
2. Hyatt NC, Hriljac JA, Comyn TP (2003) Mater Res Bull 38:83710.1016/S0025-5408(03)00032-1 ↗
3. Subbarao EC (1961) Phys Rev 122:80410.1103/PhysRev.122.804 ↗
4. Hou J, Kumar RV, Qu Y, Krsmanovic D (2009) J Nanopart Res 12:56310.1007/s11051-009-9624-z ↗
5. Villegas M, Jardiel T, Caballero AC (2009) J Eur Ceram Soc 29:73710.1016/j.jeurceramsoc.2008.06.026 ↗
6. Lazarevic ZZ, Romcevic NZ, Bobic JD, Romcevic MJ, Dohcevic-Mitrovic Z, Stojanvic BD (2009) J Alloys Compd 486:84810.1016/j.jallcom.2009.07.079 ↗
7. Lazarevic ZZ, Stojanvic BD, Paiva-Santos CO, Romcevic NZ (2008) Ferroelectric 368:15410.1080/00150190802368339 ↗
8. Tang Q-Y, Kan Y-M, Li Y-G, Zhang G-J, Wang P-L (2006) Sci Mater 54:207510.1016/j.scriptamat.2006.03.008 ↗
9. Simoes AZ, Quinelato C, Ries A, Stojanovic BD, Longo E, Varela JA (2006) Mater Chem Phys 98:48110.1016/j.matchemphys.2005.09.070 ↗
10. Takahashi M, Noguchi Y, Miyayama M (2005) J Ceram Process Res 6:281
11. Yoneda Y, Kohara S, Mizuki J (2006) J Appl Phys 45:755610.1143/JJAP.45.7556 ↗
12. Park BH, Kang BS, Bu SD, Noh TW, Lee J, Jo W (1999) Nature 401:68210.1038/44352 ↗
13. Yamada M, Iizawa N, Yamaguchi T, Sakamoto W, Kikuta K, Yogo T, Hayashi T, Hirano S-I (2003) Jpn J Appl Phys 42:522210.1143/JJAP.42.5222 ↗
14. Cheng CP, Tang MH, Ye Z, Zhong XL, Zheng XJ, Zhou YC, Hu ZS (2007) Mater Lett 61:356310.1016/j.matlet.2006.11.116 ↗
15. Chen Y-C (2006) Thin Solid Films 513:33110.1016/j.tsf.2006.02.016 ↗
16. Kim JK, Kim J, Song TW, Kim SS (2002) Thin Solid Films 419:22510.1016/S0040-6090(02)00550-3 ↗
17. Goh PY, Razak KA, Sreekantan S (2009) J Alloys Compd 475:75810.1016/j.jallcom.2008.07.129 ↗
18. Krengvirat W, Sreekantan S, Ahmad-Fauzi MN, Matsuda A, Chinwanitcharoen C (2012) J Ceram Soc Jpn 120:110.2109/jcersj2.120.1 ↗
19. Achary SN, Patwe SJ, Krishna PSR, Shinde AB, Tyagi AK (2008) J Phys 71:935
20. Kim JS, Lee SY, Lee HJ, Ahn CW, Kim WI, Jang MS (2008) J Electroceram 21:63310.1007/s10832-007-9278-0 ↗
21. Simoes AZ, Stojanovic BD, Ramirez MA, Cavalheiro AA, Longo E, Varela JA (2008) Ceram Int 34:25710.1016/j.ceramint.2006.09.019 ↗
22. Moore JJ, Yi HC (1990) J Mater Sci 25:1159. doi: 10.1007/BF0058542110.1007/BF00585421 ↗
23. Du X, Xu Y, Ma H, Wang J, Li X (2007) J Am Ceram Soc 90:138210.1111/j.1551-2916.2007.01548.x ↗
24. Wang X-H, Chen R-Z, Gui Z-L, Li LT (2003) Mater Sci Eng B 99:19910.1016/S0921-5107(02)00520-2 ↗
25. Wang YH, Huang CP, Zhu YY (2006) Solid State Commun 138:22910.1016/j.ssc.2006.03.006 ↗
26. Du YL, Zhang MS, Chen Q, Yuan ZR, Yin V, Zhang QA (2002) Solid State Commun 124:11310.1016/S0038-1098(02)00493-3 ↗
27. Wang Y, Xu G, Zhang X, Tang W, Cheng G, Zhu Y (2004) Mater Lett 58:81310.1016/j.matlet.2003.07.018 ↗
28. Oliveira RC, Cavalcante LS, Sczancoski JC, Aguiar EC, Espinosa JWM, Varela JA, Pizani PS, Longo E (2009) J Alloys Compd 478:66110.1016/j.jallcom.2008.11.115 ↗
29. Luo S, Tang Z, Yao W, Zhang Z (2003) Microelectron Eng 66:14710.1016/S0167-9317(03)00039-X ↗
30. Ng CY, Razak KA (2011) J Alloys Compd 509:94210.1016/j.jallcom.2010.09.136 ↗
31. Razak KA, Cheah JY, Sreekantan S (2011) J Alloys Compd 509:293610.1016/j.jallcom.2010.11.163 ↗
32. Krengvirat W, Sreekantan S, Ahmad-Fauzi MN, Chinwanitcharoen C, Hiroyuki M, Atsunori M (2011) J Ceram Int. doi: 10.1016/j.ceramint.2011.11.08110.1016/j.ceramint.2011.11.081 ↗
33. Hervoches CH, Lightfoot P (1991) Chem Mater 11:335910.1021/cm991090d ↗
34. Zarycka A, Lisinska-Czekaj A, Czuber J, Orkisz T, Ilczuk J, Czekaj D (2005) Mater Sci-Pol 23:167
35. Graves PR, Hua G, Myhra S, Thompson JG (1995) J Solid State Chem 114:11210.1006/jssc.1995.1017 ↗
36. Ling ZC, Xia HR, Liu WL, Han H, Wang XQ, Sun SQ, Ran DG, Yu LL (2006) Mater Sci Eng B 128:15610.1016/j.mseb.2005.11.033 ↗
37. Zhou D, Gu H, Hu Y, Qian Z, Hu Z, Yang K, Zou T, Wang Z, Guan J, Chen W (2010) J Appl Phys 107:094105-1, 094105-3–094105-610.1063/1.3407563 ↗
38. Watcharapasorn A, Siriprapa P, Jiansirisomboon S (2009) J Eur Ceram Soc 30:8710.1016/j.jeurceramsoc.2009.07.031 ↗
39. Chon U, Shim JS (2003) J Appl Phys 93:476910.1063/1.1561585 ↗
40. Buessem WR, Cross LE, Goswami AK (1996) J Am Ceram Soc 49:3310.1111/j.1151-2916.1966.tb13144.x ↗
41. Arlt G (1989) Ferroelectrics 91:310.1080/00150198908015725 ↗
42. Kong LB, Ma J, Zhu W, Tan OK (2001) Mater Lett 51:10810.1016/S0167-577X(01)00274-9 ↗
43. Coondoo I, Jha AK, Agarwal SK (2007) Ceram Int 33:4110.1016/j.ceramint.2005.07.013 ↗
44. Simoes AZ, Pianno RF, Riccardi CS, Cavalcante LS, Longo E, Varela JA (2008) Ceram Int 454:66
45. Takahashi M, Noguchi Y, Miyayama M (2005) Ceram Process Res 6:281
46. Gachigi KW, Kumar U, Dougherty JP (2002) ISAF ‘92, Proc Eighth IEEE Int Symp Appl 492–495