journal article·2009-09

Water-based sol–gel nanocrystalline barium titanate: controlling the crystal structure and phase transformation by Ba:Ti atomic ratio

Mohammad Reza Mohammadi, A. Esmaeili Rad, D. J. Fray

Journal of Materials Science· Volume 44· Issue 18
Publisher page

Abstract

Highly stable, water-based barium titanate (BaTiO3) sols were developed by a low cost and straightforward sol–gel process. Nanocrystalline barium titanate thin films and powders with various Ba:Ti atomic ratios were produced from the aqueous sols. The prepared sols had a narrow particle size distribution in the range 21–23 nm and they were stable over 5 months. X-ray diffraction pattern revealed that powders contained mixture of hexagonal- or perovskite-BaTiO3 as well as a trace of Ba2Ti13O22 and Ba4Ti2O27 phases, depending on annealing temperature and Ba:Ti atomic ratio. Highly pure barium titanate with cubic perovskite structure achieved with Ba:Ti = 50:50 atomic ratio at the high temperature of 800 °C, whereas pure barium titanate with hexagonal structure obtained for the same atomic ratio at the low temperature of 500 °C. Transmission electron microscope revealed that the crystallite size of both hexagonal- and perovskite-BaTiO3 phases reduced with increasing the Ba:Ti atomic ratio, being in the range 2–3 nm. Scanning electron microscope analysis revealed that the average grain size of barium titanate thin films decreased with an increase in the Ba:Ti atomic ratio, being in the range 28–35 nm. Moreover, based on atomic force microscope images, BaTiO3 thin films had a columnar-like morphology with high roughness. One of the highest specific surface area reported in the literature was obtained for annealed powders at 550 °C in the range 257–353 m2g−1.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Kim YI, Jung JK, Ryu KS (2004) Mater Res Bull 39:104510.1016/j.materresbull.2004.03.001 ↗
2. Hu MZC, Payzant VKEA, Rawn CJ, Hunt RD (2000) Powder Technol 110:210.1016/S0032-5910(99)00262-4 ↗
3. Kwei GH, Lawson AC, Billinge SJL (1993) J Phys Chem 97:236810.1021/j100112a043 ↗
4. Kwon SW, Yoon DH (2007) J Eur Ceram Soc 27:24710.1016/j.jeurceramsoc.2006.02.031 ↗
5. Kwon SW, Yoon DH (2007) Ceram Int 33:135710.1016/j.ceramint.2006.05.008 ↗
6. Yen FS, Hasing HL, Chang YH (1995) Jpn J Appl Phys 34:614910.1143/JJAP.34.6149 ↗
7. Ihlefeld JF, Borland WJ, Maria JP (2008) J Mater Sci 43:4264. doi: 10.1007/s10853-008-2618-x10.1007/s10853-008-2618-x ↗
8. Yaseen H, Baltianski S, Tsur Y (2007) J Mater Sci 42:9679. doi: 10.1007/s10853-007-1944-810.1007/s10853-007-1944-8 ↗
9. Hung KM, Hsieh CS, Yang WD, Sun YJ (2007) J Mater Sci 42:2376. doi: 10.1007/s10853-006-1452-210.1007/s10853-006-1452-2 ↗
10. Wang L, Liu L, Xue D, Kang H, Liu C (2007) J Alloys Compd 440:7810.1016/j.jallcom.2006.09.023 ↗
11. Ischenko V, Pippel E, Ko¨ferstein R, Abicht HP, Woltersdorf J (2007) Solid State Sci 9:2110.1016/j.solidstatesciences.2006.09.004 ↗
12. Baeten F, Derks B, Coppens W, van Kleef E (2006) J Eur Ceram Soc 26:58910.1016/j.jeurceramsoc.2005.06.029 ↗
13. Jhung SH, Lee JH, Yoon JW, Hwang YK, Hwang JS, Park SE, Chang JS (2004) Mater Lett 58:316110.1016/j.matlet.2004.06.006 ↗
14. Zhang S, Jiang F, Qu G, Lin C (2008) Mater Lett 62:222510.1016/j.matlet.2007.11.055 ↗
15. Harizanov O, Harizanova A, Ivanova I (2004) Mater Sci Eng B106:19110.1016/j.mseb.2003.09.014 ↗
16. Novak Z, Knez Z, Ban I, Drofenik M (2001) J Supercrit Fluids 19:20910.1016/S0896-8446(00)00090-5 ↗
17. Matsuda H, Kobayashi N, Kobayashi T, Miyazawa K, Kuwabara M (2000) J Non-Cryst Solids 271:16210.1016/S0022-3093(00)00101-0 ↗
18. Kumazawa H, Masuda K (1999) Thin Solid Films 353:14410.1016/S0040-6090(99)00427-7 ↗
19. Cheung MC, Chan HLW, Zhou QF, Choy CL (1991) Nanostruct Mater 11:83710.1016/S0965-9773(99)00374-8 ↗
20. Tangwiwat S, Milne SJ (2005) J Non-Cryst Solids 351:97610.1016/j.jnoncrysol.2004.12.008 ↗
21. Fujihara S, Schneller T, Waser R (2004) Appl Surf Sci 221:17810.1016/S0169-4332(03)00869-9 ↗
22. Lee B, Zhang J (2001) Thin Solid Films 388:10710.1016/S0040-6090(01)00816-1 ↗
23. Lide DR (2007) Handbook of chemistry and physics, 87th edn. CRC Press, Ohio, p 4
24. Guo W, Datye AK, Ward TL (2005) J Mater Chem 15:47010.1039/b413140a ↗
25. Mohammadi MR, Cordero-Cabrera MC, Ghorbani M, Fray DJ (2006) J Sol–Gel Sci Technol 40:1510.1007/s10971-006-8267-0 ↗
26. Mohammadi MR, Cordero-Cabrera MC, Fray DJ, Ghorbani M (2006) Sens Actuators B: Chem 120:8610.1016/j.snb.2006.01.046 ↗
27. Kishi A, Toraya H (2004) Rigaku J 21:25
28. Cullity BD (1978) Elements of X-ray diffraction. Addison-Wesley Publishing Company, Inc., London, p 99
29. Liu X, Yang J, Wang L, Yang X, Lu L, Wang X (2000) Mater Sci Eng A 289:24110.1016/S0921-5093(00)00901-1 ↗
30. Ivanova T, Harizanova A, Surtchev M (2002) Mater Lett 55:32710.1016/S0167-577X(02)00387-7 ↗
31. Socrates G (1994) Infrared characteristic group frequencies: tables and charts. Wiley, England, p 6 (62 and 237)
32. Cho WS (1998) J Phys Chem Solids 59:65910.1016/S0022-3697(97)00227-8 ↗
33. Takaoka GH, Hamamo T, Fukushima K, Matsuo J, Yamada I (1997) Nucl Instr Meth Phys Res B 121:50310.1016/S0168-583X(96)00397-7 ↗
34. Mohammadi MR, Fray DJ (2007) Acta Mater 55:445510.1016/j.actamat.2007.04.011 ↗
35. Dicken MJ, Diest K, Park YB, Atwater HA (2007) J Cryst Growth 300:33010.1016/j.jcrysgro.2006.11.313 ↗
36. Canulescu S, Dinescu G, Epurescu G, Matei DG, Grigoriu C, Craciun F, Verardi P, Dinescu M (2004) Mater Sci Eng B 109:16010.1016/j.mseb.2003.10.103 ↗
37. Webb PA, Orr C (1997) Analytical methods in fine particle technology. Micromeritics Instrument Corporation, USA, p 55