journal article·2001-10

Preparation and characterization of Ce-doped BaTiO3 thin films by r.f. sputtering

M. Cernea, I. Matei, A. Iuga, C. Logofatu

Journal of Materials Science· Volume 36· Issue 20
Publisher page

Abstract

Ce-doped BaTiO3 thin films prepared on silicon-platinium by r.f. sputtering has been investigated. BaTiO3 doped with 5.5 mol%CeO2 thin film was deposited at 550°C substrate temperature in an Ar atmosfere. The crystal structure and shape were examined by X-ray diffraction and scanning electron microscopy with EDAX. Analysis by X-ray diffraction patterns show that the crystalline film with a cubic structure of BaTiO3, was obtained. The surface morphology (roughness, the grain size and the droplet size) of the thin film surface was examined by atomic force microscopy (AFM). The grain size is about 160 nm, the droplet size is about 0.675 μm and the roughness is 36.88 nm. EDAX analysis established a composition of the film to be identical with that of the target (BaTiO3 doped with 5.5 mol%CeO2). The broad peak in the capacitance versus temperature curve at the Curie point indicate that the r.f. sputtered Ce-doped BaTiO3 film is ferroelectric. The values of the capacitance of the thin film at 1 KHz were found to be 86 pF and the loss dielectric was tan δ = 0.0875. The film exibits a dielectric anomaly peak at 23°C showing ferroelectric to paraelectric phase transition.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Acoustic Wave Resonator Technologies · Photorefractive and Nonlinear Optics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. P. J. Harrop and D. S. Campbell, Thin Solid Films 2 (1968) 273.10.1016/0040-6090(68)90034-5 ↗
2. F. T. Wooten, Proc.IEEE 55 (1967) 564.10.1109/PROC.1967.5590 ↗
3. R. S. Muller and J. Conragan, IEEE Trans.Electron. Devices ED-12 (1965) 590.10.1109/T-ED.1965.15614 ↗
4. J. R. Fiebiger and R. S. Muller, J.Appl.Phys. 38 (1967) 1948.10.1063/1.1709788 ↗
5. A. B. Kaufman, IEEE Trans.Electron.Devices ED-16 (1969) 562.10.1109/T-ED.1969.16800 ↗
6. N. F. Borelli and M. M. Layton, ibid. ED-16 (1969) 511.10.1109/T-ED.1969.16790 ↗
7. G. W. Taylor, ibid. ED-16 (1969) 565.10.1109/T-ED.1969.16801 ↗
8. K. Fujimoto, Y. Kobayashi and K. Kubota, Thin Solid Films 169 (1989) 249.10.1016/0040-6090(89)90708-6 ↗
9. T. Nagamoto, T. Kosaka, S. Omari and O. Omoto, Ferroelectrics 9 (1971) 91.
10. C. A. T. Salama and E. Siciunas, J.Vac.Sci.Technol. 9 (1971) 91.10.1116/1.1316695 ↗
11. O. X. Jia, Z. Q. Shi and W. A. Anderson, Thin Solid Films 209 (1992) 2230.
12. J. H. Kim and S. Hishita, J.Mater.Sci. 30 (1995) 4645.10.1007/BF01153074 ↗
13. K. Uchino, N. Lee, T. Toba, N. Usuki, H. Aburatani and Y. Yto, J.Ceram.Soc.Jpn. 100 (1992) 1091.10.2109/jcersj.100.1091 ↗
14. W. S. Clabaugh, E. M. Swiggard and R. Gilchrist, J.Res.Natl.Bur.Std. 56(5) (1956) 289, RP 2677.10.6028/jres.056.037 ↗
15. K. Kudaka, K. Ilzumi and K. Sasaki, Am.Ceram.Soc. Bull. 61 (1982) 1236.
16. T.-T. Fang and H. B. Lin, J.Amer.Ceram.Soc. 72(10) (1989) 1899.10.1111/j.1151-2916.1989.tb05998.x ↗
17. T.-T. Fang, H. B. Lin and J. B. Hwang, J.Mater.Sci. Lett. 9 (1990) 688.10.1007/BF00721804 ↗
18. Idem. J.Amer.Ceram.Soc. 73(11) (1990) 3363.10.1111/j.1151-2916.1990.tb06462.x ↗
19. Fu-Su Yen, Chen T. Chang and Yen-Hwei Chang, ibid. 73(11) (1990) 3422.10.1111/j.1151-2916.1990.tb06470.x ↗
20. T. Tunkasiri and G. Rujijanagul, J.Mater.Sci.Lett. 13 (1994) 165.10.1007/BF00278150 ↗
21. K. Uchino, E. Sadanaga and T. Hirose, J.Amer.Ceram. Soc. 72 (1989) 1555.10.1111/j.1151-2916.1989.tb07706.x ↗
22. Y. Ijima, Japan J.Appl.Phys. 24 (1985) 401.10.7567/JJAPS.24S2.401 ↗
23. T. Kawano, T. Sei and T. Tsuchia, J.Mater.Sci. 31 (1991) 2178.