Negative temperature coefficient thermistor based on BaFe x Sn1−x O3−ε solid solutions
Source abstract
Abstract
A negative temperature coefficient (NTC) thermistors based on BaFe x Sn1−x O3−e were fabricated by conventional solid-state reaction method. The microstructure and electrical properties of the NTC thermistors were characterized by X-ray diffraction (XRD), electric (R(T)), and impedance measurements. The XRD analysis shows that the BaFe x Sn1−x O3−e still remains cubic perovskite structure and the crystal growth orientation changes at higher Fe content. Similarly, the electric measurements indicates that all the samples show typical NTCR behavior; with increasing Fe content, the room temperature resistivity, activation energy, and thermistor constant decrease, are in the range of 2.52–217 KΩ cm, 0.343–0.43 eV, and 3900–4896 K, respectively. The impedance spectroscopy confirms that the observed ac resistance, consisting of the grain bulks, grain boundaries, and electrode–ceramic interface, mainly attributes to the grain boundaries and grain bulks; with the rise in temperature the grain boundary resistance shows more rapid change than the grain resistance; moreover, the Fe concentration can greatly affect the grain and grain boundary resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrical and Thermal Properties of Materials · Ferroelectric and Piezoelectric Materials · Dielectric properties of ceramics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Vakiv M, Shpotyuk O, Mrooz O, Hadzaman I (2001) J Eur Ceram Soc 21:178310.1016/S0955-2219(01)00115-7 ↗
2. Feltz A (2000) J Eur Ceram Soc 20:236710.1016/S0955-2219(00)00149-7 ↗
3. Kumar A, Singh BP, Choudhary RNP, Thakur AK (2006) Mater Chem Phys 99:15010.1016/j.matchemphys.2005.09.086 ↗
4. Kumar A, Singh BP, Choudhary RNP, Thakur AK (2005) Mater Lett 59:188010.1016/j.matlet.2005.02.004 ↗
5. Prakash O, Kumar D (2000) J Mater Sci Mater Electron 12:165
6. Prakash O, Kumar D, Shrivastava KK, Dwivedi RK (2001) J Mater Sci 36:5805. doi: 10.1023/A:101290402150110.1023/A:1012904021501 ↗
7. Hadjarab B, Bouguelia A, Benchettara A, Trari M (2008) J Alloys Compd 461:36010.1016/j.jallcom.2007.06.091 ↗
8. Lu W, Jiang S, Zhou D, Gong S (2000) Sens Actuators 80:3510.1016/S0924-4247(99)00291-5 ↗
9. Zhu X, Wang H, Yang W (2006) Solid State Ionics 177:291710.1016/j.ssi.2006.08.027 ↗
10. Smyth DM (1991) Ferroelectrics 116:11710.1080/00150199108007935 ↗
11. Marinova V, Sainov V, Lin SH, Hsu KY (2002) J Appl Phys 41:186010.1143/JJAP.41.1860 ↗
12. Macklen ED (1979) Thermistors. Electrochemical Publications Ltd, Ayr, Scotland, p 33
13. Gutierrez D, Peña O, Duran P, Moure C (2002) J Eur Ceram Soc 22:56710.1016/S0955-2219(01)00302-8 ↗
14. Kharton VV, Shaula AL, Snijkers FMM, Cooymans JFC, Luyten JJ, Marozau IP, Viskup AP, Marques FMB, Frade JR (2006) J Eur Ceram Soc 26:369510.1016/j.jeurceramsoc.2005.10.013 ↗
15. Cole KS, Cole RH (1941) J Chem Phys 9:34110.1063/1.1750906 ↗
16. Sinclair DC, West AR (1989) J Appl Phys 66:385010.1063/1.344049 ↗
17. Abram EJ, Sinclair DC, West AR (2001) J Electroceram 7:17910.1023/A:1014435112280 ↗
18. Heinen B, Waser R (1998) J Mater Sci 33:4603. doi: 10.1023/A:100443322470410.1023/A:1004433224704 ↗
19. Gerhardt R (1994) J Phys Chem Solids 55:149110.1016/0022-3697(94)90575-4 ↗
20. Liu J, Duan CG, Mei WN, Smith RW, Hardy JR (2005) J Appl Phys 98:09370310.1063/1.2125117 ↗
21. Prasad NV, Narendra Babu S, Siddeshwar A, Prasad G, Kumar GS (2009) Ceram Int 35:105710.1016/j.ceramint.2008.04.019 ↗
22. Barik SK, Choudhary RNP, Mahapatra PK (2008) J Mater Sci Mater Electron 19:60710.1007/s10854-007-9397-z ↗