journal article·2016-02

Synthesis and characterization of CuInS2 nanocrystalline semiconductor prepared by high-energy milling

Erika Dutková, María J. Sayagués, Jaroslav Briančin, Anna Zorkovská, Zdenka Bujňáková, Jaroslav Kováč, Jaroslav Kováč, Peter Baláž, Jana Ficeriová

Journal of Materials Science· Volume 51· Issue 4
Publisher page

Abstract

Nanocrystalline CuInS particles have been synthesized from copper, indium, and sulfur powders by high-energy milling in a planetary mill in an argon atmosphere. Structural characterization of the prepared nanoparticles, including phase identification, Raman spectroscopy, specific surface area measurement, and particle size analysis were performed. The optical properties were studied using UV–Vis absorption and photoluminescence (PL) spectroscopy. The production of CuInS (JCPDS 027-0159) particles with a crystallite size of about 17.5–23.5 nm was confirmed by X-ray diffraction. The crystal structure has a tetragonal body-centered symmetry belonging to the I-42d space group. The Raman spectra also proved the formation of pure CuInS nanoparticles. TEM and HRTEM measurements revealed the presence of nanoparticles of different dimensions (10–20 nm) and their tendency to form agglomerates. The nanoparticles tend to agglomerate due to their large specific surface area. The average size of the synthesized particles was determined by photon cross-correlation spectroscopy to be in the range of 330–530 nm (bimodal size distribution). The band gap of the CuInS particles is 2 eV which is wider than that in bulk materials. The decrease in size leads to the blue-shift of the PL spectra. Therefore, CuInS nanoparticles are promising candidates for optical applications, and they have high potential in solar energy conversion.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Green MA, Emery K, King DL, Igari S, Warta W (2002) Solar cell efficiency tables (version 20). Prog Photovolt 10(5):355–360. doi: 10.1002/Pip.45310.1002/pip.453 ↗
2. Pinjari DV, Pandit AB (2010) Cavitation milling of natural cellulose to nanofibrils. Ultrason Sonochem 17(5):845–852. doi: 10.1016/j.ultsonch.2010.03.00510.1016/j.ultsonch.2010.03.005 ↗
3. Klenk R, Klaer J, Scheer R, Lux-Steiner MC, Luck I, Meyer N, Ruhle U (2005) Solar cells based on CuInS2—an overview. Thin Solid Films 480:509–514. doi: 10.1016/j.tsf.2004.11.04210.1016/j.tsf.2004.11.042 ↗
4. Kazmerski L, Ramanathan K (2005) The 14th international conference on ternary and multinary compounds. J Phys Chem Solids 66(11):1853. doi: 10.1016/j.jpcs.2005.10.17110.1016/j.jpcs.2005.10.171 ↗
5. Xiao JP, Xie Y, Tang R, Qian YT (2001) Synthesis and characterization of ternary CuInS2 nanorods via a hydrothermal route. J Solid State Chem 161(2):179–183. doi: 10.1006/jssc.2001.924710.1006/jssc.2001.9247 ↗
6. Zhou JC, Li SW, Gong XL, Yang YL, Guo Y (2011) Preparation of CuInS2 microspheres via a facile solution-chemical method. Mater Lett 65(12):2001–2003. doi: 10.1016/j.matlet.2011.03.08910.1016/j.matlet.2011.03.089 ↗
7. Kim KH, Lee JK, Alphonse A, Erkan ME, Shin DC, Lim DG, Park BO, Jin MHC (2013) Preparation of precursor particles by cryogenic mechanical milling for the deposition of CuInS2 thin films. Mater Sci Semicond Process 16(1):226–230. doi: 10.1016/j.mssp.2012.08.01210.1016/j.mssp.2012.08.012 ↗
8. Amiri O, Salavati-Niasari M, Sabet M, Ghanbari D (2013) Synthesis and characterization of CuInS2 microsphere under controlled reaction conditions and its application in low-cost solar cells. Mater Sci Semicond Process 16(6):1485–1494. doi: 10.1016/j.mssp.2013.04.02610.1016/j.mssp.2013.04.026 ↗
9. Li DS, Zou Y, Yang DR (2012) Controlled synthesis of luminescent CuInS2 nanocrystals and their optical properties. J Lumin 132(2):313–317. doi: 10.1016/j.jlumin.2011.08.03010.1016/j.jlumin.2011.08.030 ↗
10. Scheer R, Klenk R, Klaer J, Luck I (2004) CuInS2 based thin film photovoltaics. Sol Energy 77(6):777–784. doi: 10.1016/j.solener.2004.08.00410.1016/j.solener.2004.08.004 ↗
11. Long F, Wang WM, Tao HC, Jia TK, Li XM, Zou ZG, Fu ZY (2010) Solvothermal synthesis, nanocrystal print and photoelectrochemical properties of CuInS2 thin film. Mater Lett 64(2):195–198. doi: 10.1016/j.matlet.2009.10.04410.1016/j.matlet.2009.10.044 ↗
12. Han SK, Kong MG, Guo Y, Wang MT (2009) Synthesis of copper indium sulfide nanoparticles by solvothermal method. Mater Lett 63(13–14):1192–1194. doi: 10.1016/j.matlet.2009.02.03210.1016/j.matlet.2009.02.032 ↗
13. Lee DY, Kim J (2010) Characterization of sprayed CuInS2 films by XRD and Raman spectroscopy measurements. Thin Solid Films 518(22):6537–6541. doi: 10.1016/j.tsf.2010.03.06210.1016/j.tsf.2010.03.062 ↗
14. Zhang JJ, Li Q, Chen J (2014) Synthesis and characterization of chalcopyrite CuInS2 nanorods by an organic molten salt method. Mater Lett 120:182–184. doi: 10.1016/j.matlet.2014.01.07910.1016/j.matlet.2014.01.079 ↗
15. Hu HM, Yang BJ, Liu XY, Zhang R, Qian YT (2004) Large-scale growth of porous CuInS2 microspheres. Inorg Chem Commun 7(4):563–565. doi: 10.1016/j.inoche.2004.02.01910.1016/j.inoche.2004.02.019 ↗
16. Jiang Y, Qu Y, Yuan SW, Xie B, Zhang SY, Qian YT (2001) Preparation and characterization of CuInS2 nanorods and nanotubes from an elemental solvothermal reaction. J Mater Res 16(10):2805–2809. doi: 10.1557/Jmr.2001.038610.1557/JMR.2001.0386 ↗
17. Shen GZCD, Tang KB, Fang Z, Sheng J, Qian YT (2003) Polyol-mediated synthesis of porous nanocrystalline CuInS2 foam. J Cryst Growth 254:7510.1016/S0022-0248(03)01142-4 ↗
18. Shi L, Yin PQ, Wang LB, Qian YT (2012) Fabrication of single-crystalline CuInS2 nanowires array via a diethylenetriamine-thermal route. CrystEngComm 14(21):7217–7221. doi: 10.1039/C2ce25368b10.1039/c2ce25368b ↗
19. Baláž P (2008) Mechanochemistry in nanoscience and minerals engineering. Springer, Heidelberg
20. Baláž P, Achimovičová M, Baláž M, Billik P, Cherkezova-Zheleva Z, Criado JM, Delogu F, Dutková E, Gaffet E, Gotor FJ, Kumar R, Mitov I, Rojac T, Senna M, Streletskii A, Wieczorek-Ciurowa K (2013) Hallmarks of mechanochemistry: from nanoparticles to technology. Chem Soc Rev 42(18):7571–7637. doi: 10.1039/C3cs35468g10.1039/c3cs35468g ↗
21. Gorai S, Bhattacharya S, Liarokapis E, Lampakis D, Chaudhuri S (2005) Morphology controlled solvothermal synthesis of copper indium sulphide powder and its characterization. Mater Lett 59(28):3535–3538. doi: 10.1016/j.matlet.2005.06.02310.1016/j.matlet.2005.06.023 ↗
22. Nadica D, Abazovič DJJ, Stoiljkovič Milovan M, Mitrič Miodrag N, Ahrenkiel Scott P, Nedeljkovič Jovan M, Čomor Mirjana I (2012) Colloidal chemistry-based synthesis of quantized CuInS2/Se2 nanoparticles. J Serb Chem Soc 77(6):789–79710.2298/JSC110420220A ↗
23. He JJ, Zhou WH, Li M, Hou ZL, Du YF, Wu SX (2012) One-pot route for preparation of monodisperse CuInS2 nanocrystals. Mater Lett 66(1):96–98. doi: 10.1016/j.matlet.2011.08.01310.1016/j.matlet.2011.08.013 ↗
24. Katsuhiro Nose NF, Omata Takahisa, Otsuka-Yao-Matsuo Shinya, Wataru Kato MU, Nakamura Hiroyuki, Maeda Hideaki, Hayato Kamioka AHH (2009) Photoluminescence of CuInS2-based semiconductor quantum dots; Its origin and the effect of ZnS coating. J Phys 165:012028
25. Landsberg PT (1991) Recombination in semiconductors. Cambridge University Press, Cambridge