DataVXJournal of Materials SciencePaper
journal article·2024-10

Exploring the impact of halide composition on stability and power conversion efficiency in all-inorganic perovskite solar cells

Lipiar K. M. O. Goni, Rahim Abdur, Mosharof Hossain, Shahariar Chowdhury, M. Shahinuzzaman, Md. Aftab Ali Shaikh, Mohammad Shah Jamal

Journal of Materials Science· Volume 59· Issue 39
Publisher page
Bibliographic record

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

Electronic materials

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Solid-state spectroscopy and crystallography

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Tai Q, Tang KC, Yan F (2019) Recent progress of inorganic perovskite solar cells. Energy Environ Sci 12:2375–240510.1039/C9EE01479A ↗
2. Xie Z, Chen D, Zhai J et al (2023) Charge separation via synergy of homojunction and electrocatalyst in BiVO4 for photoelectrochemical water splitting. Appl Catal B Environ 334:122865. https://doi.org/10.1016/j.apcatb.2023.12286510.1016/j.apcatb.2023.122865 ↗
3. Chen Y, Li X, Yang H, Huang Y (2024) Systematic constructing FeOCl/BiVO 4 hetero-interfacial hybrid photoanodes for efficient photoelectrochemical water splitting. Small. https://doi.org/10.1002/smll.20240240610.1002/smll.202402406 ↗
4. Wang Y, Huang J, Chen Y et al (2024) Modulating built-in electric field via Bi-VO4-Fe interfacial bridges to enhance charge separation for efficient photoelectrochemical water splitting. J Colloid Interface Sci 672:12–20. https://doi.org/10.1016/j.jcis.2024.05.21810.1016/j.jcis.2024.05.218 ↗
5. Ma T, Wang S, Zhang Y et al (2020) The development of all-inorganic CsPbX3 perovskite solar cells. J Mater Sci 55:464–479. https://doi.org/10.1007/s10853-019-03974-y10.1007/s10853-019-03974-y ↗
6. Andreani LC, Bozzola A, Kowalczewski P et al (2019) Silicon solar cells: toward the efficiency limits. Adv Phys X 4:1548305. https://doi.org/10.1080/23746149.2018.154830510.1080/23746149.2018.1548305 ↗
7. Kojima A, Teshima K, Shirai Y, Miyasaka T (2009) Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. J Am Chem Soc 131:6050–6051. https://doi.org/10.1021/ja809598r10.1021/ja809598r ↗
8. Fu Q, Jen AKY (2023) Perovskite solar cell developments, whatʼs next? Next Energy 1:100004. https://doi.org/10.1016/j.nxener.2023.10000410.1016/j.nxener.2023.100004 ↗
9. Yi Z, Ladi NH, Shai X et al (2019) Will organic-inorganic hybrid halide lead perovskites be eliminated from optoelectronic applications? Nanoscale Adv 1:1276–1289. https://doi.org/10.1039/C8NA00416A10.1039/C8NA00416A ↗
10. Xiang W, Tress W (2019) Review on recent progress of all-inorganic metal halide perovskites and solar cells. Adv Mater 31:1902851. https://doi.org/10.1002/adma.20190285110.1002/adma.201902851 ↗
11. Stoumpos CC, Malliakas CD, Kanatzidis MG (2013) Semiconducting tin and lead iodide perovskites with organic cations: phase transitions, high mobilities, and near-infrared photoluminescent properties. Inorg Chem 52:9019–9038. https://doi.org/10.1021/ic401215x10.1021/ic401215x ↗
12. Im JH, Jang IH, Pellet N et al (2014) Growth of CH3 NH3 PbI3 cuboids with controlled size for high-efficiency perovskite solar cells. Nat Nanotechnol 9:927–932. https://doi.org/10.1038/nnano.2014.18110.1038/nnano.2014.181 ↗
13. Shi D, Adinolfi V, Comin R et al (2015) Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals. Science 347:519–522. https://doi.org/10.1126/science.aaa272510.1126/science.aaa2725 ↗
14. D’Innocenzo V, Grancini G, Alcocer MJP et al (2014) Excitons versus free charges in organo-lead tri-halide perovskites. Nat Commun 5:3586. https://doi.org/10.1038/ncomms458610.1038/ncomms4586 ↗
15. Miyata K, Meggiolaro D, Tuan Trinh M et al (2017) Large polarons in lead halide perovskites. Sci Adv 3(8):e1701217. https://doi.org/10.1126/sciadv.170121710.1126/sciadv.1701217 ↗
16. Wang Z, Cheng T, Wang F et al (2016) Morphology engineering for high-performance and multicolored perovskite light-emitting diodes with simple device structures. Small 12:4412–4420. https://doi.org/10.1002/smll.20160178510.1002/smll.201601785 ↗
17. Xing G, Mathews N, Lim SS et al (2014) Low-temperature solution-processed wavelength-tunable perovskites for lasing. Nat Mater 13:476–480. https://doi.org/10.1038/nmat391110.1038/nmat3911 ↗
18. Tan Z-K, Moghaddam RS, Lai ML et al (2014) Bright light-emitting diodes based on organometal halide perovskite. Nat Nanotechnol 9:687–692. https://doi.org/10.1038/nnano.2014.14910.1038/nnano.2014.149 ↗
19. Jena AK, Kulkarni A, Miyasaka T (2019) Halide perovskite photovoltaics: background, status, and future prospects. Chem Rev 119:3036–3103. https://doi.org/10.1021/acs.chemrev.8b0053910.1021/acs.chemrev.8b00539 ↗
20. Ansari MIH, Qurashi A, Nazeeruddin MK (2018) Frontiers, opportunities, and challenges in perovskite solar cells: a critical review. J Photochem Photobiol C Photochem Rev 35:1–24. https://doi.org/10.1016/j.jphotochemrev.2017.11.00210.1016/j.jphotochemrev.2017.11.002 ↗
21. Meng L, You J, Yang Y (2018) Addressing the stability issue of perovskite solar cells for commercial applications. Nat Commun 9:5265. https://doi.org/10.1038/s41467-018-07255-110.1038/s41467-018-07255-1 ↗
22. Juarez-Perez EJ, Ono LK, Maeda M et al (2018) Photodecomposition and thermal decomposition in methylammonium halide lead perovskites and inferred design principles to increase photovoltaic device stability. J Mater Chem A 6:9604–9612. https://doi.org/10.1039/C8TA03501F10.1039/C8TA03501F ↗
23. Xu S, Yang L, Zhang X et al (2024) Research progress of Cs-based all-inorganic perovskite solar cells. Energies 17:2671. https://doi.org/10.3390/en1711267110.3390/en17112671 ↗
24. Yuan S, yu, Zhao H, Wang Y tong, et al (2023) Research status of all-inorganic perovskite solar cells: a review. J Solid State Chem 328:124299. https://doi.org/10.1016/j.jssc.2023.12429910.1016/j.jssc.2023.124299 ↗
25. Sharikadze S (2022) Cesium based all inorganic perovskite solar cells. Iowa State University, Ames10.31274/td-20240329-129 ↗
26. Shen C, Ye T, Yang P, Chen G (2024) All-Inorganic Perovskite Solar Cells: Defect Regulation and Emerging Applications in Extreme Environments. Adv Mater 36(25):2401498. https://doi.org/10.1002/adma.20240149810.1002/adma.202401498 ↗
27. Li X, Sun Q, Xie Y, Fung M (2024) All-inorganic perovskite solar cells: modification strategies and challenges. Adv Energy Sustain Res 5(6):2300263. https://doi.org/10.1002/aesr.20230026310.1002/aesr.202300263 ↗
28. Duan J, Xu H, Sha WEII et al (2019) Inorganic perovskite solar cells: an emerging member of the photovoltaic community. J Mater Chem A 7:21036–21068. https://doi.org/10.1039/C9TA06674H10.1039/C9TA06674H ↗
29. Chen H, Xiang S, Li W et al (2018) Inorganic perovskite solar cells: a rapidly growing field. Sol RRL 2:1700188. https://doi.org/10.1002/solr.20170018810.1002/solr.201700188 ↗
30. Lee HJ, Heo JH, Im SH (2024) Interfacial modification strategies to secure phase-stability for inorganic perovskite solar cells. Appl Phys Rev. https://doi.org/10.1063/5.020233210.1063/5.0202332 ↗
31. Li C, Lu X, Ding W et al (2008) Formability of ABX 3 ( X = F, Cl, Br, I) halide perovskites. Acta Crystallogr Sect B Struct Sci 64:702–707. https://doi.org/10.1107/S010876810803273410.1107/S0108768108032734 ↗
32. Kim H-SS, Im SH, Park N-GG (2014) Organolead halide perovskite: new horizons in solar cell research. J Phys Chem C 118:5615–5625. https://doi.org/10.1021/jp409025w10.1021/jp409025w ↗
33. Xiao Z, Song Z, Yan Y (2019) From lead halide perovskites to lead-free metal halide perovskites and perovskite derivatives. Adv Mater 31:1803792. https://doi.org/10.1002/adma.20180379210.1002/adma.201803792 ↗
34. Marinova N, Valero S, Delgado JL (2017) Organic and perovskite solar cells: Working principles, materials and interfaces. J Colloid Interface Sci 488:373–389. https://doi.org/10.1016/j.jcis.2016.11.02110.1016/j.jcis.2016.11.021 ↗
35. Eperon GE, Paternò GM, Sutton RJ et al (2015) Inorganic caesium lead iodide perovskite solar cells. J Mater Chem A 3:19688–19695. https://doi.org/10.1039/C5TA06398A10.1039/C5TA06398A ↗
36. Dastidar S, Egger DA, Tan LZ et al (2016) High chloride doping levels stabilize the perovskite phase of cesium lead iodide. Nano Lett 16:3563–3570. https://doi.org/10.1021/acs.nanolett.6b0063510.1021/acs.nanolett.6b00635 ↗
37. Choi H, Jeong J, Kim H-B et al (2014) Cesium-doped methylammonium lead iodide perovskite light absorber for hybrid solar cells. Nano Energy 7:80–85. https://doi.org/10.1016/j.nanoen.2014.04.01710.1016/j.nanoen.2014.04.017 ↗
38. Heo JH, Han HJ, Kim D et al (2015) Hysteresis-less inverted CH 3 NH 3 PbI 3 planar perovskite hybrid solar cells with 18.1% power conversion efficiency. Energy Environ Sci 8:1602–1608. https://doi.org/10.1039/C5EE00120J10.1039/C5EE00120J ↗
39. Marronnier A, Roma G, Boyer-Richard S et al (2018) Anharmonicity and disorder in the black phases of cesium lead iodide used for stable inorganic perovskite solar cells. ACS Nano 12:3477–3486. https://doi.org/10.1021/acsnano.8b0026710.1021/acsnano.8b00267 ↗
40. Sutton RJ, Filip MR, Haghighirad AA et al (2018) Cubic or orthorhombic? revealing the crystal structure of metastable black-phase CsPbI 3 by theory and experiment. ACS Energy Lett 3:1787–1794. https://doi.org/10.1021/acsenergylett.8b0067210.1021/acsenergylett.8b00672 ↗
41. Fu Y, Rea MT, Chen J et al (2017) Selective stabilization and photophysical properties of metastable perovskite polymorphs of CsPbI 3 in thin films. Chem Mater 29:8385–8394. https://doi.org/10.1021/acs.chemmater.7b0294810.1021/acs.chemmater.7b02948 ↗
42. Wang K, Jin Z, Liang L et al (2018) All-inorganic cesium lead iodide perovskite solar cells with stabilized efficiency beyond 15%. Nat Commun 9:4544. https://doi.org/10.1038/s41467-018-06915-610.1038/s41467-018-06915-6 ↗
43. Wang Q, Zheng X, Deng Y et al (2017) Stabilizing the α-phase of CsPbI3 perovskite by sulfobetaine zwitterions in one-step spin-coating films. Joule 1:371–382. https://doi.org/10.1016/j.joule.2017.07.01710.1016/j.joule.2017.07.017 ↗
44. Chang X, Fang J, Fan Y et al (2020) Printable CsPbI 3 perovskite solar cells with PCE of 19% via an additive strategy. Adv Mater 32:2001243. https://doi.org/10.1002/adma.20200124310.1002/adma.202001243 ↗
45. Wang P, Zhang X, Zhou Y et al (2018) Solvent-controlled growth of inorganic perovskite films in dry environment for efficient and stable solar cells. Nat Commun 9:2225. https://doi.org/10.1038/s41467-018-04636-410.1038/s41467-018-04636-4 ↗
46. Luo P, Xia W, Zhou S et al (2016) Solvent engineering for ambient-air-processed, phase-stable CsPbI3 in perovskite solar cells. J Phys Chem Lett 7:3603–3608. https://doi.org/10.1021/acs.jpclett.6b0157610.1021/acs.jpclett.6b01576 ↗
47. Somma F, Nikl M, Nitsch K et al (2000) Growth, structure and optics of CsI-PbI2 co-evaporated thin films. Thin Solid Films 373:195–198. https://doi.org/10.1016/S0040-6090(00)01133-010.1016/S0040-6090(00)01133-0 ↗
48. Yunakova ON, Miloslavskii VK, Kovalenko EN, Kovalenko VV (2014) Influence of impurities on the absorption spectrum of thin Cs4Pbl6 films. Funct Mater 21(3):313–317. https://doi.org/10.15407/fm21.03.31310.15407/fm21.03.313 ↗
49. Ripolles TS, Nishinaka K, Ogomi Y et al (2016) Efficiency enhancement by changing perovskite crystal phase and adding a charge extraction interlayer in organic amine free-perovskite solar cells based on cesium. Sol Energy Mater Sol Cells 144:532–536. https://doi.org/10.1016/j.solmat.2015.09.04110.1016/j.solmat.2015.09.041 ↗
50. Docampo P, Ball JM, Darwich M et al (2013) Efficient organometal trihalide perovskite planar-heterojunction solar cells on flexible polymer substrates. Nat Commun 4:2761. https://doi.org/10.1038/ncomms376110.1038/ncomms3761 ↗
51. Jeon NJ, Noh JH, Kim YC et al (2014) Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells. Nat Mater 13:897–903. https://doi.org/10.1038/nmat401410.1038/nmat4014 ↗
52. Liu M, Johnston MB, Snaith HJ (2013) Efficient planar heterojunction perovskite solar cells by vapour deposition. Nature 501:395–398. https://doi.org/10.1038/nature1250910.1038/nature12509 ↗
53. Frolova LA, Anokhin DV, Piryazev AA et al (2017) Highly efficient all-inorganic planar heterojunction perovskite solar cells produced by thermal coevaporation of CsI and PbI 2. J Phys Chem Lett 8:67–72. https://doi.org/10.1021/acs.jpclett.6b0259410.1021/acs.jpclett.6b02594 ↗
54. Yonezawa K, Yamamoto K, Shahiduzzaman M et al (2017) Annealing effects on CsPbI 3 -based planar heterojunction perovskite solar cells formed by vacuum deposition method. Jpn J Appl Phys 56(4S):04CS11. https://doi.org/10.7567/JJAP.56.04CS1110.7567/JJAP.56.04CS11 ↗
55. Hu Y, Zhang S, Shu T et al (2018) Highly efficient flexible solar cells based on a room-temperature processed inorganic perovskite. J Mater Chem A 6:20365–20373. https://doi.org/10.1039/C8TA06719H10.1039/C8TA06719H ↗
56. Chen C-YY, Lin H-WWH-YY, Chiang K-MM et al (2017) All-vacuum-deposited stoichiometrically balanced inorganic cesium lead halide perovskite solar cells with stabilized efficiency exceeding 11%. Adv Mater 29:1605290. https://doi.org/10.1002/adma.20160529010.1002/adma.201605290 ↗
57. Wang Y, Ibrahim Dar M, Ono LK et al (2019) Thermodynamically stabilized b-CsPbI3–based perovskite solar cells with efficiencies >18%. Science 365:591–595. https://doi.org/10.1126/science.aav868010.1126/science.aav8680 ↗
58. Zheng X, Chen B, Dai J et al (2017) Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations. Nat Energy 2:17102. https://doi.org/10.1038/nenergy.2017.10210.1038/nenergy.2017.102 ↗
59. Haruyama J, Sodeyama K, Han L, Tateyama Y (2015) First-principles study of ion diffusion in perovskite solar cell sensitizers. J Am Chem Soc 137:10048–10051. https://doi.org/10.1021/jacs.5b0361510.1021/jacs.5b03615 ↗
60. Yun JS, Seidel J, Kim J et al (2016) Critical role of grain boundaries for ion migration in formamidinium and methylammonium lead halide perovskite solar cells. Adv Energy Mater 6:1600330. https://doi.org/10.1002/aenm.20160033010.1002/aenm.201600330 ↗
61. Luo D, Su R, Zhang W et al (2020) Minimizing non-radiative recombination losses in perovskite solar cells. Nat Rev Mater 5:44–60. https://doi.org/10.1038/s41578-019-0151-y10.1038/s41578-019-0151-y ↗
62. Chen R, Hui Y, Wu B et al (2020) Moisture-tolerant and high-quality α-CsPbI 3 films for efficient and stable perovskite solar modules. J Mater Chem A 8:9597–9606. https://doi.org/10.1039/D0TA01968B10.1039/D0TA01968B ↗
63. Liao J-F, Rao H-S, Chen B-X et al (2017) Dimension engineering on cesium lead iodide for efficient and stable perovskite solar cells. J Mater Chem A 5:2066–2072. https://doi.org/10.1039/C6TA09582H10.1039/C6TA09582H ↗
64. Li Z, Yang M, Park J-S et al (2016) Stabilizing perovskite structures by tuning tolerance factor: formation of formamidinium and cesium lead iodide solid-state alloys. Chem Mater 28:284–292. https://doi.org/10.1021/acs.chemmater.5b0410710.1021/acs.chemmater.5b04107 ↗
65. Lee J-W, Kim D-H, Kim H-S et al (2015) Formamidinium and cesium hybridization for photo- and moisture-stable perovskite solar cell. Adv Energy Mater 5:1501310. https://doi.org/10.1002/aenm.20150131010.1002/aenm.201501310 ↗
66. Liang J, Zhao P, Wang C et al (2017) CsPb0.9Sn0.1IBr 2 based all-inorganic perovskite solar cells with exceptional efficiency and stability. J Am Chem Soc 139:14009–14012. https://doi.org/10.1021/jacs.7b0794910.1021/jacs.7b07949 ↗
67. Swarnkar A, Marshall AR, Sanehira EM et al (2016) Quantum dot-induced phase stabilization of α-CsPbI3 perovskite for high-efficiency photovoltaics. Science 354:92–95. https://doi.org/10.1126/science.aag270010.1126/science.aag2700 ↗
68. Xiang S, Yang S, Chen H et al (2019) Natrium doping pushes the efficiency of carbon- based CsPbI 3 perovskite solar cells to 10. 7 % natrium doping pushes the efficiency of carbon-based CsPbI 3 perovskite solar cells to 10. 7 %. Iscience 15:156–164. https://doi.org/10.1016/j.isci.2019.04.02510.1016/j.isci.2019.04.025 ↗
69. Hu Y, Bai F, Liu X et al (2017) Bismuth incorporation stabilized α-CsPbI 3 for fully inorganic perovskite solar cells. ACS Energy Lett 2:2219–2227. https://doi.org/10.1021/acsenergylett.7b0050810.1021/acsenergylett.7b00508 ↗
70. Yao Z, Zhao W, Chen S et al (2020) Mn doping of CsPbI3Film towards high-efficiency solar cell. ACS Appl Energy Mater 3:5190–5197. https://doi.org/10.1021/acsaem.9b0246810.1021/acsaem.9b02468 ↗
71. Boles MA, Ling D, Hyeon T, Talapin DV (2016) Erratum: the surface science of nanocrystals. Nat Mater 15:364–364. https://doi.org/10.1038/nmat457810.1038/nmat4578 ↗
72. Balazs DM, Bijlsma KI, Fang H-H et al (2017) Stoichiometric control of the density of states in PbS colloidal quantum dot solids. Sci Adv 3(9):eaao1558. https://doi.org/10.1126/sciadv.aao155810.1126/sciadv.aao1558 ↗
73. Polman A, Knight M, Garnett EC et al (2016) Photovoltaic materials: present efficiencies and future challenges. Science 352(6283):aad4424. https://doi.org/10.1126/science.aad442410.1126/science.aad4424 ↗
74. Sanehira EM, Marshall AR, Christians JA et al (2017) Enhanced mobility CsPbI 3 quantum dot arrays for record-efficiency, high-voltage photovoltaic cells. Sci Adv 3(10):eaao4204. https://doi.org/10.1126/sciadv.aao420410.1126/sciadv.aao4204 ↗
75. Xiong L, Qin M, Chen C et al (2018) Fully high-temperature-processed SnO 2 as blocking layer and scaffold for efficient, stable, and hysteresis-free mesoporous perovskite solar cells. Adv Funct Mater 28:1706276. https://doi.org/10.1002/adfm.20170627610.1002/adfm.201706276 ↗
76. Chen K, Jin W, Zhang Y et al (2020) High efficiency mesoscopic solar cells using CsPbI 3 perovskite quantum dots enabled by chemical interface engineering. J Am Chem Soc 142:3775–3783. https://doi.org/10.1021/jacs.9b1070010.1021/jacs.9b10700 ↗
77. Li F, Zhou S, Yuan J et al (2019) perovskite quantum dot solar cells with 15.6% efficiency and improved stability enabled by an α-CsPbI 3 /FAPbI 3 bilayer structure. ACS Energy Lett 4:2571–2578. https://doi.org/10.1021/acsenergylett.9b0192010.1021/acsenergylett.9b01920 ↗
78. Yu B, Shi J, Tan S et al (2021) Efficient (>20 %) and stable all-inorganic cesium lead triiodide solar cell enabled by thiocyanate molten salts. Angew Chemie - Int Ed 60:13436–13443. https://doi.org/10.1002/anie.20210246610.1002/anie.202102466 ↗
79. Liu T, Zhang J, Qin M et al (2021) Modifying surface termination of CsPbI 3 grain boundaries by 2D perovskite layer for efficient and stable photovoltaics. Adv Funct Mater 31:2009515. https://doi.org/10.1002/adfm.20200951510.1002/adfm.202009515 ↗
80. Liu T, Zhang J, Wu X et al (2020) Interfacial modification through a multifunctional molecule for inorganic perovskite solar cells with over 18% efficiency. Sol RRL 4:2000205. https://doi.org/10.1002/solr.20200020510.1002/solr.202000205 ↗
81. Wang K, Tian Q, Zhao G et al (2020) Beach-chair-shaped energy band alignment for high-performance β-CsPbI3 solar cells. Cell Reports Phys Sci 1:100180. https://doi.org/10.1016/j.xcrp.2020.10018010.1016/j.xcrp.2020.100180 ↗
82. Ge J, Li W, He X et al (2020) Hybrid CdSe/CsPbI 3 quantum dots for interface engineering in perovskite solar cells. Sustain Energy Fuels 4:1837–1843. https://doi.org/10.1039/C9SE01205B10.1039/C9SE01205B ↗
83. Li X, Wang K, Lgbari F et al (2020) Indium doped CsPbI3 films for inorganic perovskite solar cells with efficiency exceeding 17%. Nano Res 13:2203–2208. https://doi.org/10.1007/s12274-020-2836-310.1007/s12274-020-2836-3 ↗
84. Wang Y, Zhang T, Kan M, Zhao Y (2018) Bifunctional stabilization of all-inorganic α-CsPbI 3 perovskite for 17% efficiency photovoltaics. J Am Chem Soc 140:12345–12348. https://doi.org/10.1021/jacs.8b0792710.1021/jacs.8b07927 ↗
85. Ye Q, Ma F, Zhao Y et al (2020) Stabilizing γ-CsPbI3 perovskite via phenylethylammonium for efficient solar cells with open-circuit voltage over 1.3 V. Small 16:1–7. https://doi.org/10.1002/smll.20200524610.1002/smll.202005246 ↗
86. Fu S, Wan L, Zhang W et al (2020) Tailoring in situ healing and stabilizing post-treatment agent for high-performance inverted CsPbI 3 perovskite solar cells with efficiency of 16.67%. ACS Energy Lett 5:3314–3321. https://doi.org/10.1021/acsenergylett.0c0172810.1021/acsenergylett.0c01728 ↗
87. Zhang L, Kang C, Zhang G et al (2021) All-inorganic CsPbI 3 quantum dot solar cells with efficiency over 16% by defect control. Adv Funct Mater 31:2005930. https://doi.org/10.1002/adfm.20200593010.1002/adfm.202005930 ↗
88. Wang K, Jin Z, Liang L et al (2019) Chlorine doping for black γ-CsPbI3 solar cells with stabilized efficiency beyond 16%. Nano Energy 58:175–182. https://doi.org/10.1016/j.nanoen.2019.01.03410.1016/j.nanoen.2019.01.034 ↗
89. Zhang T, Wang F, Chen H et al (2020) Mediator-antisolvent strategy to stabilize all-inorganic CsPbI 3 for perovskite solar cells with efficiency exceeding 16%. ACS Energy Lett 5:1619–1627. https://doi.org/10.1021/acsenergylett.0c0049710.1021/acsenergylett.0c00497 ↗
90. Bian H, Wang Q, Yang S et al (2019) Nitrogen-doped graphene quantum dots for 80% photoluminescence quantum yield for inorganic γ-CsPbI 3 perovskite solar cells with efficiency beyond 16%. J Mater Chem A 7:5740–5747. https://doi.org/10.1039/C8TA12519H10.1039/C8TA12519H ↗
91. Ye T, Pan L, Yang Y et al (2020) Synthesis of highly-oriented black CsPbI 3 microstructures for high-performance solar cells. Chem Mater 32:3235–3244. https://doi.org/10.1021/acs.chemmater.0c0042710.1021/acs.chemmater.0c00427 ↗
92. Sun X, Shao Z, Rao Y et al (2021) A low-temperature additive-involved leaching method for highly efficient inorganic perovskite solar cells. Adv Energy Mater 11:2002754. https://doi.org/10.1002/aenm.20200275410.1002/aenm.202002754 ↗
93. Lim S, Lee G, Han S et al (2021) Monodisperse perovskite colloidal quantum dots enable high-efficiency photovoltaics. ACS Energy Lett 6:2229–2237. https://doi.org/10.1021/acsenergylett.1c0046210.1021/acsenergylett.1c00462 ↗
94. Hu L, Zhao Q, Huang S et al (2021) Flexible and efficient perovskite quantum dot solar cells via hybrid interfacial architecture. Nat Commun 12:466. https://doi.org/10.1038/s41467-020-20749-110.1038/s41467-020-20749-1 ↗
95. Yuan J, Zhang X, Sun J et al (2021) Hybrid perovskite quantum dot/non-fullerene molecule solar cells with efficiency over 15%. Adv Funct Mater 31:2101272. https://doi.org/10.1002/adfm.20210127210.1002/adfm.202101272 ↗
96. Zhang Z, Ji R, Kroll M et al (2021) Efficient thermally evaporated γ-CsPbI 3 perovskite solar cells. Adv Energy Mater 11:2100299. https://doi.org/10.1002/aenm.20210029910.1002/aenm.202100299 ↗
97. Lim S, Kim J, Park JY et al (2021) Suppressed degradation and enhanced performance of CsPbI 3 perovskite quantum dot solar cells via engineering of electron transport layers. ACS Appl Mater Interfaces 13:6119–6129. https://doi.org/10.1021/acsami.0c1548410.1021/acsami.0c15484 ↗
98. Ling X, Zhou S, Yuan J et al (2019) 14.1% CsPbI 3 perovskite quantum dot solar cells via cesium cation passivation. Adv Energy Mater 9(28):1900721. https://doi.org/10.1002/aenm.20190072110.1002/aenm.201900721 ↗
99. Lau CFJ, Wang Z, Sakai N et al (2019) Fabrication of efficient and stable CsPbI 3 perovskite solar cells through cation exchange process. Adv Energy Mater 9:1901685. https://doi.org/10.1002/aenm.20190168510.1002/aenm.201901685 ↗
100. Shivarudraiah SB, Ng M, Li C-HA, Halpert JE (2020) All-inorganic, solution-processed, inverted CsPbI 3 quantum dot solar cells with a PCE of 13.1% achieved via a layer-by-layer FAI treatment. ACS Appl Energy Mater 3:5620–5627. https://doi.org/10.1021/acsaem.0c0058410.1021/acsaem.0c00584 ↗