Thermal stability of epitaxial cubic-TiN/(Al,Sc)N metal/semiconductor superlattices
Source abstract
Abstract
We report on the thermal stability of epitaxial cubic-TiN/(Al,Sc)N metal/semiconductor superlattices with the rocksalt crystal structure for potential plasmonic, thermoelectric, and hard coating applications. TiN/Al0.72Sc0.28N superlattices were annealed at 950 and 1050 °C for 4, 24, and 120 h, and the thermal stability was characterized by high-energy synchrotron-radiation-based 2D X-ray diffraction, high-resolution (scanning) transmission electron microscopy [HR(S)/TEM], and energy dispersive X-ray spectroscopy (EDX) mapping. The TiN/Al0.72Sc0.28N superlattices were nominally stable for up to 4 h at both 950 and 1050 °C. Further annealing treatments for 24 and 120 h at 950 °C led to severe interdiffusion between the layers and the metastable cubic-Al0.72Sc0.28N layers partially transformed into Al-deficient cubic-(Al,Sc)N and the thermodynamically stable hexagonal wurtzite phase with a nominal composition of AlN (h-AlN). The h-AlN grains displayed two epitaxial variants with respect to c-TiN and cubic-(Al,Sc)N. EDX mapping suggests that scandium has a higher tendency for diffusion in TiN/(Al,Sc)N than titanium or aluminum. Our results indicate that the kinetics of interdiffusion and the cubic-to-hexagonal phase transformation place constraints on the design and implementation of TiN/(Al,Sc)N superlattices for high-temperature applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Semiconductor materials and devices · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Sands T, Palmstrøm CJ, Harbison JP, Keramidas VG, Tabatabaie N, Cheeks TL, Silberberg Y (1990) Stable and epitaxial Metal/III-V semiconductor heterostructures. Mater Sci Rep 5:98–17010.1016/S0920-2307(05)80003-9 ↗
2. Saha B, Saber S, Naik GV, Boltasseva A, Stach EA, Kvam EP, Sands TD (2014) Development of epitaxial AlxSc1-xN for artificially structured metal/semiconductor superlattice metamaterials. Phys Status Solidi B. doi: 10.1002/pssb.20145131410.1002/pssb.201451314 ↗
3. Wong MS, Hsiao GY, Yang SY (2000) Preparation and characterization of AlN/ZrN and AlN/TiN nanolaminate coatings. Surf Coat Technol 133:160–16510.1016/S0257-8972(00)00958-0 ↗
4. Naik GV, Saha B, Liu J, Saber SM, Stach EA, Irudayaraj JMK, Sands TD, Shalaev VM, Boltasseva A (2014) Epitaxial superlattices with titanium nitride as a plasmonic component for optical hyperbolic metamaterials. Proc Natl Acad Sci USA 111:7546–755110.1073/pnas.1319446111 ↗
5. Saha B, Lawrence SK, Schroeder JL, Birch J, Bahr DF, Sands TD (2014) Enhanced hardness in epitaxial TiAlScN alloy thin films and rocksalt TiN/(Al, Sc)N superlattices. Appl Phys Lett 105:15190410.1063/1.4898067 ↗
6. Guler U, Boltasseva A, Shalaev VM (2014) Refractory plasmonics. Science 344:263–26410.1126/science.1252722 ↗
7. Zebarjadi M, Bian ZX, Singh R, Shakouri A, Wortman R, Rawat V, Sands T (2009) Thermoelectric transport in a ZrN/ScN superlattice. J Electron Mater 38:960–96310.1007/s11664-008-0639-5 ↗
8. Shakouri A, Zebarjadi M (2009) Nanoengineered materials for thermoelectric energy conversion. In: Volz S (ed) Thermal nanosystems and nanomaterials. Springer, Berlin, pp 225–29910.1007/978-3-642-04258-4_9 ↗
9. Norrby N, Johansson MP, M’saoubi R, Oden M (2012) Pressure and temperature effects on the decomposition of arc evaporated Ti0.6Al0.4 N coatings in continuous turning. Surf Coat Technol 209:203–20710.1016/j.surfcoat.2012.08.068 ↗
10. Carvalho SR, Silva S, Machado AR, Guimaraes G (2006) Temperature determination at the chip-tool interface using an inverse thermal model considering the tool and tool holder. J Mater Process Technol 179:97–10410.1016/j.jmatprotec.2006.03.086 ↗
11. Hoglund C, Alling B, Birch J, Beckers M, Persson POA, Baehtz C, Czigany Z, Jensen J, Hultman L (2010) Effects of volume mismatch and electronic structure on the decomposition of ScAlN and TiAlN solid solutions. Phys Rev B 81:22410110.1103/PhysRevB.81.224101 ↗
12. Ghafoor N, Johnson LJS, Klenov DO, Demeulemeester J, Desjardins P, Petrov I, Hultman L, Oden M (2013) Nanolabyrinthine ZrAlN thin films by self-organization of interwoven single-crystal cubic and hexagonal phases. APL Mat 1:02210510.1063/1.4818170 ↗
13. Chen D, Wang YM, Ma XL (2009) Size-effect on stress behavior of the AlN/TiN film. Acta Mater 57:2576–258210.1016/j.actamat.2009.02.018 ↗
14. Deng RP, Muralt P, Gall D (2012) Biaxial texture development in aluminum nitride layers during off-axis sputter deposition. J Vac Sci Technol A 30:05150110.1116/1.4732129 ↗
15. Engstrom C, Birch J, Hultman L, Lavoie C, Cabral C, Jordan-Sweet JL, Carlsson JRA (1999) Interdiffusion studies of single crystal TiN/NbN superlattice thin films. J Vac Sci Technol A 17:2920–292710.1116/1.581961 ↗
16. Setoyama M, Irie M, Ohara H, Tsujioka M, Takeda Y, Nomura T, Kitagawa N (1999) Thermal stability of TiN/AlN superlattices. Thin Solid Films 341:126–13110.1016/S0040-6090(98)01511-9 ↗
17. Kim DG, Seong TY, Baik YJ (2002) Effects of annealing on the microstructures and mechanical properties of UN/A1 N nano-multilayer films prepared by ion-beam assisted deposition. Surf Coat Technol 153:79–8310.1016/S0257-8972(01)01543-2 ↗
18. Barshilia HC, Jain A, Rajam KS (2003) Structure, hardness and thermal stability of nanolayered TiN/CrN multilayer coatings. Vacuum 72:241–24810.1016/j.vacuum.2003.08.003 ↗
19. Barshilia HC, Prakash MS, Jain A, Rajam KS (2005) Structure, hardness and thermal stability of TiAlN and nanolayered TiAlN/CrN multilayer films. Vacuum 77:169–17910.1016/j.vacuum.2004.08.020 ↗
20. Burmistrova P (2012) Microstructure and thermoelectric properties of ScN thin films and metal/ScN superlattices for high-temperature energy conversion. Ph.D. Dissertation, Purdue University