Electrochemical properties of Na0.5Bi0.5TiO3 perovskite as an anode material for sodium ion batteries
Source abstract
Abstract
Sodium ion batteries (SIBs) are possible low-cost alternative to the current lithium ion batteries and hold great perspectives for large-scale renewable energy storage. However, the unavailability of appropriate anode material hinders the practical application of SIBs. Herein, we have examined the structural and electrochemical properties of perovskite Na0.5Bi0.5TiO3 (NBTO) and explored the possibilities of utilizing it as an anode component for Na ion batteries. The electrochemical measurement shows that the perovskite NBTO exhibits high sodium storage capability via alloying/de-alloying reaction, fast sodium storage kinetics, and a good cyclability. The perovskite Na0.5Bi0.5TiO3 delivers a high capacity of ~ 470 mAh g−1 at 100 mA g−1 and 230 mAh g−1 at 250 mA g−1, emerging as a new anode for SIBs. Furthermore, the perovskite Na0.5Bi0.5TiO3 can retain a capacity of ~ 215 mAh g−1 after 50 cycles at 100 mA g−1, which is comparable to several previous metal oxide anodes. In addition, the sodium storage behavior is investigated by ex situ XRD and XPS techniques. The high capacity and good rate capability suggest that the perovskite Na0.5Bi0.5TiO3 has great potential to serve as anodes for high-performing SIBs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Ferroelectric and Piezoelectric Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Li X, Kehui Q, Yuyan G, Xia H, Fangdong Z (2015) High potential performance of Cerium-doped LiNi0.5Co0.2Mn0.3O2 cathode material for Li-ion battery. J Mater Sci 50:2914–2920. https://doi.org/10.1007/s10853-015-8856-910.1007/s10853-015-8856-9 ↗
2. Johnston-Peck AC, Takeuchi S, Bharathi KK, Herzing AA, Bendersky LA (2018) Local degradation pathways in lithium-rich manganese–nickel–cobalt oxide epitaxial thin films. J Mater Sci 53:1365–1379. https://doi.org/10.1007/s10853-017-1593-510.1007/s10853-017-1593-5 ↗
3. Aricò AS, Bruce P, Scrosati B, Tarascon JM, Schalkwijk WV (2005) Nanostructured materials for advanced energy conversion and storage devices. Nat Mater 4:366–37710.1038/nmat1368 ↗
4. Armand M, Tarascon JM (2008) Building better batteries. Nature 451:652–65710.1038/451652a ↗
5. Thackeray MM, Wolverton C, Isaacs ED (2012) Electrical energy storage for transportation—approaching the limits of, and going beyond, lithium-ion batteries. Energy Environ Sci 5:7854–786310.1039/c2ee21892e ↗
6. Vetter J, Novak P, Wagner MR, Veit C, Moller KC, Besenhard JO, Winter M, Mehrens MW, Vogler C, Hammouche A (2005) Ageing mechanisms in lithium-ion batteries. J Power Sources 147:269–28110.1016/j.jpowsour.2005.01.006 ↗
7. Friege H, Reutter L, Gnutzmann N, Klöffer A, Mohrlok M, Sauce ADL, Wons W, Kross S (2016) An examination of batteries remaining in used electric and electronic devices: insights gained from a trans disciplinary project. Recycling 1:321–32710.3390/recycling1030321 ↗
8. Kim SM, Seo DH, Ma X, Ceder G, Kang K (2012) Electrode materials for rechargeable sodium-ion batteries: potential alternatives to current lithium-ion batteries. Adv Energy Mater 2:710–72110.1002/aenm.201200026 ↗
9. Kim D, Kang SH, Slater M, Rood S, Vaughey JT, Karan N, Balasubramanian M, Johnson CS (2011) Enabling sodium batteries using lithium-substituted sodium layered transition metal oxide cathodes. Adv Energy Mater 1:333–33610.1002/aenm.201000061 ↗
10. Ko YN, Choi SH, Kang YC (2016) Hollow cobalt selenide microspheres: synthesis and application as anode materials for Na-ion batteries. ACS Appl Mater Interfaces 8:6449–645610.1021/acsami.5b11963 ↗
11. Jache B, Adelhelm P (2014) Use of graphite as a highly reversible electrode with superior cycle life for sodium-ion batteries by making use of Co-intercalation phenomena. Angew Chem Int Ed 53:10169–1017310.1002/anie.201403734 ↗
12. Ji L, Lin Z, Alcoutlabi M, Zhang X (2011) Recent developments in nanostructured anode materials for rechargeable lithium-ion batteries. Energy Environ Sci 4:2682–269910.1039/c0ee00699h ↗
13. Wu HB, Chen JS, Hng HH, Lou XW (2012) Nanostructured metal oxide-based materials as advanced anodes for lithium-ion batteries. Nanoscale 4:2526–254210.1039/c2nr11966h ↗
14. Goriparti S, Miele E, Angelis FD, Fabrizio ED, Zaccaria RP, Capiglia C (2014) Review on recent progress of nanostructured anode materials for Li-ion batteries. J Power Sources 257:421–44310.1016/j.jpowsour.2013.11.103 ↗
15. Tian H, Xin F, Wang X, He W, Han W (2015) High capacity group-IV elements (Si, Ge, Sn) based anodes for lithium-ion batteries. J Materiomics 1(3):153–16910.1016/j.jmat.2015.06.002 ↗
16. Yu L, Wang LP, Xi S, Yang P, Du Y, Srinivasan M, Xu ZJ (2015) β-FeOOH: an earth-abundant high-capacity negative electrode material for sodium-ion batteries. Chem Mater 27(15):5340–534810.1021/acs.chemmater.5b01747 ↗
17. Jiang Y, Hu M, Zhang D, Yuan T, Sun W, Xu B, Yan M (2014) Transition metal oxides for high performance sodium ion battery anodes. Nano Energy 5:60–6610.1016/j.nanoen.2014.02.002 ↗
18. Sun Q, Ren QQ, Li H, Fu ZW (2011) High capacity Sb2O4 thin film electrodes for rechargeable sodium battery. Electrochem Commun 13:1462–146410.1016/j.elecom.2011.09.020 ↗
19. Hu Z, Wang LX, Zhang K, Wang JB, Cheng FY, Tao ZL, Chen J (2014) MoS2 nanoflowers with expanded interlayers as high-performance anodes for sodium-ion batteries. Angew Chem Int Ed 53:12794–1279810.1002/anie.201407898 ↗
20. Shimizu M, Usui H, Sakaguchi H (2014) Electrochemical Na insertion/extraction properties of SnO thick-film electrodes prepared by gas-deposition. J Power Sources 248:378–38210.1016/j.jpowsour.2013.09.046 ↗
21. Xu J, Wang M, Wickramaratne NP, Jaronie M, Dou S, Dai L (2015) High-performance sodium ion batteries based on three-dimensional anode from nitrogen-doped graphene foams. Adv Mater 27:2042–204810.1002/adma.201405370 ↗
22. Ponrouch A, Goñi AR, Palacín MR (2013) High capacity hard carbon anodes for sodium ion batteries in additive free electrolyte. Electrochem Commun 27:85–8810.1016/j.elecom.2012.10.038 ↗
23. Pol VG, Lee E, Zhou D, Dogan F, Calderon-Moreno JM, Johnson CS (2014) Spherical carbon as a new high-rate anode for sodium-ion batteries. Electrochim Acta 127:6110.1016/j.electacta.2014.01.132 ↗
24. Veerappana G, Yoo S, Zhang K, Ma M, Kang B, Park JH (2016) High-reversible capacity of perovskite BaSnO3/rGO composite for lithium-ion battery anodes. Electrochim Acta 214:31–3710.1016/j.electacta.2016.07.076 ↗
25. Sharma Y, Sharma N, Subba Rao GV, Chowdari BVR (2008) Studies on nano-CaO·SnO2 and nano-CaSnO3 as anodes for Li-ion batteries. Chem Mater 20(21):6829–683910.1021/cm8020098 ↗
26. Jones GO, Thomas PA (2002) Investigation of the structure and phase transitions in the novel A-site substituted distorted perovskite compound Na0.5Bi0.5TiO3. Acta Cryst B 58:168–17810.1107/S0108768101020845 ↗
27. Dorcet V, Trolliard G, Boullay P (2008) Reinvestigation of phase transitions in Na0.5Bi0.5TiO3 by TEM. Part I: first order rhombohedral to orthorhombic phase transition. Chem Mater 20:5061–507310.1021/cm8004634 ↗
28. Ranjan R, Dviwedi A (2005) Structure and dielectric properties of (Na0.50Bi0.50)1−xBaxTiO3:0 ≤ x ≤ 0.10. Solid State Commun 135:394–39910.1016/j.ssc.2005.03.053 ↗
29. Ge W, Luo C, Zhang Q, Ren Y, Li J, Luo H, Viehland D (2014) Evolution of structure in Na0.5Bi0.5TiO3 single crystals with BaTiO3. Appl Phys Lett 105:1629131-5
30. Kaswan K, Agarwal A, Sanghi S, Singh O (2015) Rietveld refinement and dielectric properties of (Na0.5Bi0.5TiO3)–(Bi0.8Ba0.2FeO3) ceramics. In: AIP conference proceedings, vol 1665, p 14001410.1063/1.4918223 ↗
31. Lignesh D, Brindha M, Thomas CI, Kim DK, Bharathi KK (2017) Electrochemical properties of BiFeO3 nanoparticles: anode material for sodium-ion battery application. Mater Sci Semicond Process 68:165–17110.1016/j.mssp.2017.06.003 ↗
32. Suchanicz J, Sumara IJ, Kruzina TV (2011) Raman and infrared spectroscopy of Na0.5Bi0.5TiO3–BaTiO3 ceramics. J Electroceram 27:45–5010.1007/s10832-011-9648-5 ↗
33. Saïd S, Marchet P, Merle-Méjean T, Mercurio JP (2004) Raman spectroscopy study of the Na0.5Bi0.5TiO3–PbTiO3 system. Mater Lett 58:1405–140910.1016/j.matlet.2003.09.036 ↗
34. Kumar PR, Jung YH, Bharathi KK, Lim CH, Kim DK (2014) High capacity and low cost spinel Fe3O4 for the Na-ion battery negative electrode materials. Electrochim Acta 146:503–51010.1016/j.electacta.2014.09.081 ↗
35. Hu L, Zhong H, Zheng X, Huang Y, Zhang P, Chen Q (2012) CoMn2O4 spinel hierarchical microspheres assembled with porous nanosheets as stable anodes for lithium-ion batteries. Sci Rep 2(986):1–8
36. Song R, Song H, Zhou J, Chen X, Wua B, Yang HY (2012) Hierarchical porous carbon nanosheets and their favorable high-rate performance in lithium ion batteries. J Mater Chem 22:1236910.1039/c2jm31910a ↗
37. Yang S, Song H, Chen X, Okotrub AV, Bulusheva LG (2007) Electrochemical performance of arc-produced carbon nanotubes as anode material for lithium-ion batteries. Electrochim Acta 52:5286–529310.1016/j.electacta.2007.02.049 ↗
38. Ruffo R, Fathi R, Kim DJ, Jung YH, Mari CM, Kim DK (2013) Impedance analysis of Na0.44MnO2 positive electrode for reversible sodium batteries in organic electrolyte. Electrochim Acta 108:575–58210.1016/j.electacta.2013.07.009 ↗
39. Li M, Zhang LL, Yang XL, Sun HB, Huang YH, Liang G, Nia CB, Tao HC (2015) Synthesis and electrochemical performance of Na modified Li2Fe0.5Mn0.5SiO4 cathode material for Li ion batteries. RSC Adv 5:22818–2282410.1039/C5RA02129D ↗
40. Bhunia H, Bar A, Bera A, Pal AJ (2017) Simultaneous observation of surface- and edge-states of a 2D topological insulator through scanning tunneling spectroscopy and differential conductance imaging. Phys Chem Chem Phys 19:9872–987810.1039/C7CP00149E ↗
41. Perejon A, Jimenez PS, Maqueda LP, Criado JM, Paz JRD, Puche RS, Maso N, West AR (2014) Single phase, electrically insulating, multiferroic La-substituted BiFeO3 prepared by mechanosynthesis. J Mater Chem C 2:8398–841110.1039/C4TC01426J ↗
42. Wu M, Feng Q, Sun X, Wang H, Gielen G, Wu W (2015) Rice (Oryza sativa L.) plantation affects the stability of biochar in paddy soil. Sci Rep 5:1000110.1038/srep10001 ↗
43. Stadnichenko AI, Koshcheev SV, Boronin AI (2007) Oxidation of the polycrystalline gold foil surface and XPS study of oxygen states in oxide layers. Mosc Univ Chem Bull 62(6):343–34910.3103/S0027131407060090 ↗
44. Sun T, Zhang Z, Xiao J, Chen C, Xiao F, Wang S, Liu Y (2013) Facile and green synthesis of palladium nanoparticles-graphene-carbon nanotube material with high catalytic activity. Sci Rep 3:252710.1038/srep02527 ↗