Properties of Cu1−x K x InSe2 alloys
Source abstract
Abstract
Adding potassium to Cu(In,Ga)Se2 absorbers has been shown to enhance photovoltaic power conversion efficiency. To illuminate possible mechanisms for this enhancement and limits to beneficial K incorporation, the properties of Cu1−x K x InSe2 (CKIS) thin-film alloys have been studied. Films with K/(K + Cu), or x, from 0 to 1 were grown by co-evaporation, and probed by XRF, EPMA, SEM, XRD, UV–Visible spectroscopy, current–voltage, and TRPL measurements. Composition from in situ quartz crystal and EIES monitoring was well correlated with final film composition. Crystal lattice parameters showed linear dependence on x, indicating complete K incorporation and coherent structural character at all compositions in the and lattice directions, despite the different symmetries of CuInSe2 and KInSe2. The band gap energy showed pronounced bowing with x composition, in excellent agreement with experimental reports and semiconductor theory. Films of Mo/CKIS/Ni were non-ohmic, and increasing x from 0 to 0.58 decreased the apparent CKIS resistivity. Further evidence of decreased CKIS resistivity was observed with photoluminescence response, which increased by about half a decade for x > 0, and indicates increased majority carrier concentration. Minority carrier lifetimes increased by about an order of magnitude for films grown at x = 0.07 and 0.14, relative to CuInSe2 and x ≥ 0.30. This is the first report of a Cu-K-In-Se film with >1 at.% K, and the observed property changes at increased x (wider band gap; lower resistivity; increased lifetime) comprise valuable photovoltaic performance-enhancement strategies, suggesting that CKIS alloys have a role to play in future engineering advances.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Chirilă A, Reinhard P, Pianezzi F, et al. (2013) Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells. Nat Mater 12:1107–1111. doi: 10.1038/nmat378910.1038/nmat3789 ↗
2. Friedlmeier TM, Jackson P, Bauer A, et al. (2015) Improved photocurrent in Cu(In,Ga)Se2 solar cells: from 20.8% to 21.7% efficiency with CdS buffer and 21.0% Cd-free. IEEE J Photovolt 5:1487–1491. doi: 10.1109/JPHOTOV.2015.245803910.1109/JPHOTOV.2015.2458039 ↗
3. Jackson P, Hariskos D, Wuerz R, et al. (2015) Properties of Cu(In,Ga)Se2 solar cells with new record efficiencies up to 21.7%. physica status solidi (RRL)—rapid research letters 9:28–31. doi: 10.1002/pssr.20140952010.1002/pssr.201409520 ↗
4. Jackson P, Hariskos D, Wuerz R, Wischmann W, Powalla M (2014) Compositional investigation of potassium doped Cu(In,Ga)Se2 solar cells with efficiencies up to 20.8%. physica status solidi (RRL)—rapid research letters 8:219–222. doi: 10.1002/pssr.20140904010.1002/pssr.201409040 ↗
5. Laemmle A, Wuerz R, Powalla M (2013) Efficiency enhancement of Cu(In,Ga)Se2 thin-film solar cells by a post-deposition treatment with potassium fluoride. physica status solidi (RRL)—rapid research letters 7:631–634. doi: 10.1002/pssr.20130723810.1002/pssr.201307238 ↗
6. Laemmle A, Wuerz R, Powalla M (2015) Investigation of the effect of potassium on Cu(In,Ga)Se2 layers and solar cells. Thin Solid Films 582:27–30. doi: 10.1016/j.tsf.2014.10.08810.1016/j.tsf.2014.10.088 ↗
7. Mansfield LM, Noufi R, Muzzillo CP et al (2014) Enhanced performance in Cu(In,Ga)Se2 solar cells fabricated by the two-step selenization process with a potassium fluoride postdeposition treatment. IEEE J Photovolt 4:1650–1654. doi: 10.1109/JPHOTOV.2014.235425910.1109/JPHOTOV.2014.2354259 ↗
8. Pianezzi F, Reinhard P, Chirilă A et al (2014) Unveiling the effects of post-deposition treatment with different alkaline elements on the electronic properties of CIGS thin film solar cells. Phys Chem Chem Phys 16:8843–8851. doi: 10.1039/C4CP00614C10.1039/c4cp00614c ↗
9. Pianezzi F, Reinhard P, Chirilă A et al (2013) Defect formation in Cu(In, Ga)Se2 thin films due to the presence of potassium during growth by low temperature co-evaporation process. J Appl Phys 114:194508-1–194508-8. doi: 10.1063/1.483278110.1063/1.4832781 ↗
10. Reinhard P, Bissig B, Pianezzi F et al (2015) Features of KF and NaF postdeposition treatments of Cu(In,Ga)Se2 absorbers for high efficiency thin film solar cells. Chem Mater 27:5755–5764. doi: 10.1021/acs.chemmater.5b0233510.1021/acs.chemmater.5b02335 ↗
11. Contreras MA, Egaas B, Dippo P, et al. (1997) On the role of Na and modifications to Cu(In,Ga)Se2 absorber materials using thin-MF (M = Na, K, Cs) precursor layers. In: IEEE twenty-sixth conference record of the photovoltaic specialists conference, vol 359. doi: 10.1109/PVSC.1997.65410210.1109/PVSC.1997.654102 ↗
12. Wuerz R, Eicke A, Kessler F, Paetel S, Efimenko S, Schlegel C (2012) CIGS thin-film solar cells and modules on enamelled steel substrates. Sol Energy Mater Sol Cells 100:132–137. doi: 10.1016/j.solmat.2012.01.00410.1016/j.solmat.2012.01.004 ↗
13. Jeong GS, Cha ES, Moon SH, Ahn BT (2015) Effect of KF treatment of Cu(In,Ga)Se2 thin films on the photovoltaic properties of CIGS solar cells. Curr Photovolt Res 3:65–70
14. Maeda T, Kawabata A, Wada T (2015) First-principles study on alkali-metal effect of Li, Na, and K in CuInSe2 and CuGaSe2. Jpn J Appl Phys. 54:08KC20-1–08KC20-8. doi: 10.7567/JJAP.54.08KC2010.7567/JJAP.54.08KC20 ↗
15. Pistor P, Greiner D, Kaufmann CA et al (2014) Experimental indication for band gap widening of chalcopyrite solar cell absorbers after potassium fluoride treatment. Appl Phys Lett 105:063901-1–063901-4. doi: 10.1063/1.489288210.1063/1.4892882 ↗
16. Handick E, Reinhard P, Alsmeier J-H et al (2015) Potassium post-deposition treatment-induced band gap widening at Cu(In,Ga)Se2 surfaces—reason for performance leap? ACS Appl Mater Interfaces 7:27414–27420. doi: 10.1021/acsami.5b0923110.1021/acsami.5b09231 ↗
17. Reinhard P, Bissig B, Pianezzi F et al (2015) Alkali-templated surface nanopatterning of chalcogenide thin films: a novel approach toward solar cells with enhanced efficiency. Nano Lett 15:3334–3340. doi: 10.1021/acs.nanolett.5b0058410.1021/acs.nanolett.5b00584 ↗
18. Reinhard P, Pianezzi F, Bissig B et al (2015) Cu(In,Ga)Se2 thin-film solar cells and module—a boost in efficiency due to potassium. IEEE J Photovolt 5:656–663. doi: 10.1109/JPHOTOV.2014.237751610.1109/JPHOTOV.2014.2377516 ↗
19. Scheer R, Schock H-W (2011) Chalcogenide photovoltaics: physics, technologies, and thin film devices. Wiley, Weinheim10.1002/9783527633708 ↗
20. Velikanov AA, Shevchuk PP, Malinovskij VV, Grigorenko NF (1971) Investigation of the electric conductivity of In2Se3-K2Se system melts. Ukr Khim Zh 37:1224–1227
21. Weis J, Schäfer H, Schön G (1976) New ternary element (I)/element (III)-tellurides and selenides. Z Naturforsch B 31:1336–134010.1515/znb-1976-1008 ↗
22. Kish ZZ, Lazarev VB, Peresh EY, Semrad EE (1988) Compounds in In2Se3-K2Se. Neorg Mater 24:1602–1605
23. Wang P, Huang X-Y, Liu Y-L, Wei Y-G, Li J, Guo H-Y (2000) Solid state synthesis at intermediate temperature and structural characterization of KInSe2. Acta Chim Sinica 58:1005–1008
24. Schlosser M, Reiner C, Deiseroth H-J, Kienle L (2001) K2In12Se19, a complex new structure type based on icosahedral units of Se2−. Eur J Inorg Chem 2001:2241–2247. doi: 10.1002/1099-0682(200109)2001:9<2241::AID-EJIC2241>3.0.CO;2-E10.1002/1099-0682(200109)2001:9<2241::AID-EJIC2241>3.0.CO;2-E ↗
25. Kienle L, Simon A (2001) Microdomains and diffuse scattering in K2In12Se19. J Solid State Chem 161:385–395. doi: 10.1006/jssc.2001.935210.1006/jssc.2001.9352 ↗
26. Ma H-W, Guo Wang M-S et al (2003) K2MM‘3Se6 (M = Cu, Ag; M‘= Ga, In), a new series of metal chalcogenides with Chain–Sublayer–Chain Slabs: ∞ 1[M‘Se4] − ∞ 2[(MSe4)(M‘Se4)] − ∞ 1[M‘Se4]. Inorg Chem 42:1366–1370. doi: 10.1021/ic025936i10.1021/ic025936i ↗
27. Wang G-H, Guo H-Y (2004) Solid-state synthesis of K2CuIn3Se6 and its crystal structure and characterization. J Beijing Univ Chem Technol 31:73–77
28. Savelsberg G, Schafer H (1978) On ternary pnictides and chalcogenides of alkali metals with group IB and IIB elements. Z Naturforsch 33:370–37310.1515/znb-1978-0404 ↗
29. Folmer JCW, Jellinek F (1980) The valence of copper in sulphides and selenides: an X-ray photoelectron spectroscopy study. J Less Common Met 76:153–162. doi: 10.1016/0022-5088(80)90019-310.1016/0022-5088(80)90019-3 ↗
30. Klepp K, Boller H, Völlenkle H (1980) Neue Verbindungen mit KCu4S3-Struktur. Monatshefte für Chem/Chem Mon 111:727–733. doi: 10.1007/BF0090332610.1007/BF00903326 ↗
31. Stoll P, Nather C, Jess I, Bensch W (1999) KCu4Se3. Acta Crystallogr Sect C 55:286–288. doi: 10.1107/S010827019801435810.1107/S0108270198014358 ↗
32. Repins IL, Egaas B, Mansfield LM et al (2015) Fiber-fed time-resolved photoluminescence for reduced process feedback time on thin-film photovoltaics. Rev Sci Instrum 86:013907-1–013907-7. doi: 10.1063/1.490553510.1063/1.4905535 ↗
33. Schumann B, Kühn G, Boehnke UC, Neels H (1981) The structure of CuIn2.0Se3.5. Soviet Phys Crystallogr 26:678
34. Negami T, Kohara N, Nishitani M, Wada T (1994) Preparation of ordered vacancy chalcopyrite-type CuIn3Se5 thin films. Jpn J Appl Phys 33:L1251–L1253. doi: 10.1143/JJAP.33.L125110.1143/JJAP.33.L1251 ↗
35. Pankove JI (1975) Optical processes in semiconductors. Dover, Mineola
36. Eithiraj RD, Jaiganesh G, Kalpana G (2009) First-principles study of electronic structure and ground-state properties of alkali-metal selenides and tellurides (M2A) [M: Li, Na, K; A: Se, Te]. Int J Mod Phys B 23:5027–5037. doi: 10.1142/S021797920905241810.1142/S0217979209052418 ↗
37. Alay-e-abbas SM, Sabir N, Saeed Y, Shaukat A (2011) First-principles study of structural and electronic properties of alkali metal chalcogenides: M2CH [M: Li, Na, K, Rb; CH: O, S, Se, Te]. Int J Mod Phys B 25:3911–3925. doi: 10.1142/S021797921110093X10.1142/S021797921110093X ↗
38. Ali R, Khanata R, Amin B, Murtaza G, Bin Omran S (2013) Structural, elastic, electronic, chemical bonding and optical properties of M2Se (M = Li, Na, K, Rb) through first principle study. Int J Mod Phys B 27:1350170-1–1350170-17. doi: 10.1142/S021797921350170110.1142/S0217979213501701 ↗
39. Bodnar IV, Bologa AP, Korzun BV (1982) Composition dependence of the band gap of CuGa x In1–x Se2 solid solutions. Phys Status Solidi (b) 109:K31–K33. doi: 10.1002/pssb.222109015610.1002/pssb.2221090156 ↗
40. Albornoz JG, Serna R, León M (2005) Optical properties and electronic structure of polycrystalline Ag1−x Cu x InSe2 alloys. J Appl Phys 97:103515-1–103515-7. doi: 10.1063/1.189924310.1063/1.1899243 ↗
41. Bacewicz R, Durrant JR, Ciszek TF, Deb SK (1987) Optical and electrical properties of Cu x Ag1−x InSe2 and CuInyGa1−ySe2 alloys. In: Proceedings of the 7th international conference on ternary and multinary compounds. p 155–160
42. Paulson PD, Haimbodi MW, Marsillac S, Birkmire RW, Shafarman WN (2002) CuIn1−x Al x Se2 thin films and solar cells. J Appl Phys 91:10153–10156. doi: 10.1063/1.147696610.1063/1.1476966 ↗
43. Wei SH, Zunger A (1995) Band offsets and optical bowings of chalcopyrites and Zn-based II-VI alloys. J Appl Phys 78:3846–3856. doi: 10.1063/1.35990110.1063/1.359901 ↗
44. Zunger A, Jaffe JE (1983) Structural origin of optical bowing in semiconductor alloys. Phys Rev Lett 51:662–66510.1103/PhysRevLett.51.662 ↗
45. Kotochigova S, Levine ZH, Shirley EL, Stiles MD, Clark CW (1997) Local-density-functional calculations of the energy of atoms. Phys Rev A 55:191–19910.1103/PhysRevA.55.191 ↗
46. Shan W, Walukiewicz W, Wu J et al (2003) Band-gap bowing effects in B x Ga1−x As alloys. J Appl Phys 93:2696–2699. doi: 10.1063/1.154023010.1063/1.1540230 ↗
47. Zhu YZ, Chen GD, Ye H, Walsh A, Moon CY, Wei S-H (2008) Electronic structure and phase stability of MgO, ZnO, CdO, and related ternary alloys. Phys Rev B 77:245209-1–245209-7. doi: 10.1103/PhysRevB.77.24520910.1103/PhysRevB.77.245209 ↗
48. Yang J-H, Chen S, Yin W-J, Gong XG, Walsh A, Wei S-H (2009) Electronic structure and phase stability of MgTe, ZnTe, CdTe, and their alloys in the B3, B4, and B8 structures. Phys Rev B 79:245202–245207. doi: 10.1103/PhysRevB.79.24520210.1103/PhysRevB.79.245202 ↗
49. Jaffe JE, Zunger A (1983) Anion displacements and the band-gap anomaly in ternary ABC2 chalcopyrite semiconductors. Phys Rev B 27:5176–5179. doi: http://link.aps.org/doi/10.1103/PhysRevB.27.5176
50. Dharmadasa IM, Chaure NB, Samantilleke AP, Hassan A (2008) Multi Fermi level pinning at metal/Cu(InGa)(SeS)2 interfaces. Sol Energy Mater Sol Cells 92:923–928. doi: 10.1016/j.solmat.2008.02.02510.1016/j.solmat.2008.02.025 ↗