Comparative study on microstructure and electrical properties of (K0.5Na0.5)NbO3 lead-free ceramics prepared via two different sintering methods
Source abstract
Abstract
Two different sintering methods, i.e., a hot-press sintering method and a conventional sintering method, were utilized to prepare (K0.5Na0.5)NbO3 lead-free piezoelectric ceramics. Microstructure, dielectric, ferroelectric, and piezoelectric properties of the ceramics obtained via the two methods were comparatively studied. Both the ceramics exhibit a single orthorhombic phase. The ceramic via the conventional sintering method shows micron-sized grains and poor densification with many pores. By means of the hot-press sintering, the mean size of grains decreases to 0.1 μm and relative density increases to 96%. The evolution of domains with electrical field was detected via a scanning probe microscope, indicating field-induced domain switching on the microscale. Compared to the conventional sintering, the hot-press sintering causes an increase in the dielectric constant from 183 to 830, remnant polarization from 8.5 to 17.3 μC cm−2, piezoelectric constant from 60 to 120 pC N−1, and helps a decrease in the dielectric loss from 0.46 to 0.02, coercive field from 20 to 16 kV cm−1. The hot-press sintering facilitates improving the electrical properties of the (K0.5Na0.5)NbO3 ceramic.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Multiferroics and related materials · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Bell AJ (2008) Ferroelectrics: the role of ceramic science and engineering. J Eur Ceram Soc 28:1307–131710.1016/j.jeurceramsoc.2007.12.014 ↗
2. Wu JG, Xiao DQ, Zhu JG (2015) Potassium-sodium niobate lead-free piezoelectric materials: past, present, and future of phase boundaries. Chem Rev 115:2559–259510.1021/cr5006809 ↗
3. Pan Z, Chen J, Fan LL, Zhang J, Zhang ST, Huang Y, Liu L, Fang L, Xing X (2015) Enhanced piezoelectric properties and thermal stability in the (K0.5Na0.5)NbO3:ZnO lead-free piezoelectric composites. J Am Ceram Soc 98:3935–394110.1111/jace.13831 ↗
4. Birol H, Damjanovic D, Setter N (2006) Preparation and characterization of (K0.5Na0.5)NbO3 ceramics. J Eur Ceram Soc 26:861–86610.1016/j.jeurceramsoc.2004.11.022 ↗
5. Malic B, Bernard J, Holc J, Jenko D, Kosec M (2005) Alkaline-earth doping in (K, Na)NbO3 based piezoceramics. J Eur Ceram Soc 25:2707–271110.1016/j.jeurceramsoc.2005.03.127 ↗
6. Singh RJ, Kulkarni AR, Harendranath CS (2014) Effect of sintering temperature on composition, microstructure and electrical properties of K0.5Na0.5NbO3 ceramics. Physica B 434:139–14410.1016/j.physb.2013.10.052 ↗
7. Yu L, Yang J, Qiu T, Guo DD, Pan LM, Zhang JX (2013) Microstructure and mechanical properties of (ZrB2 + ZrC)/Zr3[Al(Si)]4C6 composites prepared by in situ hot-pressing. Mater Lett 96:188–19110.1016/j.matlet.2013.01.054 ↗
8. Noviyanto A, Yoon DH, Han YH (2013) Phase formation of Si-based ceramic composites from polyureasilazane prepared by hot pressing and EFAS. Scr Mater 69:127–13010.1016/j.scriptamat.2013.02.011 ↗
9. Zhang GZ, Liu SS, Yu Y, Zeng Y, Zhang YY, Hu X (2013) Microstructure and electrical properties of (Pb0.87Ba0.1La0.02)(Zr0.68Sn0.24Ti0.08)O3 anti-ferroelectric ceramics fabricated by the hot-press sintering method. J Eur Ceram Soc 33:113–12110.1016/j.jeurceramsoc.2012.08.011 ↗
10. Li FL, Kwok KW (2013) Fabrication of transparent electro-optic (K0.5Na0.5)1−xLixNb1−xBixO3 lead-free ceramics. J Eur Ceram Soc 33:123–13010.1016/j.jeurceramsoc.2012.08.017 ↗
11. Egerton L (1959) Piezoelectric and dielectric properties of ceramics in the system potassium sodium niobate. J Am Ceram Soc 42:438–44210.1111/j.1151-2916.1959.tb12971.x ↗
12. Jaeger RE, Egerton L (1962) Hot pressing of potassium-sodium niobates. J Am Ceram Soc 45:209–21310.1111/j.1151-2916.1962.tb11127.x ↗
13. Kim KL, Tsou NT, Huber JE (2013) Domain evolution processes during poling of a near-morphotropic Pb(Zr, Ti)O3 ceramic. J Appl Phys 113:19410410.1063/1.4804955 ↗
14. Qin YL, Zhang JL, Gao Y, Tan YQ, Wang CL (2013) Study of domain structure of poled (K, Na)NbO3 ceramics. J Appl Phys 113:20410710.1063/1.4807919 ↗
15. JCPDS-ICDD Card (2002) International centre for diffraction data, Newtown Square
16. Zhang BP, Li JF, Wang K, Zhang HL (2006) Compositional dependence of piezoelectric properties in NaxK1−xNbO3 lead-free ceramics prepared by spark plasma sintering. J Am Ceram Soc 89:1605–160910.1111/j.1551-2916.2006.00960.x ↗
17. Rahaman MN (2007) Sintering of ceramics. CRC Press, Taylor Francis Group, Boca Raton10.1201/b15869 ↗
18. Liu ZY, Fan HQ, Zhao YW, Dong GZ (2016) Optical and tunable dielectric properties of K0.5Na0.5NbO3-SrTiO3 ceramics. J Am Ceram Soc 99:146–15110.1111/jace.13864 ↗
19. Hao J, Xu Z, Chu R, Li W, Du J (2015) Bright reddish-orange emission and good piezoelectric properties of Sm2O3-modified (K0.5Na0.5)NbO3-based lead-free piezoelectric ceramics. J Appl Phys 117:19410410.1063/1.4921451 ↗
20. Islam MS (2000) Ionic transport in ABO3 perovskite oxides: a computer modelling tour. J Mater Chem 10:1027–103710.1039/a908425h ↗
21. Yang SL, Hong CS, Tsai CC, Liou YC, Chu SY (2012) Effects of modified-process on the microstructure, internal bias field, and activation energy in CuO-doped NKN ceramics. J Eur Ceram Soc 32:1643–165010.1016/j.jeurceramsoc.2011.12.008 ↗
22. Shimizu H, Kobayashi K, Mizuno Y, Randall CA (2014) Advantages of low partial pressure of oxygen processing of alkali niobate: NaNbO3. J Am Ceram Soc 97:1791–179610.1111/jace.12815 ↗
23. Tauc J, Grigorovici R, Vancu A (1966) Optical properties and electronic structure of amorphous germanium. Phys Status Solidi 15:627–63710.1002/pssb.19660150224 ↗
24. Kubelka P, Munk F (1931) An article on optics of paint layers. Z Tech Phys 12:593–601
25. Wang Z, Gu HS, Hu YM, Yang K, Hu MZ, Zhou D, Guan JG (2010) Growth mechanism and optical properties of (K, Na)NbO3 nanostructures. CrystEngComm 12:3157–316210.1039/c000169d ↗
26. Liu C, Liu P, Kobayashi K, Qu WG, Randall CA (2013) Enhancement of piezoelectric performance of lead-free NKN-based ceramics via a high-performance flux-NaF-Nb2O5. J Am Ceram Soc 96:3120–312610.1111/jace.12461 ↗
27. Cho CW, Cha MR, Jang JY, Lee SH, Kim DJ, Park S, Bae JS, Bu SD, Lee S, Huh J (2012) Ferroelectric relaxor properties of (1 − x)K0.5Na0.5NbO3-xBa0.5Ca0.5TiO3 ceramics. Curr Appl Phys 12:1266–127110.1016/j.cap.2012.03.006 ↗
28. Uchino K, Nomura S (1982) Critical exponents of the dielectric constants in diffused-phase-transition crystals. Ferroelectrics 44:55–6110.1080/00150198208260644 ↗
29. Zhang QM, Wang H, Kim N, Cross LE (1994) Direct evaluation of domain-wall and intrinsic contributions to the dielectric and piezoelectric response and their temperature dependence on lead zirconate-titanate ceramics. J Appl Phys 75:454–45910.1063/1.355874 ↗
30. Cheng XJ, Wu JG, Zheng T, Wang XP, Zhang BY, Xiao DQ, Zhu JG, Wang XJ, Lou XJ (2014) Rhombohedral-tetragonal phase coexistence and piezoelectric properties based on potassium-sodium niobate ternary system. J Alloys Compd 610:86–9110.1016/j.jallcom.2014.04.194 ↗
31. Randall CA, Kim N, Kucera JP, Shrout TR (1998) Intrinsic and extrinsic size effects in fine-grained morphotropic-phase-boundary lead zirconate titanate ceramics. J Am Ceram Soc 81:677–68810.1111/j.1151-2916.1998.tb02389.x ↗
32. Okazaki K, Nagata K (1973) Effects of grain size and porosity on electrical and optical properties of PLZT ceramics. J Am Ceram Soc 56:82–8610.1111/j.1151-2916.1973.tb12363.x ↗
33. Guerrero F, Amorin H, Portelles JJ, Fundora A, Siqueiros JM, Hirata GA, Aguilera S (1999) Dielectric properties of La3+ doped Sr0.3−3y/2LayBa0.7Nb2O6 ceramics prepared under different sintering conditions. J Electroceram 3:377–38510.1023/A:1009970031479 ↗