DFT study of the stability of oxygen vacancy in cubic ABO3 perovskites
Source abstract
Abstract
Rare earth and alkaline earth metal perovskites with general formula ABO3 have attracted much attention as electrocatalysts for state-of-the-art fuel cells, and catalysts for hydrogen generation and hydrocarbons oxidation. Tuning the ion conductivity through doping A and B and subsequent formation of oxygen vacancies is essential for the performance of perovskites materials. To provide insights into factors that affect stability of oxygen vacancies and understand the origin of the activity of doped perovskite materials, we investigate the structure and energetics of cubic ABO3 perovskites (A = La and/or Be, Mg, Ca, Sr, Ba; B = Ti, V, Cr, Mn, Fe, Co, and Ni) using density functional theory calculations. It is found that the lattice constant of ABO3 generally increases as the ionic radius of A and B; the bulk formation energy of ABO3 is decomposed into the ionization energy and lattice energy, which depend on the ionic radius and valence. The trend of bulk formation energy corresponds to that of ionization energy at a given ionic valence, while corresponds to that of lattice energy as doping La by alkali earth metals with lower valence. There exists a good linear relationship between the bulk formation energy and oxygen vacancy formation energy. This work provides an understanding toward the origin of the activity of perovskites at the atomic level.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Magnetic and transport properties of perovskites and related materials · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Arakawa T, Kurachi H, Shiokawa J (1985) Physicochemical properties of rare-earth perovskite oxides used as gas sensor material. J Mater Sci 20:1207–121010.1007/BF01026315 ↗
2. Bokov AA, Ye ZG (2006) Recent progress in relaxor ferroelectrics with perovskite structure. J Mater Sci 41:31–5210.1007/s10853-005-5915-7 ↗
3. Israel C, Calderon MJ, Mathur ND (2007) The current spin on manganites. Mater Today 10:24–3210.1016/S1369-7021(07)70242-0 ↗
4. Kim CH, Qi G, Dahlberg K, Li W (2010) Strontium-doped perovskites rival platinum catalysts for treating NOx in simulated diesel exhaust. Science 327:1624–162710.1126/science.1184087 ↗
5. Mathur ND, Burnell G, Isaac SP, Jackson TJ, Teo BS, MacManusDriscoll JL, Cohen LF, Evetts JE, Blamire MG (1997) Large low-field magnetoresistance in La0.7Ca0.3MnO3 induced by artificial grain boundaries. Nature 387:266–26810.1038/387266a0 ↗
6. Huang YH, Dass RI, Xing ZL, Goodenough JB (2006) Double perovskites as anode materials for solid-oxide fuel cells. Science 312:254–25710.1126/science.1125877 ↗
7. Mawdsley JR, Krause TR (2008) Rare earth-first-row transition metal perovskites as catalysts for the autothermal reforming of hydrocarbon fuels to generate hydrogen. Appl Catal A 334:311–32010.1016/j.apcata.2007.10.018 ↗
8. Nitadori T, Ichiki T, Misono M (1988) Catalytic properties of perovskite-type mixed oxides (ABO3) consisting of rare-earth and 3d Transition-metals-the roles of the A-site and B-site ions. Bull Chem Soc Jpn 61:621–62610.1246/bcsj.61.621 ↗
9. Thiele D, Zuettel A (2008) Electrochemical characterisation of air electrodes based on La0.6Sr0.4CoO3 and carbon nanotubes. J Power Sources 183:590–59410.1016/j.jpowsour.2008.05.042 ↗
10. Dailly J, Fourcade S, Largeteau A, Mauvy F, Grenier JC, Marrony M (2010) Perovskite and A2MO4-type oxides as new cathode materials for protonic solid oxide fuel cells. Electrochim Acta 55:5847–585310.1016/j.electacta.2010.05.034 ↗
11. Dutta A, Mukhopadhyay J, Basu RN (2009) Combustion synthesis and characterization of LSCF-based materials as cathode of intermediate temperature solid oxide fuel cells. J Eur Ceram Soc 29:2003–201110.1016/j.jeurceramsoc.2008.11.011 ↗
12. Huang C, Chen D, Lin Y, Ran R, Shao Z (2010) Evaluation of Ba0.6Sr0.4Co0.9Nb0.1O3−δ mixed conductor as a cathode for intermediate-temperature oxygen-ionic solid-oxide fuel cells. J Power Sources 195:5176–518410.1016/j.jpowsour.2010.02.080 ↗
13. Ishihara T, Shibayama T, Nishiguchi H, Takita Y (2001) Oxide ion conductivity in La0.8Sr0.2Ga0.8Mg0.2−xNixO3 perovskite oxide and application for the electrolyte of solid oxide fuel cells. J Mater Sci 36:1125–113110.1023/A:1004821607054 ↗
14. Jacobson AJ (2010) Materials for solid oxide fuel cells. Chem Mater 22:660–67410.1021/cm902640j ↗
15. Jiang SP (2008) Development of lanthanum strontium manganite perovskite cathode materials of solid oxide fuel cells: a review. J Mater Sci 43:6799–683310.1007/s10853-008-2966-6 ↗
16. Kim JH, Manthiram A (2008) LnBaCo2O5+δ oxides as cathodes for intermediate-temperature solid oxide fuel cells. J Electrochem Soc 155:B385–B39010.1149/1.2839028 ↗
17. Kim-Lohsoontorn P, Brett DJL, Laosiripojana N, Kim YM, Bae JM (2010) Performance of solid oxide electrolysis cells based on composite La0.8Sr0.2MnO3−δ-yttria stabilized zirconia and Ba0.5Sr0.5Co0.8Fe0.2O3−δ oxygen electrodes. Int J Hydrogen Energy 35:3958–396610.1016/j.ijhydene.2010.02.039 ↗
18. Li X, Zhao H, Zhou X, Xu N, Xie Z, Chen N (2010) Electrical conductivity and structural stability of La-doped SrTiO3 with A-site deficiency as anode materials for solid oxide fuel cells. Int J Hydrogen Energy 35:7913–791810.1016/j.ijhydene.2010.05.043 ↗
19. Lin Y, Ran R, Zheng Y, Shao Z, Jin W, Xu N, Ahn J (2008) Evaluation of Ba0.5Sr0.5Co0.8Fe0.2O3−δ as a potential cathode for an anode-supported proton-conducting solid-oxide fuel cell. J Power Sources 180:15–2210.1016/j.jpowsour.2008.02.044 ↗
20. Orera A, Slater PR (2010) New chemical systems for solid oxide fuel cells. Chem Mater 22:675–69010.1021/cm902687z ↗
21. Pellegrino L, Biasotti M, Bellingeri E, Bernini C, Siri AS, Marre D (2009) All-Oxide crystalline microelectromechanical systems: bending the functionalities of transition-metal oxide thin films. Adv Mater 21:2377–238110.1002/adma.200803360 ↗
22. Sun C, Hui R, Roller J (2010) Cathode materials for solid oxide fuel cells: a review. J Solid State Electrochem 14:1125–114410.1007/s10008-009-0932-0 ↗
23. Suntivich J, May KJ, Gasteiger HA, Goodenough JB, Shao-Horn Y (2011) A perovskite oxide optimized for oxygen evolution catalysis from molecular orbital principles. Science 334:1383–138510.1126/science.1212858 ↗
24. Yang C, Jin C, Coffin A, Chen F (2010) Characterization of infiltrated (La0.75Sr0.25)0.95MnO3 as oxygen electrode for solid oxide electrolysis cells. Int J Hydrogen Energy 35:5187–519310.1016/j.ijhydene.2010.03.049 ↗
25. Yang X, Irvine JTS (2008) (La0.75Sr0.25)0.95Mn0.5Cr0.5O3 as the cathode of solid oxide electrolysis cells for high temperature hydrogen production from steam. J Mater Chem 18:2349–235410.1039/b800163d ↗
26. Yokokawa H, Sakai N, Kawada T, Dokiya M (1990) Chemical-potential diagrams for rare-earth transition-metal oxygen systems-I, Ln-V-O and Ln-Mn-O systems. J Am Ceram Soc 73:649–65810.1111/j.1151-2916.1990.tb06567.x ↗
27. Zhou W, Ran R, Shao Z (2009) Progress in understanding and development of Ba0.5Sr0.5Co0.8Fe0.2O3−δ-based cathodes for intermediate-temperature solid-oxide fuel cells: a review. J Power Sources 192:231–24610.1016/j.jpowsour.2009.02.069 ↗
28. Kan DS, Terashima T, Kanda R, Masuno A, Tanaka K, Chu SC, Kan H, Ishizumi A, Kanemitsu Y, Shimakawa Y, Takano M (2005) Blue-light emission at room temperature from Ar+-irradiated SrTiO3. Nat Mater 4:816–81910.1038/nmat1498 ↗
29. Liu ZQ, Leusink DP, Wang X, Lu WM, Gopinadhan K, Annadi A, Zhao YL, Huang XH, Zeng SW, Huang Z, Srivastava A, Dhar S, Venkatesan T, Ariando (2011) Metal-insulator transition in SrTiO3-x thin films induced by frozen-out carriers. Phys Rev Lett 107:14680210.1103/PhysRevLett.107.146802 ↗
30. Chen HT, Raghunath P, Lin MC (2011) Computational Investigation of O2 Reduction and diffusion on 25 % Sr-doped LaMnO3 cathodes in solid oxide fuel cells. Langmuir 27:6787–679310.1021/la200193a ↗
31. Choi Y, Lynch ME, Lin MC, Liu M (2009) Prediction of O2 dissociation kinetics on LaMnO3-based cathode materials for solid oxide fuel cells. J Phys Chem C 113:7290–729710.1021/jp811021p ↗
32. Choi Y, Mebane DS, Lin MC, Liu M (2007) Oxygen reduction on LaMnO3-based cathode materials in solid oxide fuel cells. Chem Mater 19:1690–169910.1021/cm062616e ↗
33. Choi Y, Lin MC, Liu M (2010) Rational design of novel cathode materials in solid oxide fuel cells using first-principles simulations. J Power Sources 195:1441–144510.1016/j.jpowsour.2009.09.017 ↗
34. Mastrikov YA, Merkle R, Heifets E, Kotomin EA, Maier J (2010) Pathways for oxygen incorporation in mixed conducting perovskites: a DFT-based mechanistic analysis for (La, Sr)MnO3−δ. J Phys Chem C 114:3017–302710.1021/jp909401g ↗
35. Mizusaki J, Yasuda I, Shimoyama J, Yamauchi S, Fueki K (1993) Electrical-conductivity, defect equilibrium and oxygen vacancy diffusion-cofficient of La1−xCaxAlO3−δ Single-crystals. J Electrochem Soc 140:467–47110.1149/1.2221070 ↗
36. Jones A, Islam MS (2008) Atomic-scale insight into LaFeO3 perovskite: defect nanoclusters and ion migration. J Phys Chem C 112:4455–446210.1021/jp710463x ↗
37. Bidrawn F, Lee S, Vohs JM, Gorte RJ (2008) The effect of Ca, Sr, and Ba doping on the ionic conductivity and cathode performance of LaFeO3. J Electrochem Soc 155:B660–B66510.1149/1.2907431 ↗
38. Kuhn JN, Matter PH, Millet J-MM, Watson RB, Ozkan US (2008) Oxygen exchange kinetics over Sr- and Co-doped LaFeO3. J Phys Chem C 112:12468–1247610.1021/jp801521y ↗
39. Yin W-J, Wei S-H, Al-Jassim MM, Yan Y (2012) Origin of the diverse behavior of oxygen vacancies in ABO3 perovskites: a symmetry based analysis. Phys Rev B 85:20120110.1103/PhysRevB.85.201201 ↗
40. Blochl PE (1994) Projector augmented-wave method. Phys Rev B 50:17953–1797910.1103/PhysRevB.50.17953 ↗
41. Perdew JP, Burke K, Ernzerhof M (1996) Generalized gradient approximation made simple. Phys Rev Lett 77:3865–386810.1103/PhysRevLett.77.3865 ↗
42. Lee Y-L, Kleis J, Rossmeisl J, Morgan D (2009) Ab initio energetics of LaBO3(001) (B = Mn, Fe Co, and Ni) for solid oxide fuel cell cathodes. Phys Rev B 80:22410110.1103/PhysRevB.80.224101 ↗
43. Norskov JK, Rossmeisl J, Logadottir A, Lindqvist L, Kitchin JR, Bligaard T, Jonsson H (2004) Origin of the overpotential for oxygen reduction at a fuel-cell cathode. J Phys Chem B 108:17886–1789210.1021/jp047349j ↗
44. Bollinger MV, Jacobsen KW, Norskov JK (2003) Atomic and electronic structure of MoS2 nanoparticles. Phys Rev B 67:08541010.1103/PhysRevB.67.085410 ↗
45. Sharma V, Pilania G, Rossetti GA Jr, Slenes K, Ramprasad R (2013) Comprehensive examination of dopants and defects in BaTiO3 from first principles. Phys Rev B 87:13410910.1103/PhysRevB.87.134109 ↗
46. Wang L, Maxisch T, Ceder G (2006) Oxidation energies of transition metal oxides within the GGA + U framework. Phys Rev B 73:19510710.1103/PhysRevB.73.195107 ↗
47. Fernandez EM, Moses PG, Toftelund A, Hansen HA, Martinez JI, Abild-Pedersen F, Kleis J, Hinnemann B, Rossmeisl J, Bligaard T, Norskov JK (2008) Scaling relationships for adsorption energies on transition metal oxide, sulfide, and nitride surfaces. Angew Chem Int Ed 47:4683–468610.1002/anie.200705739 ↗
48. Martinez JI, Hansen HA, Rossmeisl J, Norskov JK (2009) Formation energies of rutile metal dioxides using density functional theory. Phys Rev B 79:04512010.1103/PhysRevB.79.045120 ↗
49. Pople JA, Headgordon M, Fox DJ, Raghavachari K, Curtiss LA (1989) Gaussian-1 theory: a general procedure for prediction of molecular energies. J Chem Phys 90:5622–562910.1063/1.456415 ↗
50. Huheey JE, Keiter EA, Keiter RL (1993) Inorganic chemistry: principles of structure and reactivity, 4th edn. HarperCollins College, New York
51. Akhade SA, Kitchin JR (2011) Effects of strain, d-band filling, and oxidation state on the bulk electronic structure of cubic 3d perovskites. J Chem Phys 135:10470210.1063/1.3631948 ↗
52. Ali Z, Ahmad I (2013) Band Profile Comparison of the Cubic Perovskites CaCoO3 and SrCoO3. J Electron Mater 42:438–44410.1007/s11664-012-2377-y ↗
53. Ali Z, Ahmad I, Khan B, Khan I (2013) Robust half-metallicity and magnetic properties of cubic perovskite CaFeO3. Chinese Phys Lett 30:04750410.1088/0256-307X/30/4/047504 ↗
54. Kanamaru F, Miyamoto H, Mimura Y, Koizumi M, Shimada M, Kume S, Shin S (1970) Synthesis of a new perovskite CaFeO3. Mater Res Bull 5:257–26110.1016/0025-5408(70)90121-2 ↗
55. Li Z, Iitaka T, Tohyama T (2012) Pressure-induced ferromagnetism in cubic perovskite SrFeO3 and BaFeO3. Phys Rev B 86:09442210.1103/PhysRevB.86.094422 ↗
56. Macchesn Jb, Jetzt JJ, Potter JF, Williams HJ, Sherwood RC (1966) Electrical and magnetic properties of system SrFeO3–BiFeO3. J Am Ceram Soc 49:644–64710.1111/j.1151-2916.1966.tb13191.x ↗
57. Long Y, Kaneko Y, Ishiwata S, Taguchi Y, Tokura Y (2011) Synthesis of cubic SrCoO3 single crystal and its anisotropic magnetic and transport properties. J Phys Condens Matter 23:24560110.1088/0953-8984/23/24/245601 ↗
58. Yu L, Jin L, Han M (2012) First-principles study on electronic structures and oxygen vacancy energies of perovskite-type oxides BaBO3-delta (B = Fe, Co, Nb). J Synth Cryst 41:747–752
59. Erchak M, Fankuchen I, Ward R (1946) Reaction between ferric oxide and Barium carbonate in the solid phase-identification of phases by X-ray diffraction. J Am Chem Soc 68:2085–209310.1021/ja01214a063 ↗
60. Shen P, Liu X, Wang H, Ding W (2010) Niobium doping effects on performance of BaCo0.7Fe0.3−xNbxO3-delta perovskite. J Phys Chem C 114:22338–2234510.1021/jp108306z ↗
61. Calle-Vallejo F, Martinez JI, Garcia-Lastra JM, Mogensen M, Rossmeisl J (2010) Trends in stability of perovskite oxides. Angew Chem Int Ed 49:7699–770110.1002/anie.201002301 ↗
62. Slater JC (1930) Atomic shielding constants. Phys Rev 36:0057–006410.1103/PhysRev.36.57 ↗
63. Pena MA, Fierro JLG (2001) Chemical structures and performance of perovskite oxides. Chem Rev 101:1981–201710.1021/cr980129f ↗