Applicability of silicon micro-finned heat sinks for 500× concentrating photovoltaics systems
Source abstract
Abstract
In concentrating photovoltaic (CPV) applications, the sunlight is focused onto solar cells up to thousands of times and, without an adequate cooling system, the cell’s temperature can dangerously raise over the operating temperature range in few seconds. In this study, an investigation on micro-finned heat sink for high concentrating photovoltaics has been conducted. The geometry of the system and the choice of the components play an important role in the thermal management of CPV. The size of cell, as well as the optics, can strongly affect the thermal behaviour of the CPV: the effects of the CPV geometry on the thermal performance of the heat sink are experimentally investigated and discussed in order to design an optimised system for passive cooling. A micro-fin array is developed to handle the heat generated by the cell and the system is studied in different conditions to prove the applicability of this passive solution to the harsh CPV conditions. It has been found that micro-fins are a suitable solution for passive cooling at concentrations up to 500×. Moreover, this kind of solutions shows the potential to achieve high mass-specific power values, proving its competitiveness in mobile or tracked systems, such as CPV.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: solar cell performance optimization · Thin-Film Transistor Technologies · Solar Thermal and Photovoltaic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. US Energy Information Administration (2014) Levelized cost and levelized avoided cost of new generation resources in the annual energy outlook 2014
2. Tawancy HM (2012) Enhancing the photovoltaic effect in the infrared region by germanium quantum dots inserted in the intrinsic region of a silicon pin diode with nanostructure. J Mater Sci 47:93–99. doi: 10.1007/s10853-011-5728-910.1007/s10853-011-5728-9 ↗
3. Goodrich A, James T, Woodhouse M (2012) Utility-scale photovoltaic (PV) system prices in the united states: current drivers and cost-reduction opportunities10.2172/1036048 ↗
4. Ardani K, Seif D, Davidson C, Morris J, Truitt S, Torbert R, et al., (2013) Preliminary non-hardware (‘soft’) cost-reduction Roadmap for residential and small commercial solar photovoltaics, 2013-2020. doi: 10.1109/PVSC.2013.674519210.1109/PVSC.2013.6745192 ↗
5. Verlinden P, Lewandowski A, Bingham C, Kinsey G, Sherif R, Lasich J (2006) Performance and reliability of multijunction III-V modules for concentrator dish and central receiver applications, in: 2006 IEEE 4th World conf. photovolt. energy conf., IEEE. 592–597. doi:10.1109/WCPEC.2006.27952610.1109/WCPEC.2006.279526 ↗
6. Kurtz S (2009) Opportunities and challenges for development of a mature concentrating photovoltaic power industry. National Renewable Energy Laboratory, Golden
7. Luque A, Hegedus S (2003) Handbook of photovoltaic science and engineering. Wiley, Chichester. doi: 10.1002/047001400810.1002/0470014008 ↗
8. Luque A, Andreev VM (2007) Concentrator Photovoltaics. Springer, Heidelberg. doi: 10.1007/978-3-540-68798-610.1007/978-3-540-68798-6 ↗
9. Fernández EF, Almonacid F, Rodrigo P, Pérez-Higueras P (2014) Calculation of the cell temperature of a high concentrator photovoltaic (HCPV) module: a study and comparison of different methods. Sol Energy Mater Sol Cells 121:144–151. doi: 10.1016/j.solmat.2013.11.00910.1016/j.solmat.2013.11.009 ↗
10. Royne A, Dey CJ, Mills DR (2005) Cooling of photovoltaic cells under concentrated illumination: a critical review. Sol Energy Mater Sol Cells 86:451–483. doi: 10.1016/j.solmat.2004.09.00310.1016/j.solmat.2004.09.003 ↗
11. Natarajan SK, Mallick TK, Katz M, Weingaertner S (2011) Numerical investigations of solar cell temperature for photovoltaic concentrator system with and without passive cooling arrangements. Int J Therm Sci 50:2514–2521. doi: 10.1016/j.ijthermalsci.2011.06.01410.1016/j.ijthermalsci.2011.06.014 ↗
12. Do KH, Kim TH, Han Y-S, Choi B-I, Kim M-B (2012) General correlation of a natural convective heat sink with plate-fins for high concentrating photovoltaic module cooling. Sol Energy 86:2725–2734. doi: 10.1016/j.solener.2012.06.01010.1016/j.solener.2012.06.010 ↗
13. G. Timò, Results of the APOLLON Project and Concentrating Photovoltaic Perspective, Milan (IT), 2014
14. Bhushan B (2010) Introduction to Nanotechnology. Semin Cell Dev Biol 714:1–6. doi: 10.1016/j.semcdb.2010.02.009
15. Chaturvedi S, Dave PN (2013) Design process for nanomaterials. J Mater Sci 48:3605–3622. doi: 10.1007/s10853-013-7196-x10.1007/s10853-013-7196-x ↗
16. Qin D, Riggs BBA (2012) Nanotechnology: a top–down approach. In: Encyclopedia in Supramolecular chemistry, 1–9. doi:10.1081/E-ESMC-12004710410.1081/E-ESMC-120047104 ↗
17. Micheli L, Sarmah N, Luo X, Reddy KS, Mallick TK (2013) Opportunities and challenges in micro- and nano-technologies for concentrating photovoltaic cooling: a review. Renew Sustain Energy Rev 20:595–610. doi: 10.1016/j.rser.2012.11.05110.1016/j.rser.2012.11.051 ↗
18. Kim JS, Park BK, Lee JS (2008) Natural convection heat transfer around microfin arrays. Exp Heat Transf 21:55–72. doi: 10.1080/0891615070164783510.1080/08916150701647835 ↗
19. Mahmoud S, Al-Dadah R, Aspinwall DK, Soo SL, Hemida H (2011) Effect of micro fin geometry on natural convection heat transfer of horizontal microstructures. Appl Therm Eng 31:627–633. doi: 10.1016/j.applthermaleng.2010.09.01710.1016/j.applthermaleng.2010.09.017 ↗
20. Shokouhmand H, Ahmadpour A (2010) Heat transfer from a micro fin array heat sink by natural convection and radiation under slip flow regime, in: Proc. World Congr. Eng
21. Pérez-Higueras P, Muñoz E, Almonacid G, Vidal PG (2011) High concentrator photovoltaics efficiencies: present status and forecast. Renew Sustain Energy Rev 15:1810–1815. doi: 10.1016/j.rser.2010.11.04610.1016/j.rser.2010.11.046 ↗
22. Rodrigo P, Fernández EF, Almonacid F, Pérez-Higueras PJ (2014) Review of methods for the calculation of cell temperature in high concentration photovoltaic modules for electrical characterization. Renew Sustain Energy Rev 38:478–488. doi: 10.1016/j.rser.2014.06.00810.1016/j.rser.2014.06.008 ↗
23. International Electrotechnical Commission (2007) Concentrator photovoltaic (CPV) modules and assemblies—design qualification and type approval (IEC 62108 ed1.0)
24. Sierra C, Vázquez AJ (2005) High solar energy concentration with a Fresnel lens. J Mater Sci 40:1339–1343. doi: 10.1007/s10853-005-0562-610.1007/s10853-005-0562-6 ↗
25. Mittelman G, Dayan A, Dado-Turjeman K, Ullmann A (2007) Laminar free convection underneath a downward facing inclined hot fin array. Int J Heat Mass Transf 50:2582–2589. doi: 10.1016/j.ijheatmasstransfer.2006.11.03310.1016/j.ijheatmasstransfer.2006.11.033 ↗
26. Incropera FP, DeWitt DP, Bergman TL, Lavine AS (2007) Fundamentals of heat and mass transfer. Wiley, Hoboken
27. Mills A (1999) Basic heat and mass transfer, 2nd edn. Prentice Hall, Upper saddle river
28. Kulkarni DP, Das DK (2005) Analytical and numerical studies on microscale heat sinks for electronic applications. Appl Therm Eng 25:2432–2449. doi: 10.1016/j.applthermaleng.2004.12.01010.1016/j.applthermaleng.2004.12.010 ↗
29. AZURSPACE Solar Power GmbH, Enhanced Fresnel Assembly—EFA, (2010)
30. Micheli L, Sarmah N, Luo X, Reddy KS, Mallick TK (2014) Design of a 16-cell densely-packed receiver for high concentrating photovoltaic applications. Energy Procedia 54:185–198. doi: 10.1016/j.egypro.2014.07.26210.1016/j.egypro.2014.07.262 ↗
31. Escher W, Ghannam R, Khalll A, Paredes S, Michel B (2010) Advanced liquid cooling for concentrated photovoltaic electro-thermal co-generation, in: Therm. Issues Emerg. Technol., IEEE, Cairo, pp.9–1710.1109/THETA.2010.5766374 ↗
32. Martinelli G, Stefancich M (2007) Solar cell cooling In: Concentrated photovoltaics, 7(chapter no), Springer, Hiedelberg : pp. 133–149
33. Escher W, Paredes S, Zimmermann S, Ong CL, Ruch P, Michel B (2012) Thermal management and overall performance of a high concentration PV 239:239–243. doi: 10.1063/1.4753877
34. Paredes S, Escher W, Ghannam R, Ong CL, Michel B(2012) Low thermal resistance hcpv multi chip receiver for thermal energy reuse, in: 28th Eur. Photovolt. Sol. Energy Conf. Exhib
35. Micheli L, Reddy K, Mallick TK (2015) Plate micro-fins in natural convection: experimental study on thermal effectiveness and mass usage In: Int. Conf. Polygeneration Technol. Perspect. (ICP 2015), Chennai (India)
36. Suryanarayana NV (1995) Engineering heat transfer. West Publishing Company, Eagan
37. Blumenfeld P, Foresi J, Lang Y, Nagyvary J (2010) Thermal management and engineering economics in cpv design. Emcore Corporation, Albuquerque
38. Araki K, Uozumi H, Yamaguchi M (2002). A simple passive cooling structure and its heat analysis for 500× concentrator PV module, Conf. Rec. Twenty-Ninth IEEE Photovolt. Spec. Conf. (n.d.) 1568–1571. doi: 10.1109/PVSC.2002.119091310.1109/PVSC.2002.1190913 ↗