Effective role of vibrational annealing in enhancing room temperature physical properties of Co doped ZnO nanoparticles by using novel TVA technique

Well-annealed nanocrystalline semiconductor materials in pellet or thin film form, composed of small grains with a high surface-to-volume ratio, are considered as promising candidates for multiple device applications. However, no such method is available yet that can control the grain size of such samples during heat treatment. In this present work, a novel thermo-vibrational annealing (TVA) setup for processing nanocrystalline materials was designed and fabricated in-house. Here both thermal and mechanical vibrational energy were simultaneously applied to the sample during annealing, followed by vibrational dry quenching in the presence of an inert gas environment. Co-doped ZnO pellets were synthesized by chemical route pyrophoric method followed by annealing at 800 °C for 4 h using this set up. For comparison, one pellet was annealed with vibration with calibrated vibration at a speed of 360 rpm, and another pellet was annealed without vibration. X-ray diffraction (XRD), Raman and Fourier transform Infrared (FTIR) spectroscopic studies showed the formation of a single crystalline phase with hexagonal wurtzite structure of both the samples and the proper incorporation of Co2+ ions into the ZnO matrix without any impurity phases, which was also confirmed by energy dispersive X-ray (EDX) spectroscopy studies. Scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM) studies confirmed the decrease in average grain and particle size of the sample when processed with the TVA setup. Ultraviolet–Visible spectra showed that the bandgap energy of the Co-doped ZnO sample varies inversely with particle size. Hall-effect measurements demonstrated the semiconducting nature of both samples with n-type charge carriers. The presence of Co2+ ions in the wurtzite ZnO lattice was confirmed by X-ray photoelectron spectroscopy (XPS). The magnetic properties were studied using a SQUID magnetometer, which confirmed that a Co doped ZnO sample annealed with the TVA technique exhibit better room temperature ferromagnetism properties compared to sample annealed without vibration. Based on these studies, it was believed that the sample annealed by mechanical vibrational energy with vibrational dry quenching has a great influence on several physical properties of any material and hence Co doped ZnO sample processed with this TVA technique can be used as a promising candidate for multiple sensor and magnetic storage devices.