Laser cladding FeCrCoNiTiAl high entropy alloy coatings reinforced with self-generated TiC particles
Source abstract
Abstract
Self-generated TiC particle reinforced FeCrCoNiTiAlBC high entropy alloy coating with a thickness of 1.5 mm was cladded on the surface of 45# steel by a semiconductor laser. Results show that fine grain TiC particles have been self-generated in the coating with the increase of the additions of C and B elements from 2 to 4 wt. %. The base crystal structure of the coating was found to change from a body-centered-cubic solid solution to a face-centered-cubic (FCC) solid solution with the increase in the addition of B and C. The TiC particles have irregular quadrilateral and flower morphologies, and the average hardness of the coating is 560 HV. The cracking tendency of the coating has been significantly reduced, which is attributed to the formation of the self-generated fine TiC particles and the FCC solid solution matrix.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Northeastern University Key Laboratory for Anisotropy and Texture of Materials, Ministry of Education, School of Materials and Engineering, , Shenyang, Liaoning 110819, China
References (19)
Show source-provided references
1. Phase evolution and properties of Al2CrFeNiMox high-entropy alloys coatings by laser cladding10.1007/s11666-015-0303-6 ↗
2. Direct laser fabrication process with coaxial powder projection of 316L steel. Geometrical characteristics and microstructure characterization of wall structures10.1016/j.optlaseng.2012.07.002 ↗
3. Microstructure and mechanical behavior of laser additive manufactured AISI316 stainless steel stringers10.1016/j.matdes.2013.10.016 ↗
4. Laser metal deposition of TiC/Inconel 718 composites with tailored interfacial microstructures10.1016/j.optlastec.2013.05.011 ↗
5. Parametric study of development of Inconel-steel functionally graded materials by laser direct metal deposition10.1016/j.matdes.2013.08.079 ↗
6. Microstructural characterisation of high-entropy alloy AlCoCrFeNi fabricated by laser engineered net shaping10.1016/j.jallcom.2015.05.144 ↗
7. The influence of laser and powder defocusing characteristics on the surface quality in laser direct metal deposition10.1016/j.optlastec.2011.07.013 ↗
8. Preparation of a novel Ni/Co-based alloy gradient coating on surface of the copper alloy by laser10.1016/j.apsusc.2011.09.101 ↗
9. Microstructure and micro-hardness of in situ synthesized TiC particles reinforced Fe-based alloy composite coating by laser cladding10.1002/mawe.201400188 ↗
10. Microstructure and mechanical properties of Ni-based composite coatings reinforced by in situ synthesized TiB2+TiC by laser cladding10.1007/s12613-013-0693-8 ↗
11. Microstructure and wear resistance of in situ NbC particles reinforced Ni-based alloy composite coating by laser cladding10.1007/s11595-012-0443-1 ↗
12. Synthesis and characterization of FeCoNiCrCu high-entropy alloy coating by laser cladding10.1016/j.matdes.2010.12.001 ↗
13. Microstructure and properties of Al2CrFeCoCuTiNix high-entropy alloys prepared by laser cladding10.1016/j.jallcom.2012.11.100 ↗
14. Microstructure and properties of 6FeNiCoSiCrAlTi high-entropy alloy coating prepared by laser cladding10.1016/j.apsusc.2010.09.084 ↗
15. Microstructure and properties of A12CrFeCoCuTiNi high-entropy alloys prepared by laser cladding10.1016/j.jallcom.2012.11.100 ↗
16. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
17. Refractory high-entropy alloys10.1016/j.intermet.2010.05.014 ↗
18. Synthesis and characterization of FeCoCrAlCu high-entropy alloy coating by laser surface alloying10.1016/j.surfcoat.2014.12.013 ↗
19. FeCoNiAlTiCrSi high entropy alloy coating prepared by laser cladding