Progress on Large-area Organic-inorganic Hybrid Perovskite Films and Its Photovoltaic Application
Source abstract
Abstract
Cells, PSCs)实验室器件(＜1 cm 2 )，大面积(1~10 cm 2 )器件，迷你模组级器件(10~800 cm 2 )和模组级器件(＞800 cm 2 ) 的最高认证 PCE 也已分别提升至 26.10%、24.35%、22.40%、18.60%。随着PSCs 面积扩大，PCE 急剧下降，这主 要是因为制备方法的局限性和难以获得高质量的大面积钙钛矿薄膜。实验室器件常采用的旋涂法难以应用到实际
Only a short abstract or summary was supplied by the source.
Source: openalex_inverted_index · Quality: short
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Polyoxometalates: Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. NREL. Best research-cell efficiency chart [2023-12-13]. https://www.nrel.gov/pv/cell-efficiency.html.
2. GREEN M A, DUNLOP E D, YOSHITA M, et al. Solar cell efficiency tables (version 62). Prog. Photovoltaics, 2023, 31(7): 651.10.1002/pip.3726 ↗
3. BU T L, ONO L K, LI J, et al. Modulating crystal growth of formamidinium-caesium perovskites for over 200 cm2 photovoltaic sub-modules. Nat. Energy, 2022, 7(6): 528.10.1038/s41560-022-01039-0 ↗
4. LIN H, YANG M, RU X N, et al. Silicon heterojunction solar cells with up to 26.81% efficiency achieved by electrically optimized nanocrystalline-silicon hole contact layers. Nat. Energy, 2023, 8(8): 789.10.1038/s41560-023-01255-2 ↗
5. LEE J, LEE D, JEONG D, et al. Control of crystal growth toward scalable fabrication of perovskite solar cells. Adv. Funct. Mater., 2019, 29(47): 1807047.10.1002/adfm.201807047 ↗
6. 关英翔. 大面积钙钛矿型太阳能电池及组件制作工艺. 北京: 北京信息科技大学硕士学位论文, 2015.
7. RONG Y G, HOU X M, HU Y, et al. Synergy of ammonium chloride and moisture on perovskite crystallization for efficient printable mesoscopic solar cells. Nat. Commun., 2017, 8: 14555.10.1038/ncomms14555 ↗
8. PARIDA B, SINGH A, SOOPY A K K, et al. Recent developments in upscalable printing techniques for perovskite solar cells. Adv. Sci., 2022, 9(14): 220308.10.1002/advs.202200308 ↗
9. 丁建宁. 新型薄膜太阳能电池. 北京: 化学工业出版社, 2018: 81-82.
10. ZHANG H, ZHAO C X, YAO J X, et al. Dopant-free NiOx nanocrystals: a low-cost and stable hole transport material for commercializing perovskite optoelectronics. Angew. Chem. Int. Ed., 2023, 62(24): e202219307.10.1002/anie.202219307 ↗
11. LIU C, YANG Y, CHEN H, et al. Bimolecularly passivated interface enables efficient and stable inverted perovskite solar cells. Science, 2023, 382(6672): 810.10.1126/science.adk1633 ↗
12. WU X, GAO D P, SUN X L, et al. Backbone engineering enables highly efficient polymer holetransporting materials for inverted perovskite solar cells. Adv. Mater., 2022, 35(12): 2208431.10.1002/adma.202208431 ↗
13. CHEN Y, LIN P, CAI B, et al. Research progress of inorganic hole transport materials in perovskite solar cells. J. Inorg. Mater., 2023, 38(9): 991.10.15541/jim20230105 ↗
14. ZHU C T, GAO J, CHEN T, et al. Intrinsic thermal stability of inverted perovskite solar cells based on electrochemical deposited PEDOT. J. Energy Chem., 2023, 83: 445.10.1016/j.jechem.2023.04.039 ↗
15. PARK B W, KWON H W, LEE Y H, et al. Stabilization of formamidinium lead triiodide α-phase with isopropylammonium chloride for perovskite solar cells. Nat. Energy, 2021, 6(8): 419.10.1038/s41560-021-00802-z ↗
16. LI J B, MUNIR R, FAN Y Y, et al. Phase transition control for high-performance blade-coated perovskite solar cells. Joule, 2(7): 1313.10.1016/j.joule.2018.04.011 ↗
17. ZHANG J W, BU T L, LI J, et al. Two-step sequential blade-coating of high quality perovskite layers for efficient solar cells and modules. J. Mater. Chem. A, 2020, 8(17): 8447.10.1039/D0TA02043E ↗
18. WEN Y T, LI J, GAO X F, et al. Two-step sequential blade-coating large-area FA-based perovskite thin film via a controlled PbI2 microstructure. Acta Phys.-Chim. Sin., 2023, 32(2): 2203048.10.3866/PKU.WHXB202203048 ↗
19. TAN L G, ZHOU J J, ZHAO X, et al. Combined vacuum evaporation and solution process for high-efficiency large‐area perovskite solar cells with exceptional reproducibility. Adv. Mater., 2023, 35(3): 2205027.10.1002/adma.202205027 ↗
20. 杨志春, 吴狄, 剡晓波, 等. 大面积钙钛矿薄膜制备技术的研究进展. 材料导报, 2021, 35(1): 1046.
21. LI D Y, ZHANG D Y, LIM K S, et al. A review on scaling up perovskite solar cells. Adv. Funct. Mater., 2021, 31(12): 2008621.10.1002/adfm.202008621 ↗
22. CHEN Y J, WU H J, MA J J, et al. Droplet manipulation and crystallization regulation in inkjet-printed perovskite film formation. CCS Chem., 2022, 4(5): 1465.10.31635/ccschem.022.202101583 ↗
23. CHEN C S, CHEN J X, HAN H C, et al. Perovskite solar cells based on screen-printed thin films. Nature, 2022, 612(7939): 266.10.1038/s41586-022-05346-0 ↗
24. LI J, WANG H, CHIN X Y, et al. Highly efficient thermally co-evaporated perovskite solar cells and mini-modules. Joule, 2020, 4(5): 1035.10.1016/j.joule.2020.03.005 ↗
25. LEYDEN M R, JIANG Y, QI Y B, et al. Chemical vapor deposition grown formamidinium perovskite solar modules with high steady state power and thermal stability. J. Mater. Chem. A, 2016, 4(34): 13125.10.1039/C6TA04267H ↗
26. LI X, BI D Q, YI C Y, et al. A vacuum flash-assisted solution process for high-efficiency large-area perovskite solar cells. Science, 2016, 353(6294): 58.10.1126/science.aaf8060 ↗
27. SANCHEZ S, PFEIFER L, VACHOPOUOUS N, et al. Rapid hybrid perovskite film crystalization form solution. Chem. Sov. Rev., 2021, 50(12): 7108.10.1039/D0CS01272F ↗
28. LIU C, CHENG Y B, GE Z Y. Understanding of perovskite crystal growth and film formation in scalable deposition processes. Chem. Sov. Rev., 2020, 49(6): 1653.10.1039/C9CS00711C ↗
29. GEISTERT K, TERNES S, RITZER D B, et al. Controlling thin film morphology formation during gas quenching of slot-die coated perovskite solar modules. ACS Appl. Mater. Interfaces, 2023, 15(45): 52519.10.1021/acsami.3c11923 ↗
30. SHEN Z C, HAN Q F, LUO X H, et al. Crystal-array-assisted growth of a perovskite absorption layer for efficient and stable solar cells. Energy Environ. Sci., 2022, 15(3): 1078.10.1039/D1EE02897A ↗
31. DUNLAP-SHOHL W A, ZHOU Y Y, PADTURE N P, et al. Synthetic approaches for halide perovskite thin films. Chem. Rev., 2019, 119(5): 3193.10.1021/acs.chemrev.8b00318 ↗
32. ZHENG Z W, WANG S Y, HU Y, et al. Development of formamidinium lead iodide-based perovskite solar cells: efficiency and stability. Chem. Sci., 2022, 13(8): 2167.10.1039/D1SC04769H ↗
33. MUSCARELLA L A, EHRLER B. The influence of strain on phase stability in mixed-halide perovskites. Joule, 2022, 6(9): 2016.10.1016/j.joule.2022.07.005 ↗
34. LIU X H, CHEN M, ZHANG Y, et al. High-efficiency perovskite photovoltaic modules achieved via cesium doping. Chem. Eng. J., 2022, 431(4): 133713.10.1016/j.cej.2021.133713 ↗
35. XIAO K, LIN H Y, ZHANG M, et al. Scalable processing for realizing 21.7%-efficient all-perovskite tandem solar modules. Science, 2022, 376(6594): 762.10.1126/science.abn7696 ↗
36. SUN S J, TIIHONEN A, OVIEDO F, et al. A data fusion approach to optimize compositional stability of halide perovskites. Matter, 2021, 4(4): 1305.10.1016/j.matt.2021.01.008 ↗
37. SALIBA M, MATSUI T, DOMANSKI K, et al. Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance. Science, 2016, 354(6309): 206.10.1126/science.aah5557 ↗
38. ZHAO Y, MA F, QU Z H, et al. Inactive (PbI2)2RbCl stabilizes perovskite films for efficient solar cells. Science, 2022, 377(6605): 531.10.1126/science.abp8873 ↗
39. CHANG J H, FENG E M, LI H Y, et al. Crystallization and orientation modulation enable highly efficient doctor-bladed perovskite solar cells. Nano-Micro Letter, 2023, 15(issue): 164.10.1007/s40820-023-01138-x ↗
40. DENG Y H, XU S, CHEN S S, et al. Defect compensation in formamidinium-caesium perovskites for highly efficient solar mini- modules with improved photostability. Nat. Energy, 2021, 6(6): 633.10.1038/s41560-021-00831-8 ↗
41. JACOBSSON T J, CORREA-BAEBA J P, NARAKI E H, et al. Unreacted PbI2 as a double-edged sword for enhancing the performance of perovskite solar cells. J. Am. Chem. Soc., 2016, 138(32): 10331.10.1021/jacs.6b06320 ↗
42. MACPHERSON S, DOHERTY T A S, WINCHESTAR A J, et al. Local nanoscale phase impurities are degradation sites in halide perovskite. Nature, 2022, 607(7918): 294.10.1038/s41586-022-04872-1 ↗
43. LIANG J W, HU X Z, WANG C, et al. Origins and influences of metallic lead in perovskite solar cells. Joule, 6(4): 816.10.1016/j.joule.2022.03.005 ↗
44. CHAO L F, NIU T T, GAO W Y, et al. Solvent engineering of the precursor solution toward large-area production of perovskite solar cells. Adv. Mater., 2021, 33(14): 2005410.10.1002/adma.202005410 ↗
45. BU T L, LI J, LI H Y, et al. Lead halide-templated crystallization of methylamine-free perovskite for efficient photovoltaic modules. Science, 2021, 372(6548): 1327.10.1126/science.abh1035 ↗
46. CHEN S S, DAI X Z, XU S, et al. Stabilizing perovskite-substrate interfaces for high-performance perovskite modules. Science, 2021, 373(6557): 902.10.1126/science.abi6323 ↗
47. LI H Y, BU T, LI J, et al. Ink engineering for blade coating FA-dominated perovskites in ambient air for efficient solar cells and modules. ACS Appl. Mater. Interfaces, 2021, 13(16): 18724.10.1021/acsami.1c00900 ↗
48. LEE D K, LIM K S, LEE J W, et al. Scalable perovskite coating via anti-solvent-free Lewis acid-base adduct engineering for efficient perovskite solar modules. J. Mater. Chem. A, 2021, 9(5): 3018.10.1039/D0TA10366G ↗
49. YANG Z C, ZHANG W J, WU S H, et al. Slot-die coating large-area formamidinium-cesium perovskite film for efficient and stable parallel solar module. Adv. Sci., 2021, 7(18): eabg3749.10.1126/sciadv.abg3749 ↗
50. CHUNG J, KIM S, LI Y, et al. Engineering perovskite precursor inks for scalable production of high-efficiency perovskite photovoltaic modules. Adv. Energy Mater., 2023, 13(22): 2300595.10.1002/aenm.202300595 ↗
51. YOO J W, JANG J H, KIM U, et al. Efficient perovskite solar mini-modules fabricated via bar-coating using 2-methoxyethanol- based formamidinium lead tri-iodide precursor solution. Joule, 2021, 5(9): 2420.10.1016/j.joule.2021.08.005 ↗
52. LI J Z, DAGAR J, SHARGAIEVA O, et al. 20.8% slot-die coated MAPbI3 perovskite solar cells by optimal DMSO-content and age of 2-ME based precursor inks. Adv. Energy Mater., 2021, 11(10): 2003460.10.1002/aenm.202003460 ↗
53. LI J Z, DAGAR J, SHARGAIEVA O, et al. Ink design enabling slot-die coated perovskite solar cells with >22% power conversion efficiency, micro-modules, and 1 year of outdoor performance evaluation. Adv. Energy Mater., 2022, 13(33): 2203898.10.1002/aenm.202203898 ↗
54. DENG Y H, BRACKE C H V, DAI X Z, et al. Tailoring solvent coordination for high-speed, room-temperature blading of perovskite photovoltaic films. Sci. Adv., 2019, 5(12): eaax7537.10.1126/sciadv.aax7537 ↗
55. YUAN L H, CHEN X N, GUO X M, et al. Volatile perovskite precursor ink enables window printing of phase-pure FAPbI3 perovskite solar cells and modules in ambient atmosphere. Angew. Chem. Int. Ed., 2024, 63(7): e202316954.10.1002/anie.202316954 ↗
56. NOEL N K, HABISREYTINGER S N, WENGER B, et al. A low viscosity, low boiling point, clean solvent system for the rapid crystallisation of highly specular perovskite films. Energy Environ. Sci., 2016, 10(1): 145.10.1039/C6EE02373H ↗
57. LIANG Q, LIU K, SUN M, et al. Manipulating crystallization kinetics in high-performance blade-coated perovskite solar cells via cosolvent-assisted phase transition. Adv. Mater., 2022, 34(16): 2200276.10.1002/adma.202200276 ↗
58. ZHAI P, REN L X, LI S Q, et al. Light modulation strategy for highest-efficiency water-processed perovskite solar cells. Matter, 2022, 5(12): 4450.10.1016/j.matt.2022.09.002 ↗
59. WANG W, ZHOU J, TANG W. Passivation strategies of perovskite film defects for solar cells. J. Inorg. Mater., 2022, 37(2): 129.10.15541/jim20210117 ↗
60. TONG G Q, SON D, ONO L K, et al. Scalable fabrication of >90 cm2 perovskite solar modules with >1000 h operational stability based on the intermediate phase strategy. Adv. Energy Mater., 2021, 11(10): 2003712.10.1002/aenm.202003712 ↗
61. ZHOU T, XU Z Y, WANG R, et al. Crystal growth regulation of 2D/3D perovskite films for solar cells with both high efficiency and stability. Adv. Mater., 2022, 34(17): 2200705.10.1002/adma.202200705 ↗
62. MING Y, HU Y, MEI A, et al. Application of lead acetate additive for printable perovskite solar cell. J. Inorg. Mater., 2022, 37(2): 197.10.15541/jim20210538 ↗
63. CHEN R H, WU Y Z, WANG Y K, et al. Crown ether-assisted growth and scaling up of FACsPbI3 films for efficient and stable perovskite solar modules. Adv. Funct. Mater., 2021, 31(11): 2008760.10.1002/adfm.202008760 ↗
64. HUANG H H, LIU Q H, TSAI H, et al. A simple one-step method with wide processing window for high-quality perovskite mini-module fabrication. Joule, 2021, 5(4): 958.10.1016/j.joule.2021.02.012 ↗
65. HUANG Z J, BAI Y, HUANG X D, et al. Anion-π interactions supress phase impurities in FAPbI3 solar cells. Nature, 2023, 623(2023): 531.10.1038/s41586-023-06637-w ↗
66. MENG Y Y, WANG Y L, LIU C, et al. Epitaxial growth of α-FAPbI3 at a well-matched heterointerface for efficient perovskite solar cells and solar modules. Adv. Mater., 2024, 36(6): 2309208.10.1002/adma.202309208 ↗
67. MIAO Y, REN M, WANG H F, et al. Surface termination on unstable methylammonium-based perovskite using a steric barrier for improved perovskite solar cells. Angew. Chem. Int. Ed., 2023, 62(51): e202312726.10.1002/anie.202312726 ↗
68. LIU D C, CHEN C, WANG X Z, et al. Enhanced quasi-Fermi level splitting of perovskite solar cells by universal dual-functional polymer. Adv. Mater., 2023, 36(13): 2310962.10.1002/adma.202310962 ↗