journal article·2025-06-12Open access

Stress Distribution on Endodontically Treated Anterior Teeth Restored via Different Ceramic Materials with Varying Post Lengths Versus Endocrown—A 3D Finite Element Analysis

Mai Soliman, Nawaf Almutairi, Ali Alenezi, Raya Alenezi, Amal Abdallah A. Abo-Elmagd, Manal M. Abdelhafeez

Abstract

Objective: This study aims to evaluate the stress distribution on endodontically treated anterior teeth restored using different restorative materials and different post lengths versus endocrowns employing finite element analysis (FEA). Methods: An extracted human central incisor tooth with a fully formed apex was scanned using high-resolution cone beam computed tomography (CBCT) to generate 3D finite element models. Six models of restorations of badly destructed central incisor were grouped according to the type of ceramic material and post length versus endocrown restorations. Group V-L: Vita Enamic, long post (10 mm intra-radicular), Group C-L: Celtra Duo, long post (10 mm intra-radicular), Group V-Sh: Vita Enamic, short post (3 mm intra-radicular), Group C-Sh: Celtra Duo, short post (3 mm intra-radicular), Group V-E: Vita Enamic endocrown (3 mm intra-radicular), and Group C-E: Celtra Duo endocrown (3 mm intra-radicular). A static load of 200 N was applied to the palatal surface at a 45 degree angle to the tooth’s long axis. The maximum equivalent von Mises stress and maximum principal stress were analyzed at four locations: the finish line, coronal third of the root (12 mm from the apex), middle third of the root (8 mm from the apex), and apical third of the root (4 mm from the apex). Results: Group C-L exhibited the highest maximum VM stress and PS at the finish line, in addition to the highest maximum VM stress and PS at the root apical third, while group C-Sh reported the least maximum VM stress at the root apical third among the groups. All Celtra Duo groups reported higher maximum VM stress than the corresponding groups of Vita Enamic at the finish line and root coronal thirds. However, at the root middle and apical thirds, both materials recorded similar stresses. Conclusions: Short posts and Vita Enamic endocrowns showed minimal stress, especially at the finish line, while long posts increased stress and fracture risk. The findings support conservative restorations without posts, although clinical validation is needed to confirm their long-term effectiveness and safety.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Endodontics and Root Canal Treatments · Dental Health and Care Utilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Clinical Dental Sciences, College of Dentistry, Princess Nourah bint Abdulrahman University, Riyadh 11671, Saudi Arabia

Department of Conservative Dental Sciences, College of Dentistry, Qassim University, Buraydah 52571, Saudi Arabia

Department of Prosthetic Dental Sciences, College of Dentistry, Qassim University, Buraydah 52571, Saudi Arabia

General Dentistry, College of Dentistry, Qassim University, Buraydah 52571, Saudi Arabia

Department of Fixed Prosthodontics, Faculty of Dental Surgery, MUST University, 6th of October City, Giza 12566, Egypt

Funding

Princess Nourah bint Abdulrahman University Researchers Supporting Project

References (77)

Show source-provided references
1. Post Placement and Restoration of Endodontically Treated Teeth: A Literature Review10.1097/00004770-200405000-00001 ↗
2. Restoration of Endodontically Treated Teeth10.1016/j.cden.2003.12.011 ↗
3. Restoration of Endodontically Treated Teeth: Review and Treatment Recommendations
4. Restoration of Endodontically Treated Teeth10.1038/sj.bdj.2014.198 ↗
5. Influence of the Coronal Restoration on the Outcome of Endodontically Treated Teeth10.1080/00016357.2019.1640390 ↗
6. Cook, R.D., Malkus, D.S., Plesha, M.E., and Witt, R.J. (2002). Concepts and Applications of Finite Element Analysis, John Wiley & Sons. [4th ed.].
7. Zarow, M., Vadini, M., Chojnacka-Brozek, A., Szczeklik, K., Milewski, G., Biferi, V., D’Arcangelo, C., and De Angelis, F. (2020). Effect of Fiber Posts on Stress Distribution of Endodontically Treated Upper Premolars: Finite Element Analysis. Nanomaterials, 10.10.3390/nano10091708 ↗
8. Applications of Finite Element Analysis in Endodontics: A Systematic Review and Meta-Analysis10.4103/jpbs.jpbs_393_24 ↗
9. Comparison of Fracture Resistance Between Cast Posts and Fiber Posts: A Meta-Analysis of Literature10.1016/j.joen.2012.09.026 ↗
10. Anatomical Post Design Meets Quartz Fiber Technology: Rationale and Case Report
11. Survival Rates of Teeth with Primary Endodontic Treatment After Core/Post and Crown Placement10.1016/j.joen.2017.08.034 ↗
12. Chen, S., Hong, X., Ye, Z., Wu, M., Chen, L., Wu, L., and Zhao, S. (2023). The Effect of Root Canal Treatment and Post-Crown Restorations on Stress Distribution in Teeth with Periapical Periodontitis: A Finite Element Analysis. BMC Oral Health, 23.10.1186/s12903-023-03612-9 ↗
13. Clinical Evaluation of Fiber-Reinforced Epoxy Resin Posts and Cast Post and Cores
14. A Systematic Review of Dowel (Post) and Core Materials and Systems10.1111/j.1532-849X.2009.00472.x ↗
15. Stress Analysis of Endodontically Treated Anterior Teeth Restored with Different Types of Post Material10.4012/dmj.25.145 ↗
16. Dental Fiber-Post Resin Base Material: A Review10.4047/jap.2014.6.1.60 ↗
17. Ouldyerou, A., Mehboob, H., Mehboob, A., Merdji, A., Aminallah, L., Mukdadi, O.M., Barsoum, I., and Junaedi, H. (2023). Biomechanical Performance of Resin Composite on Dental Tissue Restoration: A Finite Element Analysis. PLoS ONE, 18.10.1371/journal.pone.0295582 ↗
18. Clinical Studies of Fiber Posts: A Literature Review
19. Current Perspectives on Post Systems: A Literature Review10.1111/j.1834-7819.2010.01298.x ↗
20. Biomechanical Considerations for the Restoration of Endodontically Treated Teeth: A Systematic Review of the Literature—Part 1. Composition and Micro- and Macrostructure Alterations
21. A Systematic Review of Single Crowns on Endodontically Treated Teeth10.1016/j.jdent.2007.07.004 ↗
22. Composite vs Ceramic Computer-Aided Design/Computer-Assisted Manufacturing Crowns in Endodontically Treated Teeth: Analysis of Marginal Adaptation10.2341/12-208-L ↗
23. Lin, J., Lin, Z., and Zheng, Z. (2020). Effect of Different Restorative Crown Design and Materials on Stress Distribution in Endodontically Treated Molars: A Finite Element Analysis Study. BMC Oral Health, 20.10.1186/s12903-020-01214-3 ↗
24. Evaluation of the Use of PEEK Material in Post-Core and Crown Restorations Using Finite Element Analysis
25. Huang, M., Wang, B., Zhang, K., Yan, X., Chen, Z., and Zhang, X. (2024). Comparative Analysis of Stress Distribution in Residual Roots with Different Canal Morphologies: Evaluating CAD/CAM Glass Fiber and Other Post-Core Materials. BMC Oral Health, 24.10.1186/s12903-024-04109-9 ↗
26. Wear of Ceramic and Antagonist—A Systematic Evaluation of Influencing Factors In Vitro10.1016/j.dental.2007.06.016 ↗
27. Ceramic Materials in Dentistry: Historical Evolution and Current Practice10.1111/j.1834-7819.2010.01299.x ↗
28. Intracoronal Reinforcement and Coronal Coverage: A Study of Endodontically Treated Teeth10.1016/0022-3913(84)90376-7 ↗
29. The Effect of Post Type and Length on the Fracture Resistance of Endodontically Treated Teeth10.1016/S0022-3913(09)60024-X ↗
30. Fracture Resistance of Endodontically Treated Teeth Restored with Different Intraradicular Posts with Different Lengths
31. Fracture Resistance of Endodontically Treated Teeth Restored with Glass Fiber Posts of Different Lengths10.1016/j.prosdent.2013.09.013 ↗
32. 10-Year Survival Evaluation for Glass-Fiber-Supported Post Endodontic Restoration: A Prospective Observational Clinical Study10.1016/j.joen.2012.01.003 ↗
33. Clinical Evaluation of Adhesively Placed Cerec Endocrowns After 2 Years—Preliminary Results
35. Endocrowns: A Systematic Review10.1016/j.prosdent.2019.04.009 ↗
36. Comparison of Fracture Strength of Endocrowns and Glass Fiber Post-Retained Conventional Crowns10.2341/11-105-L ↗
37. The Endocrown: An Alternative Approach for Restoring Extensively Damaged Molars10.1111/jerd.12065 ↗
38. Survival and Success of Endocrowns: A Systematic Review and Meta-Analysis10.1016/j.prosdent.2020.01.011 ↗
39. Occlusal Loading Effect on Stress Distribution of Endodontically Treated Teeth: Finite Element Analysis Study
40. The Effect of Resection Angle on Stress Distribution after Root-End Surgery
41. Impact of Endodontic Kinematics on Stress Distribution During Root Canal Treatment: Analysis of Photoelastic Stress10.1016/j.joen.2021.10.003 ↗
42. Push-Out Bond Strength of Fiber Posts to Overflared Root Canals in Different Root Regions: Effect of Reinforcement Techniques
43. 3-D finite element analysis of the effects of post location and loading location on stress distribution in root canals of the mandibular 1st molar10.1590/1678-7757-2016-0406 ↗
44. Bucchi, C., Del Fabbro, M., and Marce-Nogue, J. (2022). Orthodontic Loads in Teeth after Regenerative Endodontics: A Finite Element Analysis of the Biomechanical Performance of the Periodontal Ligament. Appl. Sci., 12.10.3390/app12147063 ↗
45. Syed, A.U.Y., Rokaya, D., Shahrbaf, S., and Martin, N. (2021). Three-Dimensional Finite Element Analysis of Stress Distribution in a Tooth Restored with Full Coverage Machined Polymer Crown. Appl. Sci., 11.10.3390/app11031220 ↗
46. The role of periodontal ligament elasticity in periodontal changes—Numerical simulation10.37897/RJS.2022.1.5 ↗
47. Comparison of Stress Distribution in Teeth Restored with Fiber Post and Dentin Post by Applying Orthotropic Properties: A Three-Dimensional Finite Element Analysis10.4103/JCD.JCD_551_20 ↗
48. Fracture resistance and stress distribution in endodontically treated maxillary premolars restored with composite resin10.1111/j.1532-849X.2007.00258.x ↗
49. Dentsply Sirona (2017). Celtra® Duo: Zirconia-Reinforced Lithium Silicate (ZLS) Block FactFile, Dentsply Sirona Inc.
50. Biomechanical Simulation of Temporomandibular Joint Replacement (TMJR) Devices: A Scoping Review of the Finite Element Method10.1016/j.ijom.2018.02.005 ↗
51. Alp, Ş., Gulec Alagoz, L., and Ulusoy, N. (2020). Effect of Direct and Indirect Materials on Stress Distribution in Class II MOD Restorations: A 3D-Finite Element Analysis Study. Biomed Res. Int., 2020.10.1155/2020/7435054 ↗
52. Cantó-Navés, O., Medina-Gálvez, R., Marimon, X., Ferrer, M., Figueras-Álvarez, Ó., and Cabratosa-Termes, J. (2021). A 3D Finite Element Analysis Model of Single Implant-Supported Prosthesis Under Dynamic Impact Loading for Evaluation of Stress in the Crown, Abutment and Cortical Bone Using Different Rehabilitation Materials. Materials, 14.10.3390/ma14133519 ↗
53. Lee, J.-H., Jang, H.Y., and Lee, S.Y. (2021). Finite Element Analysis of Dental Implants with Zirconia Crown Restorations: Conventional Cement-Retained vs. Cementless Screw-Retained. Materials, 14.10.3390/ma14102666 ↗
54. Cicciù, M. (2020). Bioengineering Methods of Analysis and Medical Devices: A Current Trends and State of the Art. Materials, 13.10.3390/ma13030797 ↗
55. Mechanical and Thermal Stress Analysis of Hybrid Ceramic and Lithium Disilicate-Based Ceramic CAD-CAM Inlays Using 3-D Finite Element Analysis10.14295/bds.2021.v24i3.2453 ↗
56. Ausiello, P., Dal Piva, A.M., Borges, A.L.S., Lanzotti, A., Zamparini, F., Epifania, E., and Tribst, J.P.M. (2021). Effect of Shrinking and No Shrinking Dentine and Enamel Replacing Materials in Posterior Restoration: A 3D-FEA Study. Appl. Sci., 11.10.3390/app11052215 ↗
57. Mechanical Performance of Endodontic Restorations with Prefabricated Posts: Sensitivity Analysis of Parameters with a 3D Finite Element Model10.1080/10255842.2012.737459 ↗
58. A Study on Stress Distribution to Cement Layer and Root Dentin for Post and Cores Made of CAD/CAM Materials with Different Elasticity Modulus in the Absence of Ferrule10.4317/jced.56002 ↗
59. Influence of Alveolar Bone Loss and Cement Layer Thickness on the Biomechanical Behavior of Endodontically Treated Maxillary Incisors: A 3-Dimensional Finite Element Analysis10.1016/j.joen.2016.11.020 ↗
60. Soliman, M., Alzahrani, G., Alabdualataif, F., Eldwakhly, E., Alsamady, S., Aldegheishem, A., and Abdelhafeez, M.M. (2022). Impact of Ceramic Material and Preparation Design on Marginal Fit of Endocrown Restorations. Materials, 15.10.3390/ma15165592 ↗
61. Adhesive Restoration of Anterior Endodontically Treated Teeth: Influence of Post Length on Fracture Strength10.1007/s00784-013-0978-3 ↗
62. Biomechanical Behaviour of a Fractured Maxillary Incisor Restored with Direct Composite Resin Only or with Different Post Systems10.1111/j.1365-2591.2010.01782.x ↗
63. Biomechanics of Anterior Endocrowns with Different Designs and Depths: Study of Finite Elements
64. Accelerated Fatigue Resistance of Endodontically Treated Incisors without Ferrule Restored with CAD/CAM Endocrowns
65. Fracture Resistance and Microleakage of Endocrowns Utilizing Three CAD-CAM Blocks10.2341/13-143-L ↗
66. Fracture Strength of CAD/CAM Fabricated Lithium Disilicate and Resin Nano Ceramic Restorations Used for Endodontically Treated Teeth10.4012/dmj.2016-017 ↗
67. Biomechanical Behavior of Endocrowns vs Fiber Post-Core-Crown vs Cast Post-Core-Crown for the Restoration of Maxillary Central Incisors with 1 mm and 2 mm Ferrule Height: A 3D Static Linear Finite Element Analysis10.1097/MD.0000000000022648 ↗
68. Fracture Strengths of Endocrown Restorations Fabricated with Different Preparation Depths and CAD/CAM Materials10.4012/dmj.2017-035 ↗
69. The Resin-Matrix Cement Layer Thickness Resultant from the Intracanal Fitting of Teeth Root Canal Posts: An Integrative Review10.1007/s00784-021-04070-9 ↗
70. Strength Comparison of Anterior Teeth Restored with Ceramic Endocrowns vs Custom-Made Post and Cores10.1016/j.jpor.2017.08.005 ↗
71. Finite Element Analysis of the Maxillary Central Incisor with Traditional and Modified Crown Lengthening Surgery and Post-Core Restoration in Management of Crown-Root Fracture
72. Preparation Ferrule Design Effect on Endocrown Failure Resistance10.1111/jopr.12671 ↗
73. Comparison of the Pull-Out Bond Strength of Endodontically Treated Anterior Teeth with Monolithic Zirconia Endocrown and Post-and-Core Crown Restorations10.2334/josnusd.22-0288 ↗
74. Effect of Different Ferrule Designs on the Fracture Resistance and Failure Pattern of Endodontically Treated Teeth Restored with Fiber Posts and All-Ceramic Crowns10.1590/S1678-77572011000100007 ↗
75. The Finite Element Analysis of the Effect of Ferrule Height on Stress Distribution at Post-and-Core-Restored All-Ceramic Anterior Crowns10.1007/s00784-008-0217-5 ↗
76. Stress Distribution in Carbon-Post Applied with Different Composite Core Materials: A Three-Dimensional Finite Element Analysis10.1080/01694243.2017.1304172 ↗
77. Evaluation of Stress Distribution in an Endodontically Treated Tooth Restored with Four Different Post Systems and Two Different Crowns—A Finite Element Analysis10.1016/j.jobcr.2020.10.004 ↗