article·2011-01-01Open access

Preparation and properties of TiN/Si_3N_4 multiphase electroconductive ceramics

Hongjian Chen

Open full text

Abstract

TiN/Si3N4 multiphase electroconductive ceramics were prepared by pressureless sintering from slag with high titanium and Si3N4 which was synthesized by the carbothermal reduction nitridation method using iron ore tailings.Phase constitutes were analyzed by XRD.The effect of TiO2 content in initial raw materials on phase econsitutes,densification,mechanical properties and electrical conductivity were studied.The results show that the sintered samples consist of Si3N4 and TiN.The TiN phase enhances with the increase of TiO2 content in initial materials.For the composite samples sintered at 1550℃ using raw materials containing 25wt% TiO2,bulk density,hardness and flexure strength are 3.32g/cm3,8.97GPa and 79MPa,respectively.The minimum amount of TiO2 in initial raw materials is 20% for the formation of electroconductive network in the composites,of which the electric resistivity is 4.25×10-2Ω·cm.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Industrial Technology and Control Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.