The effect of stabilizer on phase composition and microstructure of ZrO_2 sizing nozzle matrix before and after sintering
Source abstract
Abstract
ZrO2 sizing nozzle matrix was researched by adding stabilizer which were 2. 8% MgO,2. 1% MgO and 2. 2%MgO + 1% Y2O3 respectively in the desilication zirconium powder. The effects of stabilizer on the composition of phase and the microstructure of ZrO2 sizing nozzle matrix before and after sintering were studied by XRD,SEM and EDS. Results showed that the content of cubic phase increased and the content of monoclinic phase decreased significantly for all samples after sintering at 1 630 ℃,the specise and feed ratio of stabilizer in raw materials made cubic and monoclinic phase variation of each sample were not the same after sintering; After sintering at 1 630 ℃,the solid solution was formed by MgO and ZrO2,with the location of MgO particle closer,the substitution degree of Mg2 +and Zr4 +was more obvious,but the diffusion and solid solution of the stabilizer were far from uniform state; For the sinteried sample combining MgO + Y2O3 stabilizer,cubic phase gained the most,and solid solution generated largest,the degree of stabilization was the highest and the combination between ZrO2 particles which have uniform size and angular shape is much close.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.