article·2006-01-01Open access

Influence of Cu and Ni additives on the electrochemical performance of V_(20)Ti_(30)Cr_(50) BCC hydrogen storage alloy

Wu Chaoling

Open full text

Abstract

The electrochemical performances of V_(20)Ti_(30)Cr_(50) alloy manually mixed or manually mixed and then sintered with Cu or Ni powders were investigated.It was found that V_(20)Ti_(30)Cr_(50) alloy electrode manually mixed with Cu powder showed a discharge capacity of 342.7mAh/g,while its discharge plateau potential was as low as-0.4V/(vs Hg/HgO).The electrode manually mixed with Ni powder had a discharge capacity of 73.4mAh/g,and didn't show any flat region in the discharge curve.After manually mixed and then sintered with Cu powder,the discharge capacity of V_(20)Ti_(30)Cr_(50) alloy electrode decreased to 30mAh/g because of the formation of Cu_4Ti_3 compounds,and the discharge plateau potential was the same as before.The discharge capacity of V_(20)Ti_(30)Cr_(50) alloy electrode manually mixed and then sintered with Ni powder increased to 209mAh/g and its discharge plateau potential increased to-0.8V.It is contributed to a tight contact between the surfaces of the alloy and the Ni powders and a formation of the catalyzing second phase TiNi during sintering.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Hydrogen Storage and Materials · Hybrid Renewable Energy Systems · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.