Analysis on microstructure and composition of SiC coated rigid carbon fibre felt prepared by silicon evaporation
Source abstract
Abstract
SiC coated rigid carbon fibre felt was produced via the direct reaction between silicon vapor and carbon stemming from graphite coating carbon fiber and substrates by silicon evaporation.Successful silicon carbide layer calls for a graphite coating given on the substrate surface by means of a slurry coating technology.The microstructural characterisation including phase structure and components,surface and profile micrograph,microhardness of SiC coating were studied by XRD,SEM,EDS and microhardness tester.The influence of evaporation time and surface roughness of graphite coating on coating and forming course of SiC coating was investigated.The main results show that only β-SiC exists on coating surface evaporated after three hours and with the increase of evaporation time,density and continuity of coating increase and cracks and holes decrease.The grain size of silicon carbide becomes smaller with low surface roughness of graphite coating as reaction matrix.The microhardness of SiC coating evaporated on high surface roughness of graphite coating was larger.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.