article·2011-01-01Open access

Effect of process conditions on strength of BeO green body prepared by gelcasting

Liu Bing

Open full text

Abstract

The effect of process conditions(monomer concentration,monomer/crosslinker ratio,reaction temperature and solids loading of suspension)on strength of green body prepared by gelcasting was investigated.The change reason of the strength and homogenization of pure gels was analyzed based on free-radical polymerization theory,and the ranges of each process parameters were achieved.The results show:the strength of pure gel and green body increase with increasing monomer concentration,but the homogenization of these prepared with higher monomer concentration are decreased,and thus monomer concentration should be between 10% and 20%(mass fraction);increasing the ratio between AM and MBAM,the strength and homogenization of gel decrease,and so the ratio between AM and MBAM is between 20∶1 and 30∶1;as the reaction temperature rises,the strength of gels enhance firstly and then decrease,but vice versa the homogenization of these,therefore,the reaction temperature lies between 20℃ and 30℃;the strength of green body reduce but homogenization increase with solids loading,and so the solids loading of suspensions for green body with enough strength should be as much high as possible.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Photopolymerization techniques and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.