article·2014-01-01Open access

Preparation and characterization of nano-TiO_2/glass fiber composite powders

Yan Ju

Open full text

Abstract

Short glass fiber powders were firstly treated by phytic acid,and then coated by nano TiO2in alcohol solution of Ti(OBu)4through peptization-hydrolyzation method.SEM observation showed that it was difficult to directly coat glass fiber with TiO2particles without phytic acid treatment,but after treated by phytic acid nano TiO2particles approximate 50nm in size were uniformly coated the surface of glass fiber forming porous film.The results of XPS showed that Ti elements on the surface of the composites were in the state of Ti 4+of TiO2,and there also existed Ti—O—Si bonds.XRD analysis revealed that nano TiO2mainly existed as anatase form.Thermal analysis showed that the weight loss of the composite powders was about 6.3%during the heating process,and no obvious endothermic peak appeared in the DTA curve.The dispersion state and the abrasive loss of the epoxy resin filled with original glass fibers and the composite powders were compared.SEM observation showed that the untreated glass fiber failed to form an effective bonding interface with epoxy resin.However,nano-TiO2/glass fiber composite powders were closely bonded with the resin due to the reaction of Ti—OH and epoxy resin during the curing process.The abrasive loss of composite coatings filled with nano-TiO2/glass fibers was decreased by 63.6%.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fiber-reinforced polymer composites · Silicone and Siloxane Chemistry · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.