article·2015-01-01Open access

Abrasion performance of epoxy resin composite filled with cenospheres

Pin Chen

Open full text

Abstract

Epoxy resin composite filled with fly ash cenospheres were synthesized.The abrasion loss and hardness of specimens were measured using an abrasion tester and a Shore hardness tester,respectively.And the effect of curing process,curing agent content and cenospheres content on abrasion performance of specimens was discussed by analyzing the micrographs of the worn surfaces.The results show that the amount of polyamide 650 obviously affects the hardness of specimens.And with the increase of polyamide 650,the hardness of specimens increases and the abrasion loss decreases.The abrasion loss of specimens are different with the different curing process.The composite obtained at the curing temperature of 120 ℃ and curing time of 1hhas the better abrasion performance.With the increase of amount of fly ash cenospheres,the abrasion loss of the specimen decreases first and then increases.When the mass fraction of cenospheres is 20wt%,the composites exhibit the best abrasion performance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Epoxy Resin Curing Processes · Synthesis and properties of polymers · Silicone and Siloxane Chemistry

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.