article·2010-01-01Open access

Study on preparation method of aluminum foam and pore structures by accumulative roll-bonding

YU Qing-bo

Open full text

Abstract

New preparation method of aluminum foam was explored by accumulative roll-bonding with L2 pure aluminum as matrix metal and TiH2 powder as blister.The results show that the ARB cycle has significant effect on porosity and average pore size of aluminum foam,so porosity increases and average pore size reduces with ARB cycles increasing.TiH2 content and foaming temperature are major influencing factors for foaming driving forcing.Foaming driving forcing enhances with TiH2 content increasing and foaming temperature improving in the range of test temperature so that both porosity and average pore size increase after foaming.L2 pure aluminum of ARB six cycles containing 0.5wt% TiH2 foams at 670℃ for 5min,through which aluminum foam with 61.4% porosity and 1.6mm average size is produced.Studies mentioned above indicate that accumulative roll-bonding is an effective preparation method of aluminum foam,which can prepare aluminum foam with pore uniformity and high porosity by parameter optimization process.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Cellular and Composite Structures · Metallurgy and Material Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.