Influence of annealing temperature on the electrochemical hydrogen storage characters of the La_(0.8)Mg_(0.2)Ni_(3.3)Co_(0.2)Si_x(x=0,0.1) alloys
Source abstract
Abstract
The La0.8Mg0.2Ni3.3Co0.2Six(x=0,0.1) electrode alloys were prepared by using a vacuum induction furnace, immediately,a part of the as-cast alloys was annealed at 900,950,1000 and 1050℃ in vacuum for 8h. The phase structures of the as-cast and annealed alloys were checked out by XRD,what was more,the electrochemical hydrogen storage characteristics of the as-cast and annealed alloys were also examined. The results indicate that the as-cast and annealed alloys have a multiphase structure,involving two major phases of( La,Mg)2Ni7 and LaNi5 as well as a residual phase of LaNi3. There was not any change on the phase composition after annealing treatment,which was opposite to the content of the two major phases,changing a lot. Meanwhile,the lattice constants and cell volumes mount up with the growing of the annealing temperature. The as-cast and annealed alloys have a well activation properties,which reaches the maximum discharge capacity at the first cycle. The electrochemical cycle stability was markedly improved by annealing treatment,however,the discharge capacity first mounts up and then goes down with the annealing temperature rising. Which adjust well to the values of electrochemical kinetics by the tests of HRD,EIS and H-diffusion coefficient.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Hydrogen Storage and Materials · Metallurgical and Alloy Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.