article·2012-01-01Open access

Specific research on the radar absorbing coating

Xie Chun-se

Open full text

Abstract

Taken the triple-layer radar absorbing coating as an example,we used error factor to simulate interference and used SNR(signal to noise ratio) as an index to evaluate the quality characteristic of the product.Based on the orthogonal table of L9(34),we arrange the controllable factors and based on the orthogonal table of L36(23×313),we arrange the error factors.According to taguchi method and cross-products of inner and outer arrays,we made specific research.The research shows that when the electromagnetic parameters of the bottom layer was e=22.18-j1.82,μ=1.09-j1.81,the thickness of the bottom layer was 0.3mm;electromagnetic parameters of the mesosphere was e=6.7-j0.64,μ=0.54-j0.31,the thickness of the mesosphere was 0.7mm;electromagnetic parameters of the top layer was e=10.77-j1.15,μ=1.67-j1.23,the thickness of the top layer was 0.2mm;the frequency was 10GHz and the thickness of the coating fluctuates 10%,the average reflectivity was less than-10dB.It has a faculty of resisting the fluctuation of thickness and electromagnetic parameters.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electromagnetic Compatibility and Measurements · Electromagnetic wave absorption materials · Advanced Antenna and Metasurface Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.