article·2013-01-01Open access

Fabrication and properties of porous Al-Si12 alloy

Mingwei Zhao

Open full text

Abstract

Porous Al-Si12 alloys with porosity of 44%-76% and average cell diameter of 30-110μm were fabricated by the vacuum-pressure sintering-dissolution processing.The preparation processing,pore structure,bending strength and filtration property of the fabricated porous Al-Si12 alloy were studied.The results showed that the bending strength of porous Al-Si12 alloy could be promoted evidently by applying a certain of vacuum sinter pressure,the optimal processing parameters were deduced experimentally at cold pressure of 500MPa,sinter temperature of 565℃,sinter time of 2h and sinter pressure of 150-200MPa.With the increasing of porosity and average cell diameter,the relative permeability coefficient of porous Al-Si12 alloy increased.Porous Al-Si12 alloy has a higher bending strength than the similar cell structure porous Al.Compared with the similar cell structure porous stainless steel and porous Al,the porous Al-Si12 alloy possesses a better filtration property.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Aluminum Alloys Composites Properties · Metallurgy and Material Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.