article·2013-01-01Open access

Impact of adding Si on the cycle stability of the La-Mg-Ni-based A_2 B_7-type electrode alloy

Yanghua Zhang

Open full text

Abstract

In order to improve the cycle stability of the La-Mg-Ni-based A2 B7-type electrode alloy,a small amount of Si has been added to the alloy. The compositions of La 0.8 Mg 0.2 Ni 3.3 Co 0.2 Si x( x = 0-0.2) alloys were prepared by using a vacuum induction furnace,and a part of the alloys was annealed at 900,950,1000 and 1050℃ in vacuum. The microstructure of the as-cast and annealed alloys were examined by XRD and SEM,what's more,the electrochemical cycle stability of the as-cast and quenched alloys has been checked out. The results indicated that the as-cast and quenched alloys had a multiphase structure,including two major phases of( La,Mg)2 Ni7 and LaNi 5 as well as a residual phase of LaNi 3. The additive Si leaded to a increase in LaNi 5 phase and a decrease in( La,Mg)2 Ni7 phase. Additionally,with the increase of Si content from 0 to 0. 2,the capacity retention rate( S100) of as-cast alloys enhanced from 64. 2% to 73. 1%,meanwhile,the capacity remaining rate( S100) of the alloys quenched at 950℃ grew from 80.3% to 93.7%.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgical and Alloy Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.