Study on MgO modified asbestos paper separator for thermal batteries
Source abstract
Abstract
MgO modified asbestos paper was prepared by high temperature decomposition of magnesium acetate precursor and used as separator for thermal battery.A sing cell was fabricated with a NiCl2 film cathode,the modified asbestos paper loaded with an eutectic moten electrolyte LiCl-LiBr-KBr and a LiB anode.The influences of the loadings of MgO and electrolyte in the separator and operating temperature on the discharge performances of the single cells were studied.The results indicates that the single cell employing the separator with a MgO loading of 5.2mg/cm2 and an electrolyte loading of 53mg/cm2 shows the best discharge performance.And at current densities of 50,100 and 200mA/cm2,the respective cell voltage can reach 2.4557,2.4375and2.3285 V.The performance was comparable with that of the cell using the cold pressed electrolyte pellet.A thermal battery prototype with 5single cells was fabricated and at a discharge current density of 100mA/cm2,the obtained voltage rise-time was 0.26 sand working time was 110.0swith a cut-off voltage of its 80% peak voltage.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Battery Technologies Research · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.