article·2008-01-01Open access

Study on the mechanical milling for the mixtures of SmCo_5 and FeCo ribbons

Feng Xu

Open full text

Abstract

SmCo5 and FeCo melt-spun ribbons were prepareed at Mo weel surface speed of V=35m/s,then the mixtures of these two kind of ribbons in a ratio of 70(SmCo5)/30(FeCo)wt% were mechanically milled.Several milling times were used ranging from 15-240min,and the microstructure evolution and magnetic properties of the as-milled powder were studied.The XRD analysis of the sanples show that the as-milled powdesr are consisted of SmCo5 phase and α-(Fe,Co) oncee;The grain size of SmCo5 is of 6.5nm and that of the α-(Fe,Co) is of 23.9nm after 15min milling,and both of them are less than 10nm after 120min or longer milling,.The VSM tests show that the magnetic hysteresis loops for the samples after 60min or longer milling exhibits the magnetization characteristics of single hard magnetic phase;During the ranging from 15-240min,the magnetization strengh of the as-milled powders increases from 0.92T for 15min milling to 1.3T for 240min milling with the lengthening of the milling time,while the remanence and coecivity values recheachs their maximums for the milling time of 90min respectively,which is 0.32T and 9.6×104A/m.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnetic Properties of Alloys · Magnetic Properties and Applications · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.