Fabrication of polylactide porous scaffolds by frozen extraction phase separation method
Source abstract
Abstract
To prepare the polylactide(PLA) porous scaffolds whose structure and property could meet the needs of bone tissue engineering,a series of PLA porous scaffolds were prepared by frozon extraction phase separation method with using 1,4-dioxane and water as the blend solvent and poly(ethylene glycol)(PEG) as the porogen.The effect of solvent composition,PLA concentration and the amount of PEG on the structure and property were studied.The results showed that the addition of PEG was benificial for forming three-dimensionally porous scaffolds.With the PEG amount increasing,the porosity slightly increased while the compressive strength improved.With the increasing of PLA mass fraction,the porosity decreased obviously while the compressive strength improved.When the mass fraction of water is no more than 12wt%-60wt%,the mass fraction of PLA is no more than 12.5wt% and the mass fraction of PEG is no more than 20wt%,porous throughout scaffold materials with satisfying porosity and mechanical property could form.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty · Electrospun Nanofibers in Biomedical Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.