The effect of Al~(3+) concentration on the properties of boehmites synthesized by hydrothermal homogeneous precipitation method
Source abstract
Abstract
Hydrothermal homogeneous precipitation of very light boehmites with tape density of 127.1~234.6kg/m~3 was carried out in aluminum sulfate-excess urea aqueous solutions containing 0.05~0.40mol/L Al~(3+). The role of initial Al~(3+) concentration on the reactions and characteristics of obtained powders were studied by ICP-AES, XRD, FT-IR, SEM and BET. It was determined that the precipitation of aluminum hydroxide gel was nearly completed at 140℃ and farther increasing temperature would result in the formation of porous quasi-sphere agglomeration covered with needle clusters. With the increase of Al~(3+) concentration from 0.05mol/L to 0.40mol/L, crystallinity of the powders was gradually improved, but the spherical structure was slowly damaged and the specific surface area decreased from 104.3m~2·g to 59.1m~2·g. The weight loss of precursor powders calcined at 725℃ for 2h reduced from 18.4% to 15.4% that was almost equal to the theoretical water content of boehmite. The obtained γ-Al_2O_3 powders had the same shape with their precursors. Although their specific surface area decreased from 159.3m~2·g to 115.5m~2·g, each was greatly higher than its corresponding precursor. It was shown that it was possible to prepare boehmite powders having very low density, high specific surface area and almost-spherical agglomeration covered with needle clusters by lowering Al~(3+) concentration while the [Urea]/[ Al~(3+)] ratio was kept at a value of 2 at 180℃.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Mesoporous Materials and Catalysis · Aerogels and thermal insulation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.