Corrosion and passivation of copper in the CMP slurry of CH_3NH_2-K_3[Fe(CN)_6]
Source abstract
Abstract
The influence of the corrosive medium and passivator concentrations on the corrosion and passivation of copper was studied by electrochemical messurement technologies. The components of the passive films were analysed with XPS. The behavour of abration, which was performed with polishing pressure and rotationl velocity, and repassivation on the surface of copper was invesitigated. The polarization curves of copper during chemical mechanical polishing were messured. The results indicated that, copper was passivated very easily in the methylamine aqueous medium with K_3Fe(CN)_6, the main components of the passive films were Cu_4[Fe(CN)_6] and a little Cu_2O. The abration characteristics of films varied with the components concentrations. Whether difficult or easy the passive films were abraded depended on the properties of the films, the polishing pressures and rotational velocities. Because of the films being abraded during polishing, the corrosion rate was quickened and the corrosion current density was increased greatly. The slurry of 0.1% methylamine aqueous solution+0.5%K_3Fe(CN)_6+5%Al_2O_3 was feasible.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Advanced Machining and Optimization Techniques · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.