Quasi-static and high strain rate tensile mechanical behavior of V-5Cr-5Ti alloy
Source abstract
Abstract
In this work the static and dynamic tensile properties of vanadium V-5Cr-5Ti alloy were investigated at strain rates ranged from 3. 3×10-5 to 1. 2×102/s, coefficient of strain rate sensitivity was obtained. The material microstructures were analyzed using optical microscope, SEM, TEM, XRD and EDS. Results show that the yield strength a increases with strain rate. The brittle-ductile transition strain-rate is about 101 to 102/s, from the quasi-static to dynamic strain rates higher strain rate sensitivity coefficient. At room temperature the tensile fracture at a low strain rate occurs via mixed modes of microvoid aggregating and transgranular cracking;at high strain rate the fracture occurs via a brittle mode. The analysis by TEM, XRD and EDX shows the existence of lath martensite, and on there exits precipitate phase of Ti(O, C, N) in grain boundaries.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.