Effects of annealing temperature on microstructures and magnetic properties of SmCo films
Source abstract
Abstract
SmCo films were prepared by DC magnetron sputtering and annealed subsequently.The effects of annealing temperature on its microstructures and magnetic performances were investigated.XRD patterns show that the separation of SmCo_5 phase and Sm_2Co_(17) phase can be artificially controlled according to our requirement.SmCo_5 phase is separated at 600℃ firstly and at 700℃ for Sm_2Co_(17) phase separation.The film SEM images show that the hexagonal SmCo_5 phase and rhombohedral Sm_2Co_(17) phase are all separated out when annealing temperature is higher than 900℃.With the increase of annealing temperature,the size of the grain is increased.However,when temperature is increased up to 940℃,grain size is decreased,and increased again at 980℃.Compared to as-deposited films,annealed films perpendicular coercivities,remanences and maximum magnetic energy products measured by VSM are all increased.The maximum coercivity and remanence can be obtained at 960℃,and the maximum magnetic energy product can be obtained at 800℃.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnetic Properties of Alloys · Rare-earth and actinide compounds · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.