Friction and wear characteristics of Fe-based bulk metallic glasses
Source abstract
Abstract
The amorphous alloy rods with a diameter of 5mm of Fe41Co7Cr15Mo14C15B6Y2 were prepared by copper mold with sucking casting method.The characteristics of dry wear behavior for Fe-based bulk metallic glasses and GCr15 steel were investigated using pin-tray equipment at the ambient temperature in this paper.Worn surface morphologies of the samples were observed on a scanning electron microscope.Friction and wear characteristics of the Fe-based bulk metallic were studied and compared with GCr15 steel.Result indicated that the Fe-based bulk amorphous alloy shows well wear-resistance.With the wear distance extended,Fe-based bulk amorphous alloy shows different abrasive mechanism on the 30N load.The friction coefficient of the Fe-based bulk metallic glasses and GCr15 steel are both between 0.5 and 0.8.The two kinds of materials have the similar wear-resistance.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Metal Alloys Wear and Properties · Metallurgy and Material Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.