Investigation on Densification of ITO Ceramic Target by Using HIP Technique
Source abstract
Abstract
ITO complex powders were synthesized by using chemical coprecipitation method. Such powders were densified by using HIP technique, where the carbon steel was used as capsule and Cu foil as separation layer set between capsule and green body compacted using CIP technique. The effect of main parameters of HIP technique on the densification of ITO ceramic target was investigated. The experimental results showed that the relative density had a peak value at the temperature of about 1000℃ and increased with the pressure, and that the relative density increased with time when lower temperature was used, but decreased with time when higher temperature was used. Additionally, the decomposition behavior of ITO at high temperature and its effect on the densification were studied. Why ITO ceramics were semiconducted by removing partial oxygen from ITO complex powders was also explained.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · ZnO doping and properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.